[OpenWrt-Devel,v4,3/3] ramips: add support for ZTK7628P development board
diff mbox series

Message ID 1570526671-4382-1-git-send-email-wurobinson@qq.com
State Superseded, archived
Headers show
Series
  • [OpenWrt-Devel,v4,1/3] ramips: add support for JS7628 development board
Related show

Commit Message

Robinson Wu Oct. 8, 2019, 9:24 a.m. UTC
This commit adds support for the ZhuoTK ZTK7628P development board,
The device has the following specifications:

- SOC:MT7628DAN
- RAM:64 MB (DDR2)
- FLASH:8/16/32 MB (SPI NOR)
- Ethernet:3x 10/100 Mbps ethernet ports (MT7628DAN built-in switch)
- WIFI:1x 2T2R 2.4 GHz Wi-Fi
- LEDs:1x system status green LED, 1x wifi green LED,
       3x ethernet green LED
- Buttons:1x reset button, 2x user defined button
- 1x microSD slot
- 4x USB 2.0 port
- 1x mini-usb debug UART
- 1x DC jack for main power (DC 5V)
- 1x TTL/RS232 UART
- 1x TTL/RS485 UART
- 13x GPIO header
- 1x audio codec(wm8960)

Installation via OpenWrt:

The original firmware is OpenWrt, so both LuCI or sysupgrade can be used.

Installation via U-boot web:

1. Power on board with reset button or key1 button pressed, release it
   after wifi led start blinking.
2. Setup static IP 192.168.1.123/4 on your PC.
3. Go to 192.168.1.8 in browser and upload "sysupgrade" image.

Installation via U-boot tftp:
1. Connect to serial console at the mini usb, which has been connected to UART0
   on board (115200 8N1)
2. Setup static IP 192.168.1.123/4 on your PC.
3. Place openwrt-firmware.bin on your PC tftp server (192.168.1.123).
3. Connect one of LAN ports on board to your PC.
4. Start terminal software (e.g. screen /dev/ttyUSB0 115200) on PC.
5. Apply power to board.
6. Interrupt U-boot with keypress of "2".
7. At u-boot prompts:
   Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N) Y
   Input device IP (192.168.1.8) ==:192.168.1.8
   Input server IP (192.168.1.123) ==:192.168.1.123
   Input Linux Kernel filename (root_uImage) ==:openwrt-firmware.bin
8. board will download file from tftp server, write it to flash and reboot.

Other notes:

1. This board is available with three types of RAM with flash
   configuration. Chose one of the right "Target Profile" in
   "make menuconfig" as listed below:

   "ZhuoTK ZTK7628P 8M flash"
   "ZhuoTK ZTK7628P 16M flash"
   "ZhuoTK ZTK7628P 32M flash"

   to fit the board you have.

Vist www.zhuotk.com for further information.

Signed-off-by: Robinson Wu <wurobinson@qq.com>
---
 target/linux/ramips/base-files/etc/board.d/01_leds |  5 +-
 .../linux/ramips/base-files/etc/board.d/02_network |  3 ++
 .../ramips/dts/mt7628an_zhuotk_ztk7628p-16m.dts    | 60 ++++++++++++++++++++++
 .../ramips/dts/mt7628an_zhuotk_ztk7628p-32m.dts    | 60 ++++++++++++++++++++++
 .../ramips/dts/mt7628an_zhuotk_ztk7628p-8m.dts     | 60 ++++++++++++++++++++++
 target/linux/ramips/image/mt76x8.mk                | 30 +++++++++++
 6 files changed, 217 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-16m.dts
 create mode 100644 target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-32m.dts
 create mode 100644 target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-8m.dts

