| Message ID | 20191015123854.12039-1-kwolf@redhat.com |
|---|---|
| State | New |
| Headers | show |
| Series | doc: Describe missing generic -blockdev options | expand |
On Tue, 15 Oct 2019 at 13:40, Kevin Wolf <kwolf@redhat.com> wrote: > > We added more generic options after introducing -blockdev and forgot to > update the documentation (man page and --help output) accordingly. Do > that now. > > Signed-off-by: Kevin Wolf <kwolf@redhat.com> > --- > qemu-options.hx | 19 ++++++++++++++++++- > 1 file changed, 18 insertions(+), 1 deletion(-) > > diff --git a/qemu-options.hx b/qemu-options.hx > index 793d70ff93..9f6aa3dde3 100644 > --- a/qemu-options.hx > +++ b/qemu-options.hx > @@ -849,7 +849,8 @@ ETEXI > DEF("blockdev", HAS_ARG, QEMU_OPTION_blockdev, > "-blockdev [driver=]driver[,node-name=N][,discard=ignore|unmap]\n" > " [,cache.direct=on|off][,cache.no-flush=on|off]\n" > - " [,read-only=on|off][,detect-zeroes=on|off|unmap]\n" > + " [,read-only=on|off][,auto-read-only=on|off]\n" > + " [,force-share=on|off][,detect-zeroes=on|off|unmap]\n" > " [,driver specific parameters...]\n" > " configure a block backend\n", QEMU_ARCH_ALL) > STEXI > @@ -885,6 +886,22 @@ name is not intended to be predictable and changes between QEMU invocations. > For the top level, an explicit node name must be specified. > @item read-only > Open the node read-only. Guest write attempts will fail. > + > +Note that some block drivers support only read-only access, either generally or > +in certain configurations. In this case, the default value > +@option{read-only=off} does not work and the option must be specified > +explicitly. > +@item auto-read-only > +If @option{auto-read-only=on} is set, QEMU is allowed not to open the image > +read-write even if @option{read-only=off} is requested, but fall back to > +read-only instead (and switch between the modes later), e.g. depending on > +whether the image file is writable or whether a writing user is attached to the > +node. > +@item force-share > +Override the image locking system of QEMU and force the node to allowing > +sharing all permissions with other uses. Grammar nit: "to allow sharing"; but maybe the phrasing could be clarified anyway -- I'm not entirely sure what 'sharing permissions" would be. The first part of the sentence suggests this option is "force the image file to be opened even if some other QEMU instance has it open already", but the second half soudns like "don't lock the image, so that some other use later is allowed to open it" ? Or is it both, or something else? > + > +Enabling @option{force-share=on} requires @option{read-only=on}. thanks -- PMM
On 10/15/19 7:38 AM, Kevin Wolf wrote: > We added more generic options after introducing -blockdev and forgot to > update the documentation (man page and --help output) accordingly. Do > that now. > > Signed-off-by: Kevin Wolf <kwolf@redhat.com> > --- > qemu-options.hx | 19 ++++++++++++++++++- > 1 file changed, 18 insertions(+), 1 deletion(-) > > @@ -885,6 +886,22 @@ name is not intended to be predictable and changes between QEMU invocations. > For the top level, an explicit node name must be specified. > @item read-only > Open the node read-only. Guest write attempts will fail. > + > +Note that some block drivers support only read-only access, either generally or > +in certain configurations. In this case, the default value > +@option{read-only=off} does not work and the option must be specified > +explicitly. > +@item auto-read-only > +If @option{auto-read-only=on} is set, QEMU is allowed not to open the image > +read-write even if @option{read-only=off} is requested, but fall back to > +read-only instead (and switch between the modes later), e.g. depending on > +whether the image file is writable or whether a writing user is attached to the > +node. Hard to read. Maybe: If @option{auto-read-only=on} is set, QEMU may fall back to read-only usage even when @option{read-only=off} is requested, or even switch between modes as needed, e.g. depending on whether the image file is writable or whether a writing user is attached to the node.
