diff --git a/Makefile b/Makefile
index 77140eb..7b56c09 100644
--- a/Makefile
+++ b/Makefile
@@ -608,6 +608,9 @@ ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 ## Coldfire
 #########################################################################
 
+amcore_config:
+	@$(MKCONFIG) -n $@ -a amcore m68k mcf530x amcore sysam
+
 astro_mcf5373l_config \
 astro_mcf5373l_RAM_config :	unconfig
 	@$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro
diff --git a/board/sysam/amcore/Makefile b/board/sysam/amcore/Makefile
new file mode 100644
index 0000000..c585b19
--- /dev/null
+++ b/board/sysam/amcore/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (c) 2011 Angelo Dureghello <sysamfw@gmail.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	= $(BOARD).o flash.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/sysam/amcore/amcore.c b/board/sysam/amcore/amcore.c
new file mode 100644
index 0000000..b7aa6a9
--- /dev/null
+++ b/board/sysam/amcore/amcore.c
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2011 Angelo Dureghello <sysamfw@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <asm/immap.h>
+
+/* 
+ * board can have a K0108 lcd connected on the parallel port,
+ * wired as below:
+ *
+ * fc cpu   P0  P1  P2  P3  P4  P5  P6  P7  P10 P11 P12 P13 P14
+ * lcd      D0  D1  D2  D3  D4  D5  D6  D7  CS1 CS2 RW  DI  E
+ *
+ * Starting up setting lines in high impedance
+ */    
+int init_lcd (void)
+{
+	/* all pins set to parallel port except PP8 and PP9 */
+	mbar_writeShort(MCFSIM_PAR, 0x300);
+	/* all outputs except P8 and P9 */	
+	mbar_writeShort(MCFSIM_PADDR, 0xfcff);
+	/* CSX and E all disabled, D(data), W(write) */
+	mbar_writeShort(MCFSIM_PADAT, 0x0c00);
+}
+
+int checkboard (void)
+{
+	puts ("Board: ");
+	puts ("AMCORE v.001(alpha)\n");
+
+	init_lcd();
+
+	return 0;
+}
+
+/* aprox delay, to use before any timer init */
+void fudelay (int usec)
+{
+	int i=0;
+
+	for (;i<10;++i) 
+	{
+		__asm__ __volatile__ ("nop");
+	}
+}
+
+phys_size_t initdram (int board_type) 
+{
+	icache_disable();
+
+	/*
+	SDRAM  MT48LC4M32B2 details
+
+	Memory block 0: 16 MB of SDRAM at address $00000000
+	Port size: 32-bit port
+
+	Memory block 0 wired as follows:
+	ColdFire Pin: A15 A14 A13 A12 A11 A10 A9 A17 A18 A19 A20      A21 A22 A23
+	SDRAM Pin:    A0  A1  A2  A3  A4  A5  A6 A7  A8  A9  A10(CMD) A11 BA0 BA1
+
+	Ensure that there is a delay of at least 100 microseconds from processor 
+	reset to the following code so that the SDRAM is ready for commands...
+
+	write to DACR0 base address:0x0000, CASL:03, command bit 20,
+	CBM is OK to 3 ***, 32 bit port, continuos page mode, rest to 0
+	*/
+
+	fudelay(1000);
+
+	/**
+	 * DCR
+	 * 0x26 mean Refresh period at 64msec (x4096 rows)
+	 * 0x8000,0x8100,0x8200 are all valid, faster is 0x8000 (7G, tRC is >=70ns)
+	 */
+	mbar_writeShort(MCFSIM_DCR, 0x8226);
+
+	/**
+	 * DACR0
+	 * page mode on burst only (to be verified) 0x00
+	 * CMD on A20 0x0300
+	 */
+	mbar_writeLong(MCFSIM_DACR0, 0x00003304);
+	mbar_writeLong(MCFSIM_DMR0, 0x00ff0001);
+
+	// issue a PRECHARGE ALL
+	mbar_writeLong(MCFSIM_DACR0, 0x0000330c);
+	*((volatile unsigned long  *)(0x00000004)) = 0xbeaddeed;
+	mbar_writeLong(MCFSIM_DACR0, 0x0000b304);
+
+	fudelay(1000);
+
+	*((volatile unsigned long  *)(0x00000004)) = 0xbeaddeed;
+	mbar_writeLong(MCFSIM_DACR0, 0x0000b304);
+
+	fudelay(1000);
+
+	mbar_writeLong(MCFSIM_DACR0, 0x0000b344);
+	*((volatile unsigned long  *)(0x00000c00)) = 0xbeaddeed;
+
+	// Memory block 1 not in use (DMR1[V] = 0)
+	mbar_writeLong(MCFSIM_DMR1, 0x00040000);
+	mbar_writeLong(MCFSIM_DACR1, 0x00000000);
+
+	icache_enable();
+
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+}
+
+int testdram (void)
+{
+	int i=0,x,rval=0;
+
+	icache_disable();
+
+	const unsigned long a=0xaaaaaaaa;
+	const unsigned long b=0x55555555;
+	const unsigned long c=0xffffffff;
+	volatile unsigned long *p = (volatile unsigned long *)0;
