[v2,2/6] pwm: mxs: remove legacy methods
diff mbox series

Message ID 20191004133207.6663-3-linux@rasmusvillemoes.dk
State New
Headers show
Series
  • pwm: mxs: add support for setting polarity via DT
Related show

Commit Message

Rasmus Villemoes Oct. 4, 2019, 1:32 p.m. UTC
Since we now have ->apply, these are no longer relevant.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/pwm/pwm-mxs.c | 77 -------------------------------------------
 1 file changed, 77 deletions(-)

Comments

Uwe Kleine-König Oct. 4, 2019, 2:19 p.m. UTC | #1
On Fri, Oct 04, 2019 at 03:32:03PM +0200, Rasmus Villemoes wrote:
> Since we now have ->apply, these are no longer relevant.
> 
> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>

nice and easy,

Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Best regards
Uwe

Patch
diff mbox series

diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
index 10efd3de0bb3..5a6835e18fc6 100644
--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -110,85 +110,8 @@  static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
-static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			  int duty_ns, int period_ns)
-{
-	struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
-	int ret, div = 0;
-	unsigned int period_cycles, duty_cycles;
-	unsigned long rate;
-	unsigned long long c;
-
-	rate = clk_get_rate(mxs->clk);
-	while (1) {
-		c = rate / cdiv[div];
-		c = c * period_ns;
-		do_div(c, 1000000000);
-		if (c < PERIOD_PERIOD_MAX)
-			break;
-		div++;
-		if (div >= PERIOD_CDIV_MAX)
-			return -EINVAL;
-	}
-
-	period_cycles = c;
-	c *= duty_ns;
-	do_div(c, period_ns);
-	duty_cycles = c;
-
-	/*
-	 * If the PWM channel is disabled, make sure to turn on the clock
-	 * before writing the register. Otherwise, keep it enabled.
-	 */
-	if (!pwm_is_enabled(pwm)) {
-		ret = clk_prepare_enable(mxs->clk);
-		if (ret)
-			return ret;
-	}
-
-	writel(duty_cycles << 16,
-			mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20);
-	writel(PERIOD_PERIOD(period_cycles) | PERIOD_ACTIVE_HIGH |
-	       PERIOD_INACTIVE_LOW | PERIOD_CDIV(div),
-			mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
-
-	/*
-	 * If the PWM is not enabled, turn the clock off again to save power.
-	 */
-	if (!pwm_is_enabled(pwm))
-		clk_disable_unprepare(mxs->clk);
-
-	return 0;
-}
-
-static int mxs_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
-	int ret;
-
-	ret = clk_prepare_enable(mxs->clk);
-	if (ret)
-		return ret;
-
-	writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
-
-	return 0;
-}
-
-static void mxs_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
-
-	writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
-
-	clk_disable_unprepare(mxs->clk);
-}
-
 static const struct pwm_ops mxs_pwm_ops = {
 	.apply = mxs_pwm_apply,
-	.config = mxs_pwm_config,
-	.enable = mxs_pwm_enable,
-	.disable = mxs_pwm_disable,
 	.owner = THIS_MODULE,
 };