Patch
diff mbox series

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index ef3c4fb..251de77 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -472,7 +472,10 @@  zhuotk,js7628-16m|\
 zhuotk,js7628-32m|\
 zhuotk,js7688-8m|\
 zhuotk,js7688-16m|\
-zhuotk,js7688-32m)
+zhuotk,js7688-32m|\
+zhuotk,ztk7628p-8m|\
+zhuotk,ztk7628p-16m|\
+zhuotk,ztk7628p-32m)
 	ucidef_set_led_timer "system" "system" "js76x8:green:system" "1000" "1000"
 	set_wifi_led "js76x8:green:wifi"
 	;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 22df3dc..700992e 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -108,6 +108,9 @@  ramips_setup_interfaces()
 	zhuotk,js7688-8m|\
 	zhuotk,js7688-16m|\
 	zhuotk,js7688-32m|\
+	zhuotk,ztk7628p-8m|\
+	zhuotk,ztk7628p-16m|\
+	zhuotk,ztk7628p-32m|\
 	zyxel,keenetic|\
 	zyxel,keenetic-omni)
 		ucidef_add_switch "switch0" \
diff --git a/target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-16m.dts b/target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-16m.dts
new file mode 100644
index 0000000..f84dda9
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-16m.dts
@@ -0,0 +1,60 @@ 
+/dts-v1/;
+
+#include "mt7628an_zhuotk_js76x8.dtsi"
+
+/ {
+	compatible = "zhuotk,ztk7628p-16m", "zhuotk,js76x8", "mediatek,mt7628an-soc";
+	model = "ZhuoTK ZTK7628P (16M flash)";
+};
+
+&spi0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		m25p,chunked-io = <32>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+
+	spidev@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "linux,spidev";
+		reg = <1>;
+		spi-max-frequency = <40000000>;
+	};
+};
diff --git a/target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-32m.dts b/target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-32m.dts
new file mode 100644
index 0000000..00f7865
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-32m.dts
@@ -0,0 +1,60 @@ 
+/dts-v1/;
+
+#include "mt7628an_zhuotk_js76x8.dtsi"
+
+/ {
+	compatible = "zhuotk,ztk7628p-32m", "zhuotk,js76x8", "mediatek,mt7628an-soc";
+	model = "ZhuoTK ZTK7628P (32M flash)";
+};
+
+&spi0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		m25p,chunked-io = <32>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x1fb0000>;
+			};
+		};
+	};
+
+	spidev@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "linux,spidev";
+		reg = <1>;
+		spi-max-frequency = <40000000>;
+	};
+};
diff --git a/target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-8m.dts b/target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-8m.dts
new file mode 100644
index 0000000..01c7e5d
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_zhuotk_ztk7628p-8m.dts
@@ -0,0 +1,60 @@ 
+/dts-v1/;
+
+#include "mt7628an_zhuotk_js76x8.dtsi"
+
+/ {
+	compatible = "zhuotk,ztk7628p-8m", "zhuotk,js76x8", "mediatek,mt7628an-soc";
+	model = "ZhuoTK ZTK7628P (8M flash)";
+};
+
+&spi0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		m25p,chunked-io = <32>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+
+	spidev@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "linux,spidev";
+		reg = <1>;
+		spi-max-frequency = <40000000>;
+	};
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index 7f6f851..984f766 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -643,6 +643,36 @@  define Device/zhuotk_js7688-32m
 endef
 TARGET_DEVICES += zhuotk_js7688-32m
 
+define Device/zhuotk_ztk7628p-8m
+  MTK_SOC := mt7628an
+  IMAGE_SIZE := 7872k
+  DEVICE_VENDOR := ZhuoTK
+  DEVICE_MODEL := ZTK7628P
+  DEVICE_VARIANT := 8M flash
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+endef
+TARGET_DEVICES += zhuotk_ztk7628p-8m
+
+define Device/zhuotk_ztk7628p-16m
+  MTK_SOC := mt7628an
+  IMAGE_SIZE := 16064k
+  DEVICE_VENDOR := ZhuoTK
+  DEVICE_MODEL := ZTK7628P
+  DEVICE_VARIANT := 16M flash
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+endef
+TARGET_DEVICES += zhuotk_ztk7628p-16m
+
+define Device/zhuotk_ztk7628p-32m
+  MTK_SOC := mt7628an
+  IMAGE_SIZE := 32448k
+  DEVICE_VENDOR := ZhuoTK
+  DEVICE_MODEL := ZTK7628P
+  DEVICE_VARIANT := 32M flash
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+endef
+TARGET_DEVICES += zhuotk_ztk7628p-32m
+
 define Device/zyxel_keenetic-extra-ii
   MTK_SOC := mt7628an
   IMAGE_SIZE := 14912k