+	volatile unsigned long *q;
+
+	puts ("SRAM test:\n");
+
+	for (;i<16;++i)
+	{
+		printf ("testing MB %02d ...\n", i+1);
+
+		q=p=(volatile unsigned long*)(1024*1024*i);
+
+		for (x=0;x<65536;++x) {
+			*p++=0;
+			*p++=a;
+			*p++=b;
+			*p++=c;
+		}
+		for (x=0;x<65536;++x) {
+			if (*q++!=0) goto error;
+			if (*q++!=a) goto error;
+			if (*q++!=b) goto error;
+			if (*q++!=c) goto error;
+		}
+	}
+	puts ("test passed !\n");
+	goto exit;
+
+error:
+	puts ("test failed !\n");
+	rval=1;
+
+exit:
+	icache_enable();
+
+	return (rval);
+}
diff --git a/board/sysam/amcore/config.mk b/board/sysam/amcore/config.mk
new file mode 100644
index 0000000..cb45c2c
--- /dev/null
+++ b/board/sysam/amcore/config.mk
@@ -0,0 +1,23 @@
+#
+# Copyright (c) 2011 Angelo Dureghello <sysamfw@gmail.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_SYS_TEXT_BASE = 0xffc00000
diff --git a/board/sysam/amcore/flash.c b/board/sysam/amcore/flash.c
new file mode 100644
index 0000000..d2390f1
--- /dev/null
+++ b/board/sysam/amcore/flash.c
@@ -0,0 +1,462 @@
+/*
+ * Copyright (c) 2011 Angelo Dureghello <sysamfw@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <asm/immap.h>
+
+#ifndef CONFIG_SYS_FLASH_CFI
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+
+#define FPW             FLASH_PORT_WIDTH
+#define FPWV            FLASH_PORT_WIDTHV
+
+#define FLASH_CYCLE1    0x5555
+#define FLASH_CYCLE2    0x2aaa
+
+#define SYNC		__asm__("nop")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+ulong flash_get_size(FPWV * addr, flash_info_t * info);
+int flash_get_offsets(ulong base, flash_info_t * info);
+int write_word(flash_info_t * info, FPWV * dest, u16 data);
+void inline spin_wheel(void);
+
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+unsigned short swap (unsigned short value)
+{
+	return ((value << 8) | (value >> 8));
+}
+
+ulong flash_init(void)
+{
+	ulong size = 0;
+	ulong fbase = 0;
+
+	fbase = (ulong) CONFIG_SYS_FLASH_BASE;
+	flash_get_size((FPWV *) fbase, &flash_info[0]);
+	flash_get_offsets((ulong) fbase, &flash_info[0]);
+	fbase += flash_info[0].size;
+	size += flash_info[0].size;
+
+	return size;
+}
+
+int flash_get_offsets(ulong base, flash_info_t * info)
+{
+	int j, k;
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+
+		info->start[0] = base;
+		for (k = 0, j = 0; j < CONFIG_SYS_SST_SECT; j++, k++) {
+			info->start[k + 1] = info->start[k] + CONFIG_SYS_SST_SECTSZ;
+			info->protect[k] = 0;
+		}
+	}
+
+	return ERR_OK;
+}
+
+void flash_print_info(flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_SST:
+		printf("SST ");
+		break;
+	default:
+		printf("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_SST3201B:
+		printf("SST39VF3201B\n");
+		break;
+	default:
+		printf("Unknown Chip Type\n");
+		return;
+	}
+
+	if (info->size > 0x100000) {
+		int remainder;
+
+		printf("  Size: %ld", info->size >> 20);
+
+		remainder = (info->size % 0x100000);
+		if (remainder) {
+			remainder >>= 10;
+			remainder = (int)((float)
+					  (((float)remainder / (float)1024) *
+					   10000));
+			printf(".%d ", remainder);
+		}
+
+		printf("MB in %d Sectors\n", info->sector_count);
+	} else
+		printf("  Size: %ld KB in %d Sectors\n",
+		       info->size >> 10, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s",
+		       info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf("\n");
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ulong flash_get_size(FPWV * addr, flash_info_t * info)
+{
+	u16 vend, flid;
+
+	/* amcore board has bus bytes swapped */
+
+	addr[FLASH_CYCLE1] = (FPWV) 0xAA00AA00;	/* for Atmel, Intel ignores this */
+	addr[FLASH_CYCLE2] = (FPWV) 0x55005500;	/* for Atmel, Intel ignores this */
+	addr[FLASH_CYCLE1] = (FPWV) 0x90009000;	/* selects Manufacture */
+
+	vend=swap(addr[0]);
+
+	//printf ("vendor = %08X\n", vend);
+
+	switch (vend) {
