[v1,06/17] dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30
diff mbox series

Message ID 20191015211618.20758-7-digetx@gmail.com
State Changes Requested
Headers show
Series
  • NVIDIA Tegra20 CPUFreq driver major update
Related show

Commit Message

Dmitry Osipenko Oct. 15, 2019, 9:16 p.m. UTC
Add device-tree binding that describes CPU frequency-scaling hardware
found on NVIDIA Tegra20/30 SoCs.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../cpufreq/nvidia,tegra20-cpufreq.txt        | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt

Comments

Viresh Kumar Oct. 16, 2019, 5:13 a.m. UTC | #1
On 16-10-19, 00:16, Dmitry Osipenko wrote:
> Add device-tree binding that describes CPU frequency-scaling hardware
> found on NVIDIA Tegra20/30 SoCs.
> 
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  .../cpufreq/nvidia,tegra20-cpufreq.txt        | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
> 
> diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
> new file mode 100644
> index 000000000000..daeca6ae6b76
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
> @@ -0,0 +1,56 @@
> +Binding for NVIDIA Tegra20 CPUFreq
> +==================================
> +
> +Required properties:
> +- clocks: Must contain an entry for the CPU clock.
> +  See ../clocks/clock-bindings.txt for details.
> +- operating-points-v2: See ../bindings/opp/opp.txt for details.
> +- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details.
> +
> +For each opp entry in 'operating-points-v2' table:
> +- opp-supported-hw: Two bitfields indicating:
> +	On Tegra20:
> +	1. CPU process ID mask
> +	2. SoC speedo ID mask
> +
> +	On Tegra30:
> +	1. CPU process ID mask
> +	2. CPU speedo ID mask
> +
> +	A bitwise AND is performed against these values and if any bit
> +	matches, the OPP gets enabled.
> +
> +- opp-microvolt: CPU voltage triplet.
> +
> +Optional properties:
> +- cpu-supply: Phandle to the CPU power supply.
> +
> +Example:
> +	regulators {
> +		cpu_reg: regulator0 {
> +			regulator-name = "vdd_cpu";
> +		};
> +	};
> +
> +	cpu0_opp_table: opp_table0 {
> +		compatible = "operating-points-v2";
> +
> +		opp@456000000 {
> +			clock-latency-ns = <125000>;
> +			opp-microvolt = <825000 825000 1125000>;
> +			opp-supported-hw = <0x03 0x0001>;
> +			opp-hz = /bits/ 64 <456000000>;
> +		};
> +
> +		...
> +	};
> +
> +	cpus {
> +		cpu@0 {
> +			compatible = "arm,cortex-a9";
> +			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
> +			operating-points-v2 = <&cpu0_opp_table>;
> +			cpu-supply = <&cpu_reg>;
> +			#cooling-cells = <2>;
> +		};
> +	};

LGTM.
Viresh Kumar Oct. 17, 2019, 2:32 a.m. UTC | #2
On 16-10-19, 00:16, Dmitry Osipenko wrote:
> Add device-tree binding that describes CPU frequency-scaling hardware
> found on NVIDIA Tegra20/30 SoCs.
> 
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  .../cpufreq/nvidia,tegra20-cpufreq.txt        | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
> 
> diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
> new file mode 100644
> index 000000000000..daeca6ae6b76
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
> @@ -0,0 +1,56 @@
> +Binding for NVIDIA Tegra20 CPUFreq
> +==================================
> +
> +Required properties:
> +- clocks: Must contain an entry for the CPU clock.
> +  See ../clocks/clock-bindings.txt for details.
> +- operating-points-v2: See ../bindings/opp/opp.txt for details.
> +- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details.
> +
> +For each opp entry in 'operating-points-v2' table:
> +- opp-supported-hw: Two bitfields indicating:
> +	On Tegra20:
> +	1. CPU process ID mask
> +	2. SoC speedo ID mask
> +
> +	On Tegra30:
> +	1. CPU process ID mask
> +	2. CPU speedo ID mask
> +
> +	A bitwise AND is performed against these values and if any bit
> +	matches, the OPP gets enabled.
> +
> +- opp-microvolt: CPU voltage triplet.
> +
> +Optional properties:
> +- cpu-supply: Phandle to the CPU power supply.
> +
> +Example:
> +	regulators {
> +		cpu_reg: regulator0 {
> +			regulator-name = "vdd_cpu";
> +		};
> +	};
> +
> +	cpu0_opp_table: opp_table0 {
> +		compatible = "operating-points-v2";
> +
> +		opp@456000000 {
> +			clock-latency-ns = <125000>;
> +			opp-microvolt = <825000 825000 1125000>;
> +			opp-supported-hw = <0x03 0x0001>;
> +			opp-hz = /bits/ 64 <456000000>;
> +		};
> +
> +		...
> +	};
> +
> +	cpus {
> +		cpu@0 {
> +			compatible = "arm,cortex-a9";
> +			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
> +			operating-points-v2 = <&cpu0_opp_table>;
> +			cpu-supply = <&cpu_reg>;
> +			#cooling-cells = <2>;
> +		};
> +	};

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
new file mode 100644
index 000000000000..daeca6ae6b76
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
@@ -0,0 +1,56 @@ 
+Binding for NVIDIA Tegra20 CPUFreq
+==================================
+
+Required properties:
+- clocks: Must contain an entry for the CPU clock.
+  See ../clocks/clock-bindings.txt for details.
+- operating-points-v2: See ../bindings/opp/opp.txt for details.
+- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details.
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitfields indicating:
+	On Tegra20:
+	1. CPU process ID mask
+	2. SoC speedo ID mask
+
+	On Tegra30:
+	1. CPU process ID mask
+	2. CPU speedo ID mask
+
+	A bitwise AND is performed against these values and if any bit
+	matches, the OPP gets enabled.
+
+- opp-microvolt: CPU voltage triplet.
+
+Optional properties:
+- cpu-supply: Phandle to the CPU power supply.
+
+Example:
+	regulators {
+		cpu_reg: regulator0 {
+			regulator-name = "vdd_cpu";
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp@456000000 {
+			clock-latency-ns = <125000>;
+			opp-microvolt = <825000 825000 1125000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		...
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&cpu_reg>;
+			#cooling-cells = <2>;
+		};
+	};