pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts

As platform_get_irq() now prints an error when the interrupt does not
exist, counting interrupts by looping until failure causes the printing
of scary messages like:

    sh-pfc e6060000.pin-controller: IRQ index 0 not found

Fix this by using the platform_irq_count() helper instead.

Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This is a fix for v5.4-rc1.
---
 drivers/pinctrl/sh-pfc/core.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

Hi Geert-san,

> From: Geert Uytterhoeven, Sent: Wednesday, October 2, 2019 3:06 AM
> 
> As platform_get_irq() now prints an error when the interrupt does not
> exist, counting interrupts by looping until failure causes the printing
> of scary messages like:
> 
>     sh-pfc e6060000.pin-controller: IRQ index 0 not found
> 
> Fix this by using the platform_irq_count() helper instead.
> 
> Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> This is a fix for v5.4-rc1.

Thank you for the patch!

Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

And, I tested this patch on R-Car H3. So,

Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Best regards,
Yoshihiro Shimoda

Quoting Geert Uytterhoeven (2019-10-01 11:05:47)
> As platform_get_irq() now prints an error when the interrupt does not
> exist, counting interrupts by looping until failure causes the printing
> of scary messages like:
> 
>     sh-pfc e6060000.pin-controller: IRQ index 0 not found
> 
> Fix this by using the platform_irq_count() helper instead.
> 
> Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Hi Geert,

Thanks for your work.

On 2019-10-01 20:05:47 +0200, Geert Uytterhoeven wrote:
> As platform_get_irq() now prints an error when the interrupt does not
> exist, counting interrupts by looping until failure causes the printing
> of scary messages like:
> 
>     sh-pfc e6060000.pin-controller: IRQ index 0 not found
> 
> Fix this by using the platform_irq_count() helper instead.
> 
> Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Nice change.

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
> This is a fix for v5.4-rc1.
> ---
>  drivers/pinctrl/sh-pfc/core.c | 16 ++++++----------
>  1 file changed, 6 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
> index b8640ad41bef26be..ce983247c9e28bfe 100644
> --- a/drivers/pinctrl/sh-pfc/core.c
> +++ b/drivers/pinctrl/sh-pfc/core.c
> @@ -29,12 +29,12 @@
>  static int sh_pfc_map_resources(struct sh_pfc *pfc,
>  				struct platform_device *pdev)
>  {
> -	unsigned int num_windows, num_irqs;
>  	struct sh_pfc_window *windows;
>  	unsigned int *irqs = NULL;
> +	unsigned int num_windows;
>  	struct resource *res;
>  	unsigned int i;
> -	int irq;
> +	int num_irqs;
>  
>  	/* Count the MEM and IRQ resources. */
>  	for (num_windows = 0;; num_windows++) {
> @@ -42,17 +42,13 @@ static int sh_pfc_map_resources(struct sh_pfc *pfc,
>  		if (!res)
>  			break;
>  	}
> -	for (num_irqs = 0;; num_irqs++) {
> -		irq = platform_get_irq(pdev, num_irqs);
> -		if (irq == -EPROBE_DEFER)
> -			return irq;
> -		if (irq < 0)
> -			break;
> -	}
> -
>  	if (num_windows == 0)
>  		return -EINVAL;
>  
> +	num_irqs = platform_irq_count(pdev);
> +	if (num_irqs < 0)
> +		return num_irqs;
> +
>  	/* Allocate memory windows and IRQs arrays. */
>  	windows = devm_kcalloc(pfc->dev, num_windows, sizeof(*windows),
>  			       GFP_KERNEL);
> -- 
> 2.17.1
>