+	case (u8) SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		flid = swap(addr[1]);
+		break;
+	default:
+		printf("Unknown Flash\n");
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+
+		*addr = (FPW) 0xF000F000;
+		return (0);	/* no or unknown flash  */
+	}
+
+	//printf ("flash id = %08X\n", flid);
+
+	switch (flid) {
+	case (u16) SST_ID_xF3201B:
+		info->flash_id += FLASH_SST3201B;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	info->sector_count = 0;
+	info->size = 0;
+	info->sector_count = CONFIG_SYS_SST_SECT;
+	info->size = CONFIG_SYS_SST_SECT * CONFIG_SYS_SST_SECTSZ;
+
+	/* reset ID mode */
+	*addr = (FPWV) 0xF000F000;
+
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
+		printf("** ERROR: sector count %d > max (%d) **\n",
+		       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+	}
+
+	return (info->size);
+}
+
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	FPWV *addr;
+	int flag, prot, sect, count;
+	ulong type, start, last;
+	int rcode = 0, flashtype = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN)
+			printf("- missing\n");
+		else
+			printf("- no sectors to erase\n");
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+
+	switch (type) {
+	case FLASH_MAN_SST:
+		flashtype = 1;
+		break;
+	default:
+		type = (info->flash_id & FLASH_VENDMASK);
+		printf("Can't erase unknown flash type %08lx - aborted\n",
+		       info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot)
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	else
+		printf("\n");
+
+	flag = disable_interrupts();
+
+	start = get_timer(0);
+	last = start;
+
+	if ((s_last - s_first) == (CONFIG_SYS_SST_SECT - 1)) {
+		if (prot == 0) {
+			addr = (FPWV *) info->start[0];
+
+			addr[FLASH_CYCLE1] = 0xAA00;	/* unlock */
+			addr[FLASH_CYCLE2] = 0x5500;	/* unlock */
+			addr[FLASH_CYCLE1] = 0x8000;	/* erase mode */
+			addr[FLASH_CYCLE1] = 0xAA00;	/* unlock */
+			addr[FLASH_CYCLE2] = 0x5500;	/* unlock */
+			*addr = 0x3000;	/* erase chip */
+
+			count = 0;
+			start = get_timer(0);
+
+			while ((*addr & 0x8000) != 0x8000) {
+				if (count++ > 0x10000) {
+					spin_wheel();
+					count = 0;
+				}
+
+				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+					printf("Timeout\n");
+					*addr = 0xF000;	/* reset to read mode */
+
+					return 1;
+				}
+			}
+
+			*addr = 0xF000;	/* reset to read mode */
+
+			printf("\b. done\n");
+
+			if (flag)
+				enable_interrupts();
+
+			return 0;
+		} else if (prot == CONFIG_SYS_SST_SECT) {
+			return 1;
+		}
+	}
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+
+			addr = (FPWV *) (info->start[sect]);
+
+			printf(".");
+
+			/* arm simple, non interrupt dependent timer */
+			start = get_timer(0);
+
+			switch (flashtype) {
+			case 1:
+				{
+					FPWV *base;	/* first address in bank */
+
+					flag = disable_interrupts();
+
+					base = (FPWV *) (CONFIG_SYS_FLASH_BASE);	/* First sector */
+
+					base[FLASH_CYCLE1] = 0xAA00;	/* unlock */
+					base[FLASH_CYCLE2] = 0x5500;	/* unlock */
+					base[FLASH_CYCLE1] = 0x8000;	/* erase mode */
+					base[FLASH_CYCLE1] = 0xAA00;	/* unlock */
+					base[FLASH_CYCLE2] = 0x5500;	/* unlock */
+					*addr = 0x5000;	/* erase sector */
+
+					if (flag)
+						enable_interrupts();
+
+					while ((*addr & 0x8000) != 0x8000) {
+						if (get_timer(start) >
+						    CONFIG_SYS_FLASH_ERASE_TOUT) {
+							printf("Timeout\n");
+							*addr = 0xF000;	/* reset to read mode */
+
+							rcode = 1;
+							break;
+						}
+					}
+
+					*addr = 0xF000;	/* reset to read mode */
+					break;
+				}
+			}	/* switch (flashtype) */
+		}
+	}
+	printf(" done\n");
+
+	if (flag)
+		enable_interrupts();
+
+	return rcode;
+}
+
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong wp, count;
+	u16 data;
+	int rc, port_width;
+
+	if (info->flash_id == FLASH_UNKNOWN)
+		return 4;
+
+	/* get lower word aligned address */
+	wp = addr;
