[v2] mtd: rawnand: Change calculating of position page containing BBM
diff mbox series

Message ID 20190924055439.4212-1-piotrs@cadence.com
State Accepted
Headers show
Series
  • [v2] mtd: rawnand: Change calculating of position page containing BBM
Related show

Commit Message

Piotr Sroka Sept. 24, 2019, 5:54 a.m. UTC
Change calculating of position page containing BBM

If none of BBM flags are set then function nand_bbm_get_next_page 
reports EINVAL. It causes that BBM is not read at all during scanning
factory bad blocks. The result is that the BBT table is build without 
checking factory BBM at all. For Micron flash memories none of these 
flags are set if page size is different than 2048 bytes.

Address this regression by:
- adding NAND_BBM_FIRSTPAGE chip flag without any condition. It solves
  issue only for Micron devices.
- changing the nand_bbm_get_next_page_function. It will return 0 
  if no of BBM flag is set and page parameter is 0. After that modification
  way of discovering factory bad blocks will work similar as in kernel 
  version 5.1.

Cc: stable@vger.kernel.org
Fixes: f90da7818b14 (mtd: rawnand: Support bad block markers in first, second or last page)
Signed-off-by: Piotr Sroka <piotrs@cadence.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Changes for v2:
- add fix for micron nand driver
- add fixes and stable tags
---
 drivers/mtd/nand/raw/nand_base.c   | 8 ++++++--
 drivers/mtd/nand/raw/nand_micron.c | 4 +++-
 2 files changed, 9 insertions(+), 3 deletions(-)

Comments

Miquel Raynal Oct. 4, 2019, 4:04 p.m. UTC | #1
On Tue, 2019-09-24 at 05:54:31 UTC, Piotr Sroka wrote:
> Change calculating of position page containing BBM
> 
> If none of BBM flags are set then function nand_bbm_get_next_page 
> reports EINVAL. It causes that BBM is not read at all during scanning
> factory bad blocks. The result is that the BBT table is build without 
> checking factory BBM at all. For Micron flash memories none of these 
> flags are set if page size is different than 2048 bytes.
> 
> Address this regression by:
> - adding NAND_BBM_FIRSTPAGE chip flag without any condition. It solves
>   issue only for Micron devices.
> - changing the nand_bbm_get_next_page_function. It will return 0 
>   if no of BBM flag is set and page parameter is 0. After that modification
>   way of discovering factory bad blocks will work similar as in kernel 
>   version 5.1.
> 
> Cc: stable@vger.kernel.org
> Fixes: f90da7818b14 (mtd: rawnand: Support bad block markers in first, second or last page)
> Signed-off-by: Piotr Sroka <piotrs@cadence.com>
> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

Patch
diff mbox series

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 5c2c30a7dffa..f64e3b6605c6 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -292,12 +292,16 @@  int nand_bbm_get_next_page(struct nand_chip *chip, int page)
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	int last_page = ((mtd->erasesize - mtd->writesize) >>
 			 chip->page_shift) & chip->pagemask;
+	unsigned int bbm_flags = NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE
+		| NAND_BBM_LASTPAGE;
 
+	if (page == 0 && !(chip->options & bbm_flags))
+		return 0;
 	if (page == 0 && chip->options & NAND_BBM_FIRSTPAGE)
 		return 0;
-	else if (page <= 1 && chip->options & NAND_BBM_SECONDPAGE)
+	if (page <= 1 && chip->options & NAND_BBM_SECONDPAGE)
 		return 1;
-	else if (page <= last_page && chip->options & NAND_BBM_LASTPAGE)
+	if (page <= last_page && chip->options & NAND_BBM_LASTPAGE)
 		return last_page;
 
 	return -EINVAL;
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index 1622d3145587..913f42854563 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -438,8 +438,10 @@  static int micron_nand_init(struct nand_chip *chip)
 	if (ret)
 		goto err_free_manuf_data;
 
+	chip->options |= NAND_BBM_FIRSTPAGE;
+
 	if (mtd->writesize == 2048)
-		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
+		chip->options |= NAND_BBM_SECONDPAGE;
 
 	ondie = micron_supports_on_die_ecc(chip);