[v2,7/7] dt-bindings: iio: adc: max1027: Document max12xx series compatibles

Update the bindings documentation with new Maxim ADCs compatibles.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 .../devicetree/bindings/iio/adc/max1027-adc.txt        | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

On Thu,  3 Oct 2019 19:34:01 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Update the bindings documentation with new Maxim ADCs compatibles.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Both DT patches look fine to me... 

If you happened to fancy doing the yaml conversion it would be
appreciated... :) 

If not we'll get to this one one day.

Anyhow, a few trivial bits in the earlier patches so v3 should be
good to go.

Thanks,

Jonathan

> ---
>  .../devicetree/bindings/iio/adc/max1027-adc.txt        | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
> index 7b23d68f655c..1b703a01d882 100644
> --- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt
> @@ -1,7 +1,13 @@
> -* Maxim 1027/1029/1031 Analog to Digital Converter (ADC)
> +* Maxim 1027/1029/1031/1227/1229/1231 Analog to Digital Converter (ADC)
>  
>  Required properties:
> -  - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
> +  - compatible: Should be one of:
> +    * "maxim,max1027"
> +    * "maxim,max1029"
> +    * "maxim,max1031"
> +    * "maxim,max1227"
> +    * "maxim,max1229"
> +    * "maxim,max1231"
>    - reg: SPI chip select number for the device
>  
>  Optional properties:

Hi Jonathan,

Jonathan Cameron <jic23@kernel.org> wrote on Sun, 6 Oct 2019 11:27:51
+0100:

> On Thu,  3 Oct 2019 19:34:01 +0200
> Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> 
> > Update the bindings documentation with new Maxim ADCs compatibles.
> > 
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>  
> 
> Both DT patches look fine to me... 
> 
> If you happened to fancy doing the yaml conversion it would be
> appreciated... :) 

I'm being requested all the time, that would be my third yaml
conversion, so let's go for it (if it's not overly complicated, I'll
check first...) :)

> If not we'll get to this one one day.
> 
> Anyhow, a few trivial bits in the earlier patches so v3 should be
> good to go.
> 
> Thanks,
> 
> Jonathan
> 

Thanks,
Miquèl