Patchwork [U-Boot,V2] ARM: remove broken "ixpg425" and "ixpg425" boards

login
register
mail settings
Submitter Albert ARIBAUD
Date Sept. 23, 2011, 7:55 a.m.
Message ID <1316764519-3850-1-git-send-email-albert.u.boot@aribaud.net>
Download mbox | patch
Permalink /patch/116027/
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Comments

Albert ARIBAUD - Sept. 23, 2011, 7:55 a.m.
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Stefan Roese <sr@denx.de>
---
History:

V2: no change in code, only added missing Signed-off-by
    (and included Stefan's Ack)

 MAINTAINERS                |    2 -
 board/ixdp425/Makefile     |   50 --------
 board/ixdp425/ixdp425.c    |  238 ---------------------------------------
 boards.cfg                 |    2 -
 doc/README.scrapyard       |    2 +
 include/configs/ixdp425.h  |  268 --------------------------------------------
 include/configs/ixdpg425.h |  256 ------------------------------------------
 7 files changed, 2 insertions(+), 816 deletions(-)
 delete mode 100644 board/ixdp425/Makefile
 delete mode 100644 board/ixdp425/ixdp425.c
 delete mode 100644 include/configs/ixdp425.h
 delete mode 100644 include/configs/ixdpg425.h
Albert ARIBAUD - Sept. 27, 2011, 6:55 a.m.
Hi all,

On 23/09/2011 09:55, Albert ARIBAUD wrote:
> Signed-off-by: Albert ARIBAUD<albert.u.boot@aribaud.net>
> Acked-by: Stefan Roese<sr@denx.de>
> ---
> History:
>
> V2: no change in code, only added missing Signed-off-by
>      (and included Stefan's Ack)

Applied to u-boot-arm/master.

Amicalement,

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 2f60a60..5b2fb57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -786,7 +786,6 @@  John Rigby <jcrigby@gmail.com>
 
 Stefan Roese <sr@denx.de>
 
-	ixdpg425	xscale/ixp
 	pdnb3		xscale/ixp
 	scpu		xscale/ixp
 
@@ -894,7 +893,6 @@  Unknown / orphaned boards:
  	Board		CPU	Last known maintainer / Comment
 .........................................................................
 	cradle		xscale/pxa	Kyle Harris <kharris@nexus-tech.net> / dead address
-	ixdp425		xscale/ixp	Kyle Harris <kharris@nexus-tech.net> / dead address
 	lubbock		xscale/pxa	Kyle Harris <kharris@nexus-tech.net> / dead address
 
