diff mbox series

[2/2] clk: ast2600: Add RMII RCLK gates for all four MACs

Message ID 20191008113553.13662-3-andrew@aj.id.au
State Not Applicable, archived
Headers show
Series clk: ast2600: Expose RMII RCLK for MACs 1-4 | expand

Commit Message

Andrew Jeffery Oct. 8, 2019, 11:35 a.m. UTC 
RCLK is a fixed 50MHz clock derived from HPLL/HCLK that is described by a
single gate for each MAC.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/clk/clk-ast2600.c | 47 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

Comments

Joel Stanley Oct. 8, 2019, 12:39 p.m. UTC | #1 
On Tue, 8 Oct 2019 at 11:35, Andrew Jeffery <andrew@aj.id.au> wrote:
>
> RCLK is a fixed 50MHz clock derived from HPLL/HCLK that is described by a
> single gate for each MAC.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

We could have mac12rclk and mac34rclk described in the device tree, as
was mentioned in previous reviews of the aspeed driver, but I think we
can defer that
rework until we rework the rest of the driver. Importantly, that won't
change the MAC bindings or the code that the drivers need to use.

Reviewed-by: Joel Stanley <joel@jms.id.au>


> ---
>  drivers/clk/clk-ast2600.c | 47 ++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 46 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
> index 1c1bb39bb04e..3d6fc781fee0 100644
> --- a/drivers/clk/clk-ast2600.c
> +++ b/drivers/clk/clk-ast2600.c
> @@ -15,7 +15,7 @@
>
>  #include "clk-aspeed.h"
>
> -#define ASPEED_G6_NUM_CLKS             67
> +#define ASPEED_G6_NUM_CLKS             71
>
>  #define ASPEED_G6_SILICON_REV          0x004
>
> @@ -40,6 +40,9 @@
>
>  #define ASPEED_G6_STRAP1               0x500
>
> +#define ASPEED_MAC12_CLK_DLY           0x340
> +#define ASPEED_MAC34_CLK_DLY           0x350
> +
>  /* Globally visible clocks */
>  static DEFINE_SPINLOCK(aspeed_g6_clk_lock);
>
> @@ -485,6 +488,11 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
>                 return PTR_ERR(hw);
>         aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw;
>
> +       /* MAC1/2 RMII 50MHz RCLK */
> +       hw = clk_hw_register_fixed_rate(dev, "mac12rclk", "hpll", 0, 50000000);
> +       if (IS_ERR(hw))
> +               return PTR_ERR(hw);
> +
>         /* MAC1/2 AHB bus clock divider */
>         hw = clk_hw_register_divider_table(dev, "mac12", "hpll", 0,
>                         scu_g6_base + ASPEED_G6_CLK_SELECTION1, 16, 3, 0,
> @@ -494,6 +502,27 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
>                 return PTR_ERR(hw);
>         aspeed_g6_clk_data->hws[ASPEED_CLK_MAC12] = hw;
>
> +       /* RMII1 50MHz (RCLK) output enable */
> +       hw = clk_hw_register_gate(dev, "mac1rclk-gate", "mac12rclk", 0,
> +                       scu_g6_base + ASPEED_MAC12_CLK_DLY, 29, 0,
> +                       &aspeed_g6_clk_lock);
> +       if (IS_ERR(hw))
> +               return PTR_ERR(hw);
> +       aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC1RCLK] = hw;
> +
> +       /* RMII2 50MHz (RCLK) output enable */
> +       hw = clk_hw_register_gate(dev, "mac2rclk-gate", "mac12rclk", 0,
> +                       scu_g6_base + ASPEED_MAC12_CLK_DLY, 30, 0,
> +                       &aspeed_g6_clk_lock);
> +       if (IS_ERR(hw))
> +               return PTR_ERR(hw);
> +       aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC2RCLK] = hw;
> +
> +       /* MAC1/2 RMII 50MHz RCLK */
> +       hw = clk_hw_register_fixed_rate(dev, "mac34rclk", "hclk", 0, 50000000);
> +       if (IS_ERR(hw))
> +               return PTR_ERR(hw);
> +
>         /* MAC3/4 AHB bus clock divider */
>         hw = clk_hw_register_divider_table(dev, "mac34", "hpll", 0,
>                         scu_g6_base + 0x310, 24, 3, 0,
> @@ -503,6 +532,22 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
>                 return PTR_ERR(hw);
>         aspeed_g6_clk_data->hws[ASPEED_CLK_MAC34] = hw;
>
> +       /* RMII3 50MHz (RCLK) output enable */
> +       hw = clk_hw_register_gate(dev, "mac3rclk-gate", "mac34rclk", 0,
> +                       scu_g6_base + ASPEED_MAC34_CLK_DLY, 29, 0,
> +                       &aspeed_g6_clk_lock);
> +       if (IS_ERR(hw))
> +               return PTR_ERR(hw);
> +       aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC3RCLK] = hw;
> +
> +       /* RMII4 50MHz (RCLK) output enable */
> +       hw = clk_hw_register_gate(dev, "mac4rclk-gate", "mac34rclk", 0,
> +                       scu_g6_base + ASPEED_MAC34_CLK_DLY, 30, 0,
> +                       &aspeed_g6_clk_lock);
> +       if (IS_ERR(hw))
> +               return PTR_ERR(hw);
> +       aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC4RCLK] = hw;
> +
>         /* LPC Host (LHCLK) clock divider */
>         hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0,
>                         scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
> --
> 2.20.1
>
diff mbox series

