@@ -42,7 +42,8 @@
#include <linux/swab.h>
#include <linux/slab.h>
-#define VERSION "0.07"
+#define VERSION "1.0"
+#define DRIVER_VERSION 0x01
#define PTAG "solos-pci"
#define CONFIG_RAM_SIZE 128
@@ -57,16 +58,20 @@
#define FPGA_MODE 0x5C
#define FLASH_MODE 0x58
#define GPIO_STATUS 0x54
+#define DRIVER_VER 0x50
#define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
#define DATA_RAM_SIZE 32768
#define BUF_SIZE 2048
#define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
-#define FPGA_PAGE 528 /* FPGA flash page size*/
-#define SOLOS_PAGE 512 /* Solos flash page size*/
-#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
-#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
+/* Old boards use ATMEL AD45DB161D flash */
+#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
+#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
+#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
+#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
+/* Current boards use M25P/M25PE SPI flash */
+#define SPI_FLASH_BLOCK (256 * 64)
#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
@@ -128,6 +133,7 @@ struct solos_card {
int using_dma;
int fpga_version;
int buffer_size;
+ int atmel_flash;
};
@@ -631,16 +637,25 @@ static int flash_upgrade(struct solos_card *card, int chip)
switch (chip) {
case 0:
fw_name = "solos-FPGA.bin";
- blocksize = FPGA_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_FPGA_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
break;
case 1:
fw_name = "solos-Firmware.bin";
- blocksize = SOLOS_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_SOLOS_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
break;
case 2:
if (card->fpga_version > LEGACY_BUFFERS){
fw_name = "solos-db-FPGA.bin";
- blocksize = FPGA_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_FPGA_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
@@ -650,7 +665,10 @@ static int flash_upgrade(struct solos_card *card, int chip)
case 3:
if (card->fpga_version > LEGACY_BUFFERS){
fw_name = "solos-Firmware.bin";
- blocksize = SOLOS_BLOCK;
+ if (card->atmel_flash)
+ blocksize = ATMEL_SOLOS_BLOCK;
+ else
+ blocksize = SPI_FLASH_BLOCK;
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
@@ -695,9 +713,13 @@ static int flash_upgrade(struct solos_card *card, int chip)
/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
- /* Copy block to buffer, swapping each 16 bits */
+ /* Copy block to buffer, swapping each 16 bits for Atmel flash */
for(i = 0; i < blocksize; i += 4) {
- uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
+ uint32_t word;
+ if (card->atmel_flash)
+ word = swahb32p((uint32_t *)(fw->data + offset + i));
+ else
+ word = *(uint32_t *)(fw->data + offset + i);
if(card->fpga_version > LEGACY_BUFFERS)
iowrite32(word, FLASH_BUF + i);
else
@@ -1249,6 +1271,11 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
db_fpga_upgrade = db_firmware_upgrade = 0;
}
+ /* Stopped using Atmel flash after 0.03-38 */
+ if (fpga_ver < 39)
+ card->atmel_flash = 1;
+ else
+ card->atmel_flash = 0;
if (card->fpga_version >= DMA_SUPPORTED){
card->using_dma = 1;
} else {
@@ -1256,6 +1283,8 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Set RX empty flag for all ports */
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
}
+ /* New FPGAs require driver version before permitting flash upgrades */
+ iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
data32 = ioread32(card->config_regs + PORTS);
card->nr_ports = (data32 & 0x000000FF);
Newer Geos ADSL2+ routers have different SPI flash. The FPGA on these boards require driver version = 1 to enable flash upgrades so old drivers can't corrupt new boards. Signed-off-by: Nathan Williams <nathan@traverse.com.au> --- drivers/atm/solos-pci.c | 51 ++++++++++++++++++++++++++++++++++++---------- 1 files changed, 40 insertions(+), 11 deletions(-)