+	port_width = sizeof(FPW);
+
+	/* handle unaligned start bytes */
+	if (wp & 1) {
+		data = *((FPWV *) wp);
+		data = (data << 8) | *src;
+
+		if ((rc = write_word(info, (FPWV *) wp, data)) != 0)
+			return (rc);
+
+		wp++;
+		cnt -= 1;
+		src++;
+	}
+
+	while (cnt >= 2) {
+		/*
+		 * writing words here
+		 */
+		count = 0;
+		data = *((FPWV *) src);
+
+		if ((rc = write_word(info, (FPWV *) wp, data)) != 0)
+			return (rc);
+
+		wp += 2;
+		src += 2;
+		cnt -= 2;
+
+		if (count++ > 0x800) {
+			spin_wheel();
+			count = 0;
+		}
+	}
+	/* handle last byte, if exist */
+	if (cnt) {
+		count = 0;
+		data = *((FPWV *) wp);
+
+		data = (data & 0x00ff) | (*src << 8);
+
+		if ((rc = write_word(info, (FPWV *) wp, data)) != 0)
+			return (rc);
+		cnt--;
+	}
+
+	if (cnt == 0)
+		return ERR_OK;
+
+	return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash
+ * Function ready for 16 bit PS flash chips
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_word(flash_info_t * info, FPWV * dest, u16 data)
+{
+	ulong start;
+	int flag;
+	int res = 0;		/* result, assume success */
+	FPWV *base;		/* first address in flash bank */
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*dest & data) != data) {
+		return (2);
+	}
+
+	base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	base[FLASH_CYCLE1] = 0xAA00;	/* unlock */
+	base[FLASH_CYCLE2] = 0x5500;	/* unlock */
+	base[FLASH_CYCLE1] = 0xA000;	/* selects program mode */
+
+	*dest = data;		/* start programming the data */
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	start = get_timer(0);
+
+	/* data polling for D7 */
+	while (res == 0
+	       && (*dest & 0x8000) != (data & 0x8000)) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+			*dest = 0xF000;	/* reset bank */
+			res = 1;
+		}
+	}
+
+	*dest++ = 0xF000;	/* reset bank */
+
+	return (res);
+}
+
+void inline spin_wheel(void)
+{
+	static int p = 0;
+	static char w[] = "\\/-";
+
+	printf("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
+}
+
+#endif
diff --git a/board/sysam/amcore/u-boot.lds b/board/sysam/amcore/u-boot.lds
new file mode 100644
index 0000000..0274e35
--- /dev/null
+++ b/board/sysam/amcore/u-boot.lds
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2011 Angelo Dureghello <sysamfw@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  .text      :
+  {
+    arch/m68k/cpu/mcf530x/start.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/env_embedded.o	(.text)
+
+    *(.text)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    KEEP(*(.got))
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    KEEP(*(.got2))
+    _FIXUP_TABLE_ = .;
+    KEEP(*(.fixup))
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.sdata)
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   _sbss = .;
+   *(.sbss*)
+   *(.bss*)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  __bss_end__ = . ;
+  PROVIDE (end = .);
+}
diff --git a/boards.cfg b/boards.cfg
index e5cb91b..868bcad 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -264,6 +264,7 @@ idmr                         m68k        mcf52x2
 TASREG                       m68k        mcf52x2     tasreg              esd
 M5208EVBE                    m68k        mcf52x2     m5208evbe           freescale
 M5249EVB                     m68k        mcf52x2     m5249evb            freescale
+AMCORE                       m68k        mcf5307     amcore              sysam
 M5253DEMO                    m68k        mcf52x2     m5253demo           freescale
 M5253EVBE                    m68k        mcf52x2     m5253evbe           freescale
 M5271EVB                     m68k        mcf52x2     m5271evb            freescale
diff --git a/include/configs/amcore.h b/include/configs/amcore.h
new file mode 100644
index 0000000..c6b49e8
--- /dev/null
+++ b/include/configs/amcore.h
@@ -0,0 +1,193 @@
+/*
+ * Configuation settings for the Sysam AMCORE board.