Patch

diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index 1c1bb39bb04e..3d6fc781fee0 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -15,7 +15,7 @@ 
 
 #include "clk-aspeed.h"
 
-#define ASPEED_G6_NUM_CLKS		67
+#define ASPEED_G6_NUM_CLKS		71
 
 #define ASPEED_G6_SILICON_REV		0x004
 
@@ -40,6 +40,9 @@ 
 
 #define ASPEED_G6_STRAP1		0x500
 
+#define ASPEED_MAC12_CLK_DLY		0x340
+#define ASPEED_MAC34_CLK_DLY		0x350
+
 /* Globally visible clocks */
 static DEFINE_SPINLOCK(aspeed_g6_clk_lock);
 
@@ -485,6 +488,11 @@  static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw;
 
+	/* MAC1/2 RMII 50MHz RCLK */
+	hw = clk_hw_register_fixed_rate(dev, "mac12rclk", "hpll", 0, 50000000);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
 	/* MAC1/2 AHB bus clock divider */
 	hw = clk_hw_register_divider_table(dev, "mac12", "hpll", 0,
 			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 16, 3, 0,
@@ -494,6 +502,27 @@  static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_MAC12] = hw;
 
+	/* RMII1 50MHz (RCLK) output enable */
+	hw = clk_hw_register_gate(dev, "mac1rclk-gate", "mac12rclk", 0,
+			scu_g6_base + ASPEED_MAC12_CLK_DLY, 29, 0,
+			&aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC1RCLK] = hw;
+
+	/* RMII2 50MHz (RCLK) output enable */
+	hw = clk_hw_register_gate(dev, "mac2rclk-gate", "mac12rclk", 0,
+			scu_g6_base + ASPEED_MAC12_CLK_DLY, 30, 0,
+			&aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC2RCLK] = hw;
+
+	/* MAC1/2 RMII 50MHz RCLK */
+	hw = clk_hw_register_fixed_rate(dev, "mac34rclk", "hclk", 0, 50000000);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
 	/* MAC3/4 AHB bus clock divider */
 	hw = clk_hw_register_divider_table(dev, "mac34", "hpll", 0,
 			scu_g6_base + 0x310, 24, 3, 0,
@@ -503,6 +532,22 @@  static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(hw);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_MAC34] = hw;
 
+	/* RMII3 50MHz (RCLK) output enable */
+	hw = clk_hw_register_gate(dev, "mac3rclk-gate", "mac34rclk", 0,
+			scu_g6_base + ASPEED_MAC34_CLK_DLY, 29, 0,
+			&aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC3RCLK] = hw;
+
+	/* RMII4 50MHz (RCLK) output enable */
+	hw = clk_hw_register_gate(dev, "mac4rclk-gate", "mac34rclk", 0,
+			scu_g6_base + ASPEED_MAC34_CLK_DLY, 30, 0,
+			&aspeed_g6_clk_lock);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_GATE_MAC4RCLK] = hw;
+
 	/* LPC Host (LHCLK) clock divider */
 	hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0,
 			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,