@@ -60,7 +60,7 @@ xor() {
ath9k_patch_fw_mac() {
local mac=$1
local mac_offset=$(($2))
- local chksum_offset=$(($3))
+ local chksum_offset=$3
local xor_mac
local xor_fw_mac
local xor_fw_chksum
@@ -78,7 +78,7 @@ ath9k_patch_fw_mac() {
xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
- dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
+ dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$(($chksum_offset)) count=2
}
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=$mac_offset count=1
@@ -103,7 +103,7 @@ ath9k_patch_fw_mac_crc() {
ath9k_patch_fw_mac() {
local mac=$1
local mac_offset=$(($2))
- local chksum_offset=$(($3))
+ local chksum_offset=$3
local xor_mac
local xor_fw_mac
local xor_fw_chksum
@@ -121,7 +121,7 @@ ath9k_patch_fw_mac() {
xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
- dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
+ dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$(($chksum_offset)) count=2
}
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$mac_offset count=6
If chksum_offset is converted by $(($...)) at the beginning, the check [ -n "$chksum_offset" ] will always return true, as the conversion yields "0" for an empty argument, and [ -n "0" ] is true. With this patch, the variable is not converted before the check, but only when it's used in dd. No conversion is done for use in hexdump, as this can deal with hex value offsets. Fixes: b133e466b08e ("treewide: convert WiFi caldata size and offset to hexadecimal") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> --- This is also sent as separate patch, as it is a fix, while this patchset is an enhancement. Since this patchset however depends on the fix, it was included here, as this is easier as describing the dependency. --- .../ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 4 ++-- .../lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)