Am 15.10.2019 um 15:55 hat Peter Maydell geschrieben: > On Tue, 15 Oct 2019 at 13:40, Kevin Wolf <kwolf@redhat.com> wrote: > > > > We added more generic options after introducing -blockdev and forgot to > > update the documentation (man page and --help output) accordingly. Do > > that now. > > > > Signed-off-by: Kevin Wolf <kwolf@redhat.com> > > --- > > qemu-options.hx | 19 ++++++++++++++++++- > > 1 file changed, 18 insertions(+), 1 deletion(-) > > > > diff --git a/qemu-options.hx b/qemu-options.hx > > index 793d70ff93..9f6aa3dde3 100644 > > --- a/qemu-options.hx > > +++ b/qemu-options.hx > > @@ -849,7 +849,8 @@ ETEXI > > DEF("blockdev", HAS_ARG, QEMU_OPTION_blockdev, > > "-blockdev [driver=]driver[,node-name=N][,discard=ignore|unmap]\n" > > " [,cache.direct=on|off][,cache.no-flush=on|off]\n" > > - " [,read-only=on|off][,detect-zeroes=on|off|unmap]\n" > > + " [,read-only=on|off][,auto-read-only=on|off]\n" > > + " [,force-share=on|off][,detect-zeroes=on|off|unmap]\n" > > " [,driver specific parameters...]\n" > > " configure a block backend\n", QEMU_ARCH_ALL) > > STEXI > > @@ -885,6 +886,22 @@ name is not intended to be predictable and changes between QEMU invocations. > > For the top level, an explicit node name must be specified. > > @item read-only > > Open the node read-only. Guest write attempts will fail. > > + > > +Note that some block drivers support only read-only access, either generally or > > +in certain configurations. In this case, the default value > > +@option{read-only=off} does not work and the option must be specified > > +explicitly. > > +@item auto-read-only > > +If @option{auto-read-only=on} is set, QEMU is allowed not to open the image > > +read-write even if @option{read-only=off} is requested, but fall back to > > +read-only instead (and switch between the modes later), e.g. depending on > > +whether the image file is writable or whether a writing user is attached to the > > +node. > > +@item force-share > > +Override the image locking system of QEMU and force the node to allowing > > +sharing all permissions with other uses. > > Grammar nit: "to allow sharing"; but maybe the phrasing could > be clarified anyway -- I'm not entirely sure what 'sharing > permissions" would be. The first part of the sentence suggests > this option is "force the image file to be opened even if some > other QEMU instance has it open already", but the second half > soudns like "don't lock the image, so that some other use later > is allowed to open it" ? Or is it both, or something else? It's more the latter. Open the image file and allow other instances to have it open as well (existing and future instances), but still error out if the other instance doesn't allow sharing. I'm open for suggestions on how to phrase this better. Kevin
On 10/15/19 9:05 AM, Kevin Wolf wrote: >>> +@item force-share >>> +Override the image locking system of QEMU and force the node to allowing >>> +sharing all permissions with other uses. >> >> Grammar nit: "to allow sharing"; but maybe the phrasing could >> be clarified anyway -- I'm not entirely sure what 'sharing >> permissions" would be. The first part of the sentence suggests >> this option is "force the image file to be opened even if some >> other QEMU instance has it open already", but the second half >> soudns like "don't lock the image, so that some other use later >> is allowed to open it" ? Or is it both, or something else? > > It's more the latter. Open the image file and allow other instances to > have it open as well (existing and future instances), but still error > out if the other instance doesn't allow sharing. > > I'm open for suggestions on how to phrase this better. Here's a shot (although I'm not 100% certain I've captured the nuances correctly): Override the image locking system of QEMU by forcing the node to utilize weaker shared access for permissions where it would normally request exclusive access. When there is the potential for multiple instances to have the same file open (whether this invocation of qemu is the first or the second instance), both instances must permit shared access for the second instance to succeed at opening the file.
diff --git a/qemu-options.hx b/qemu-options.hx index 793d70ff93..9f6aa3dde3 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -849,7 +849,8 @@ ETEXI DEF("blockdev", HAS_ARG, QEMU_OPTION_blockdev, "-blockdev [driver=]driver[,node-name=N][,discard=ignore|unmap]\n" " [,cache.direct=on|off][,cache.no-flush=on|off]\n" - " [,read-only=on|off][,detect-zeroes=on|off|unmap]\n" + " [,read-only=on|off][,auto-read-only=on|off]\n" + " [,force-share=on|off][,detect-zeroes=on|off|unmap]\n" " [,driver specific parameters...]\n" " configure a block backend\n", QEMU_ARCH_ALL) STEXI @@ -885,6 +886,22 @@ name is not intended to be predictable and changes between QEMU invocations. For the top level, an explicit node name must be specified. @item read-only Open the node read-only. Guest write attempts will fail. + +Note that some block drivers support only read-only access, either generally or +in certain configurations. In this case, the default value +@option{read-only=off} does not work and the option must be specified +explicitly. +@item auto-read-only +If @option{auto-read-only=on} is set, QEMU is allowed not to open the image +read-write even if @option{read-only=off} is requested, but fall back to +read-only instead (and switch between the modes later), e.g. depending on +whether the image file is writable or whether a writing user is attached to the +node. +@item force-share +Override the image locking system of QEMU and force the node to allowing +sharing all permissions with other uses. + +Enabling @option{force-share=on} requires @option{read-only=on}. @item cache.direct The host page cache can be avoided with @option{cache.direct=on}. This will attempt to do disk IO directly to the guest's memory. QEMU may still perform an
We added more generic options after introducing -blockdev and forgot to update the documentation (man page and --help output) accordingly. Do that now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- qemu-options.hx | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)