diff mbox series

[U-Boot,2/2] rockchip: Init driver otg_data for rk3288 usb phy

Message ID 20191016091332.31436-2-kever.yang@rock-chips.com
State Accepted
Commit 17224b325f533917a02d4912c05543f163a66b71
Delegated to: Kever Yang
Headers show
Series [U-Boot,1/2] rockchip: usb: Migrate to use ofnode | expand

Commit Message

Kever Yang Oct. 16, 2019, 9:13 a.m. UTC 
RK3288 needs to init the otg_data in board level to make the phy driver
work.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

 arch/arm/mach-rockchip/board.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c
index c4b0b9dfe2..c90eb976d0 100644
--- a/arch/arm/mach-rockchip/board.c
+++ b/arch/arm/mach-rockchip/board.c
@@ -82,6 +82,34 @@  int board_usb_init(int index, enum usb_init_type init)
 	}
 	otg_data.regs_otg = ofnode_get_addr(node);
 
+#ifdef CONFIG_ROCKCHIP_RK3288
+	int ret;
+	u32 phandle, offset;
+	ofnode phy_node;
+
+	ret = ofnode_read_u32(node, "phys", &phandle);
+	if (ret)
+		return ret;
+
+	node = ofnode_get_by_phandle(phandle);
+	if (!ofnode_valid(node)) {
+		debug("Not found usb phy device\n");
+		return -ENODEV;
+	}
+
+	phy_node = ofnode_get_parent(node);
+	if (!ofnode_valid(node)) {
+		debug("Not found usb phy device\n");
+		return -ENODEV;
+	}
+
+	otg_data.phy_of_node = phy_node;
+	ret = ofnode_read_u32(node, "reg", &offset);
+	if (ret)
+		return ret;
+	otg_data.regs_phy =  offset +
+		(u32)syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+#endif
 	return dwc2_udc_probe(&otg_data);
 }