@@ -384,7 +384,9 @@ static int sja1105_init_general_params(struct sja1105_private *priv)
/* Disallow dynamic changing of the mirror port */
.mirr_ptacu = 0,
.switchid = priv->ds->index,
- /* Priority queue for link-local frames trapped to CPU */
+ /* Priority queue for link-local management frames
+ * (both ingress to and egress from CPU - PTP, STP etc)
+ */
.hostprio = 7,
.mac_fltres1 = SJA1105_LINKLOCAL_FILTER_A,
.mac_flt1 = SJA1105_LINKLOCAL_FILTER_A_MASK,
@@ -1711,6 +1713,9 @@ static int sja1105_setup(struct dsa_switch *ds)
*/
ds->vlan_filtering_is_global = true;
+ /* Advertise the 8 egress queues */
+ ds->num_tx_queues = SJA1105_NUM_TC;
+
/* The DSA/switchdev model brings up switch ports in standalone mode by
* default, and that means vlan_filtering is 0 since they're not under
* a bridge, so it's safe to set up switch tagging at this time.
@@ -89,7 +89,8 @@ static struct sk_buff *sja1105_xmit(struct sk_buff *skb,
struct dsa_port *dp = dsa_slave_to_port(netdev);
struct dsa_switch *ds = dp->ds;
u16 tx_vid = dsa_8021q_tx_vid(ds, dp->index);
- u8 pcp = skb->priority;
+ u16 queue_mapping = skb_get_queue_mapping(skb);
+ u8 pcp = netdev_txq_to_tc(netdev, queue_mapping);
/* Transmitting management traffic does not rely upon switch tagging,
* but instead SPI-installed management routes. Part 2 of this
This is a preparation patch for the tc-taprio offload (and potentially for other future offloads such as tc-mqprio). Instead of looking directly at skb->priority during xmit, let's get the netdev queue and the queue-to-traffic-class mapping, and put the resulting traffic class into the dsa_8021q PCP field. The switch is configured with a 1-to-1 PCP-to-ingress-queue-to-egress-queue mapping (see vlan_pmap in sja1105_main.c), so the effect is that we can inject into a front-panel's egress traffic class through VLAN tagging from Linux, completely transparently. Unfortunately the switch doesn't look at the VLAN PCP in the case of management traffic to/from the CPU (link-local frames at 01-80-C2-xx-xx-xx or 01-1B-19-xx-xx-xx) so we can't alter the transmission queue of this type of traffic on a frame-by-frame basis. It is only selected through the "hostprio" setting which ATM is harcoded in the driver to 7. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> --- Changes since v1: - None, but the use of netdev_txq_to_tc is now finally correct after adjusting the gate_mask meaning in the taprio offload structure. Changes since RFC: - None. drivers/net/dsa/sja1105/sja1105_main.c | 7 ++++++- net/dsa/tag_sja1105.c | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-)