diff mbox series

[U-Boot,4/5] pico-imx6ul: Update the Falcon mode instructions

Message ID 20190912190155.3225623-4-otavio@ossystems.com.br
State Accepted
Commit e7cef770fbce18b1484a0fcbf690b7be74816d0a
Delegated to: Stefano Babic
Headers show
Series [U-Boot,1/5] pico-imx6ul: Add DWARF baseboard support | expand

Commit Message

Otavio Salvador Sept. 12, 2019, 7:01 p.m. UTC 
From: Fabio Estevam <festevam@gmail.com>

Sync the Falcon mode instructions with the ones fro pico-imx7d.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---

 board/technexion/pico-imx6ul/README | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/board/technexion/pico-imx6ul/README b/board/technexion/pico-imx6ul/README
index bb8ee3f463..40d4344142 100644
--- a/board/technexion/pico-imx6ul/README
+++ b/board/technexion/pico-imx6ul/README
@@ -75,7 +75,7 @@  $ make imx_v6_v7_defconfig (Using the default imx_v6_v7_defconfig configuration
 just for an example. In order to boot faster the user should customize the
 defconfig by only enabling the minimal required drivers).
 
-$ make -j4 uImage LOADADDR=0x80800000
+$ make -j4 uImage LOADADDR=0x80008000
 
 $ cp arch/arm/boot/uImage /tftpboot
 $ cp arch/arm/boot/dts/imx6ul-pico-hobbit.dtb /tftpboot
@@ -93,7 +93,7 @@  Get the kernel:
 => tftp ${loadaddr} uImage
 
 Write the kernel at 2MB offset:
-=> mmc write ${loadaddr} 0x1000 0x4000
+=> mmc write ${loadaddr} 0x1000 0x5000
 
 Setup the bootargs:
 => setenv bootargs 'console=ttymxc5,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw'
@@ -104,8 +104,8 @@  Prepare args:
    Image Name:   Linux-4.19.0-rc2-next-20180905-0
    Image Type:   ARM Linux Kernel Image (uncompressed)
    Data Size:    8365608 Bytes = 8 MiB
-   Load Address: 80800000
-   Entry Point:  80800000
+   Load Address: 80008000
+   Entry Point:  80008000
    Verifying Checksum ... OK
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000