| Message ID | 20190925141229.10992-2-jonathanh@nvidia.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [1/2] arm64: tegra: Fix 'active-low' warning for Jetson Xavier regulator | expand |
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index a7dc319214a4..b0095072bc28 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1612,7 +1612,7 @@ regulator-name = "VDD_HDMI_5V0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&exp1 12 GPIO_ACTIVE_LOW>; + gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; };
Commit 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1") added a regulator for HDMI on the Jetson TX1 platform. This regulator has an active high enable, but the GPIO specifier for enabling the regulator incorrectly defines it as active-low. This causes the following warning to occur on boot ... WARNING KERN regulator@10 GPIO handle specifies active low - ignored The fixed-regulator binding does not use the active-low flag from the gpio specifier and purely relies of the presence of the 'enable-active-high' property to determine if it is active high or low (if this property is omitted). Fix this warning by setting the GPIO to active-high in the GPIO specifier which aligns with the presense of the 'enable-active-high' property. Fixes: 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)