+ *
+ * Copyright (c) 2011 Angelo Dureghello <sysamfw@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _AMCORE_H
+#define _AMCORE_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF530x			/* define processor family */
+#define CONFIG_M5307			/* define processor type */
+
+#define CONFIG_MCFTMR
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT		(0)
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_BOOTDELAY   1  /* autoboot after 5 seconds   */
+#define CONFIG_BOOTCOMMAND "bootm ffc20000" /* autoboot command   */
+
+
+
+#undef  CONFIG_WATCHDOG
+#undef  CONFIG_MONITOR_IS_IN_RAM
+
+/*
+ * BOOTP options
+ */
+#undef CONFIG_BOOTP_BOOTFILESIZE
+#undef CONFIG_BOOTP_BOOTPATH
+#undef CONFIG_BOOTP_GATEWAY
+#undef CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_CACHE
+
+#define CONFIG_SYS_PROMPT		"amcore$ "
+//#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#else
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup	*/
+#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support	*/
+#define CONFIG_LOOPW		1	/* enable loopw command	*/
+#define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands	*/
+
+#define CONFIG_SYS_LOAD_ADDR		0x20000	/* default load address */
+
+#undef  CONFIG_SYS_DRAM_TEST
+#define CONFIG_SYS_MEMTEST_START	0x0
+#define CONFIG_SYS_MEMTEST_END		0x100000
+
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Clock configuration: enable only one of the following options
+ */
+
+#undef  CONFIG_SYS_PLL_BYPASS				/* bypass PLL for test purpose */
+#define	CONFIG_SYS_CLK			90000000	/* MCF5307 run at 90MHz   */
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
+
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000	/* Size of used area in internal SRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET	0x600	/* Address of Environment Sector*/
+#define CONFIG_ENV_SIZE		0x0400	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x0400  /* see README - env sector total size	*/
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		0xffc00000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
+
+#define FLASH_SST3201B			0x300
+
+#define CONFIG_SYS_SST_SECT		1024
+#define CONFIG_SYS_SST_SECTSZ		0x1000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
+
+#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
+
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(1 * 1024*1024)	/* Reserve 1 MB for malloc()	*/
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_CACHELINE_SIZE	16
+
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 4)
+#define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_FLASH_BASE | \
+					 CF_ADDRMASK(2) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+
+/* no ACR1 initialization for SDRAM before SDRAM init */
+
+#define CONFIG_SYS_CACHE_ICACR		 (CF_CACR_EC | CF_CACR_CINVA | \
+					 CF_CACR_DCM_P)
+
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+
+/* CS0 - AMD Flash, address 0xffc00000 */
+#define	CONFIG_SYS_CS0_BASE		(CONFIG_SYS_FLASH_BASE)
+#define	CONFIG_SYS_CS0_CTRL		0x00001980	/* WS=10, AA=1, PS=16bit (10) */
+#define	CONFIG_SYS_CS0_MASK		0x003f0001	/* 4MB, AA=0,V=1  C/I BIT !!!!! */
+
+/* CS1 - DM9000 Ethernet Controller, address 0x30000000 */
+#define CONFIG_SYS_CS1_BASE		0x30000000
+#define CONFIG_SYS_CS1_CTRL		0x00000100 
+#define CONFIG_SYS_CS1_MASK		0x00070001
+
+#endif  //_AMCORE_H
diff --git a/include/flash.h b/include/flash.h
index 0ca70d9..29db8f4 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -281,6 +281,7 @@ extern flash_info_t *flash_get_info(ulong base);
 #define SST_ID_xF1601	0x234B234B	/* 39xF1601 ID (16M =	1M x 16 )	*/
 #define SST_ID_xF1602	0x234A234A	/* 39xF1602 ID (16M =	1M x 16 )	*/
 #define SST_ID_xF3201	0x235B235B	/* 39xF3201 ID (32M =	2M x 16 )	*/
+#define SST_ID_xF3201B	0x235D235D	/* 39xF320B1 ID (32M =	 2M x 16 )	*/
 #define SST_ID_xF3202	0x235A235A	/* 39xF3202 ID (32M =	2M x 16 )	*/
 #define SST_ID_xF6401	0x236B236B	/* 39xF6401 ID (64M =	4M x 16 )	*/
 #define SST_ID_xF6402	0x236A236A	/* 39xF6402 ID (64M =	4M x 16 )	*/
