diff mbox series

[V1] dt-bindings: pinctrl: qcom-pmic-gpio: Add support for pm6150/pm6150l

Message ID 1570188039-22122-1-git-send-email-kgunda@codeaurora.org
State New
Headers show
Series [V1] dt-bindings: pinctrl: qcom-pmic-gpio: Add support for pm6150/pm6150l | expand

Commit Message

Kiran Gunda Oct. 4, 2019, 11:20 a.m. UTC
Add support for the PM6150 and PM6150L GPIO support to the
Qualcomm PMIC GPIO binding.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 2 ++
 2 files changed, 6 insertions(+)

Comments

Bjorn Andersson Oct. 5, 2019, 4:38 a.m. UTC | #1
On Fri 04 Oct 04:20 PDT 2019, Kiran Gunda wrote:

> Add support for the PM6150 and PM6150L GPIO support to the
> Qualcomm PMIC GPIO binding.
> 
> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++
>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 2 ++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> index c32bf32..2f48cca 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> @@ -23,6 +23,8 @@ PMIC's from Qualcomm.
>  		    "qcom,pms405-gpio"
>  		    "qcom,pm8150-gpio"
>  		    "qcom,pm8150b-gpio"
> +		    "qcom,pm6150-gpio"
> +		    "qcom,pm6150l-gpio"
>  
>  		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
>  		    if the device is on an spmi bus or an ssbi bus respectively
> @@ -100,6 +102,8 @@ to specify in a pin configuration subnode:
>  					     and gpio8)
>  		    gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
>  		    gpio1-gpio12 for pm8150l (hole on gpio7)
> +		    gpio1-gpio10 for pm6150
> +		    gpio1-gpio12 for pm6150l
>  
>  - function:
>  	Usage: required
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index f1fece5..387917c 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -1121,6 +1121,8 @@ static int pmic_gpio_remove(struct platform_device *pdev)
>  	{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
>  	/* pm8150l has 12 GPIOs with holes on 7 */
>  	{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
> +	{ .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
> +	{ .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
>  	{ },
>  };
>  
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>  a Linux Foundation Collaborative Project
>
Linus Walleij Oct. 9, 2019, 9:19 a.m. UTC | #2
On Fri, Oct 4, 2019 at 1:20 PM Kiran Gunda <kgunda@codeaurora.org> wrote:

> Add support for the PM6150 and PM6150L GPIO support to the
> Qualcomm PMIC GPIO binding.
>
> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>

Patch applied.

Yours,
Linus Walleij
Vinod Koul Oct. 16, 2019, 8:15 a.m. UTC | #3
On 04-10-19, 16:50, Kiran Gunda wrote:
> Add support for the PM6150 and PM6150L GPIO support to the
> Qualcomm PMIC GPIO binding.
> 
> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++
>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 2 ++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> index c32bf32..2f48cca 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> @@ -23,6 +23,8 @@ PMIC's from Qualcomm.
>  		    "qcom,pms405-gpio"
>  		    "qcom,pm8150-gpio"
>  		    "qcom,pm8150b-gpio"
> +		    "qcom,pm6150-gpio"
> +		    "qcom,pm6150l-gpio"
>  
>  		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
>  		    if the device is on an spmi bus or an ssbi bus respectively
> @@ -100,6 +102,8 @@ to specify in a pin configuration subnode:
>  					     and gpio8)
>  		    gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
>  		    gpio1-gpio12 for pm8150l (hole on gpio7)
> +		    gpio1-gpio10 for pm6150
> +		    gpio1-gpio12 for pm6150l

No holes on these?

Other than this:

Reviewed-by: Vinod Koul <vkoul@kernel.org>

>  
>  - function:
>  	Usage: required
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index f1fece5..387917c 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -1121,6 +1121,8 @@ static int pmic_gpio_remove(struct platform_device *pdev)
>  	{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
>  	/* pm8150l has 12 GPIOs with holes on 7 */
>  	{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
> +	{ .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
> +	{ .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
>  	{ },
>  };
>  
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>  a Linux Foundation Collaborative Project
Kiran Gunda Oct. 16, 2019, 8:48 a.m. UTC | #4
On 2019-10-16 13:45, Vinod Koul wrote:
> On 04-10-19, 16:50, Kiran Gunda wrote:
>> Add support for the PM6150 and PM6150L GPIO support to the
>> Qualcomm PMIC GPIO binding.
>> 
>> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
>> ---
>>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++
>>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 2 ++
>>  2 files changed, 6 insertions(+)
>> 
>> diff --git 
>> a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt 
>> b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
>> index c32bf32..2f48cca 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
>> @@ -23,6 +23,8 @@ PMIC's from Qualcomm.
>>  		    "qcom,pms405-gpio"
>>  		    "qcom,pm8150-gpio"
>>  		    "qcom,pm8150b-gpio"
>> +		    "qcom,pm6150-gpio"
>> +		    "qcom,pm6150l-gpio"
>> 
>>  		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
>>  		    if the device is on an spmi bus or an ssbi bus respectively
>> @@ -100,6 +102,8 @@ to specify in a pin configuration subnode:
>>  					     and gpio8)
>>  		    gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
>>  		    gpio1-gpio12 for pm8150l (hole on gpio7)
>> +		    gpio1-gpio10 for pm6150
>> +		    gpio1-gpio12 for pm6150l
> 
> No holes on these?
> 
Yes. No holes.
> Other than this:
> 
> Reviewed-by: Vinod Koul <vkoul@kernel.org>
> 
>> 
>>  - function:
>>  	Usage: required
>> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c 
>> b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
>> index f1fece5..387917c 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
>> @@ -1121,6 +1121,8 @@ static int pmic_gpio_remove(struct 
>> platform_device *pdev)
>>  	{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
>>  	/* pm8150l has 12 GPIOs with holes on 7 */
>>  	{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
>> +	{ .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
>> +	{ .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
>>  	{ },
>>  };
>> 
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>>  a Linux Foundation Collaborative Project
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index c32bf32..2f48cca 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -23,6 +23,8 @@  PMIC's from Qualcomm.
 		    "qcom,pms405-gpio"
 		    "qcom,pm8150-gpio"
 		    "qcom,pm8150b-gpio"
+		    "qcom,pm6150-gpio"
+		    "qcom,pm6150l-gpio"
 
 		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
 		    if the device is on an spmi bus or an ssbi bus respectively
@@ -100,6 +102,8 @@  to specify in a pin configuration subnode:
 					     and gpio8)
 		    gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
 		    gpio1-gpio12 for pm8150l (hole on gpio7)
+		    gpio1-gpio10 for pm6150
+		    gpio1-gpio12 for pm6150l
 
 - function:
 	Usage: required
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index f1fece5..387917c 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1121,6 +1121,8 @@  static int pmic_gpio_remove(struct platform_device *pdev)
 	{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
 	/* pm8150l has 12 GPIOs with holes on 7 */
 	{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
+	{ .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
+	{ .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
 	{ },
 };