[U-Boot,RESEND,v1,2/3] configs: dra7xx_evm: Add Kconfigs for SPL_DFU bootmode
diff mbox series

Message ID 20191009103520.18109-3-jjhiblot@ti.com
State Accepted
Delegated to: Tom Rini
Headers show
Series
  • Add support for DFU boot to DRA7-based EVMs
Related show

Commit Message

Jean-Jacques Hiblot Oct. 9, 2019, 10:35 a.m. UTC
From: Faiz Abbas <faiz_abbas@ti.com>

Enable configs for supporting SPL_DFU bootmode.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---

 configs/dra7xx_evm_defconfig    | 6 ++++++
 configs/dra7xx_hs_evm_defconfig | 6 ++++++
 2 files changed, 12 insertions(+)

Comments

Tom Rini Oct. 26, 2019, 12:06 a.m. UTC | #1
On Wed, Oct 09, 2019 at 12:35:19PM +0200, Jean-Jacques Hiblot wrote:

> From: Faiz Abbas <faiz_abbas@ti.com>
> 
> Enable configs for supporting SPL_DFU bootmode.
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>

Applied to u-boot/master, thanks!

Patch
diff mbox series

diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 868030d34c..a09d0733ca 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -25,8 +25,11 @@  CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
 CONFIG_CMD_SPL=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
@@ -85,6 +88,7 @@  CONFIG_MII=y
 CONFIG_DRIVER_TI_CPSW=y
 CONFIG_SPL_PHY=y
 CONFIG_PIPE3_PHY=y
+CONFIG_SPL_PIPE3_PHY=y
 CONFIG_OMAP_USB2_PHY=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_PMIC_LP873X=y
@@ -107,7 +111,9 @@  CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 7a5c3e72d4..e2f0476f9e 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -30,8 +30,11 @@  CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 # CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_MTDPARTS=y
@@ -88,6 +91,7 @@  CONFIG_MII=y
 CONFIG_DRIVER_TI_CPSW=y
 CONFIG_SPL_PHY=y
 CONFIG_PIPE3_PHY=y
+CONFIG_SPL_PIPE3_PHY=y
 CONFIG_OMAP_USB2_PHY=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_PMIC_LP873X=y
@@ -110,7 +114,9 @@  CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451