 	imx31_phycore_eet i.MX31  Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
diff --git a/board/ixdp425/Makefile b/board/ixdp425/Makefile
deleted file mode 100644
index 4ba0383..0000000
--- a/board/ixdp425/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@ 
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= ixdp425.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
deleted file mode 100644
index 7269458..0000000
--- a/board/ixdp425/ixdp425.c
+++ /dev/null
@@ -1,238 +0,0 @@ 
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <netdev.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/arch/ixp425pci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define IXDP425_LED_PORT 0x52000000 /* 4-digit hex display */
-
-int board_early_init_f(void)
-{
-	/* CS2: LED port */
-	writel(0xbcff0002, IXP425_EXP_CS2);
-	writew(0x0001, IXDP425_LED_PORT); /* output postcode to LEDs */
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_ixpdp425_config_table[] = {
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, PCI_ANY_ID,
-	  pci_cfgfunc_config_device,
-	  { 0x400,
-	    0x40000000,
-	    PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
-
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x01, PCI_ANY_ID,
-	  pci_cfgfunc_config_device,
-	  { 0x800,
-	    0x40010000,
-	    PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
-
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x02, PCI_ANY_ID,
-	  pci_cfgfunc_config_device,
-	  { 0xc00,
-	    0x40020000,
-	    PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
-
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x03, PCI_ANY_ID,
-	  pci_cfgfunc_config_device,
-	  { 0x1000,
-	    0x40030000,
-	    PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
-	{ }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_ixpdp425_config_table,
-#endif
-};
-#endif /* CONFIG_PCI */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	writew(0x0002, IXDP425_LED_PORT); /* output postcode to LEDs */
-
-#ifdef CONFIG_IXDPG425
-	/* arch number of IXDP */
-	gd->bd->bi_arch_number = MACH_TYPE_IXDPG425;
-#else
-	/* arch number of IXDP */
-	gd->bd->bi_arch_number = MACH_TYPE_IXDP425;
-#endif
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x00000100;
-
-#ifdef CONFIG_IXDPG425
-	/*
-	 * Get realtek RTL8305 switch and SLIC out of reset
-	 */
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SWITCH_RESET_N);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SWITCH_RESET_N);
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SLIC_RESET_N);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SLIC_RESET_N);
-
-	/*
-	 * Setup GPIOs for PCI INTA & INTB
-	 */
-	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA_N);
-	GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA_N);
-	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB_N);
-	GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB_N);
-
-	/* Setup GPIOs for 33MHz clock output */
-	writel(0x01FF01FF, IXP425_GPIO_GPCLKR);
-
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
-
-	/* set GPIO8..11 interrupt type to active low */
-	writel((0x1 << 9) | (0x1 << 6) | (0x1 << 3) | 0x1, IXP425_GPIO_GPIT2R);
-
-	/* clear pending interrupts */
-	writel(-1, IXP425_GPIO_GPISR);
-
-	/* assert PCI reset */
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_SLIC_RESET_N);
-
-	udelay(533);
-
-	/* deassert PCI reset */
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SLIC_RESET_N);
-
-	udelay(533);
-
-#else /* IXDP425 */
-	/* Setup GPIOs for 33MHz ExpBus and PCI clock output */
-	writel(0x01FF01FF, IXP425_GPIO_GPCLKR);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_RESET_N);
-
-	/* set GPIO8..11 interrupt type to active low */
-	writel((0x1 << 9) | (0x1 << 6) | (0x1 << 3) | 0x1, IXP425_GPIO_GPIT2R);
-	/* clear pending interrupts */
-	writel(-1, IXP425_GPIO_GPISR);
-
-	/* assert PCI reset */
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PCI_RESET_N);
-
-	udelay(533);
-
-	/* deassert PCI reset */
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_PCI_RESET_N);
-
-	udelay(533);
-#endif
-
-	return 0;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-#ifdef CONFIG_IXDPG425
-	puts("Board: IXDPG425 - Intel Network Gateway Reference Platform");
-#else
-	puts("Board: IXDP425 - Intel Development Platform");
-#endif
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	/* we can only map 64MB via PCI, so we limit memory
-	   until a better solution is implemented. */
-#ifdef CONFIG_PCI
-	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 64<<20);
-#else
-	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 256<<20);
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	pci_ixp_init(&hose);
-}
-
-/*
- * dev 0 on the PCI bus is not the host bridge, so we have to override
- * these functions in order to not skip PCI slot 0 during configuration.
-*/
-int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
-{
-	return 0;
-}
-int pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
-{
-	return 1;
-}
-
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_PCI
-	pci_eth_init(bis);
-#endif
-	return cpu_eth_init(bis);
-}
diff --git a/boards.cfg b/boards.cfg
index 8a5bfc1..d32ff7e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -194,8 +194,6 @@  actux2                       arm         ixp
 actux3                       arm         ixp
 actux4                       arm         ixp
 dvlhost                      arm         ixp
-ixdp425                      arm         ixp
-ixdpg425                     arm         ixp         ixdp425
 balloon3                     arm         pxa
 cerf250                      arm         pxa
 colibri_pxa270               arm         pxa
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index d68da2e..30aeccd 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -69,3 +69,5 @@  MVS1	powerpc	MPC823	306620b   2008-08-26	Andre Schwarz <andre.schwarz@matrix-vis
 adsvix	ARM	PXA27x	7610db1   2008-07-30	Adrian Filipi <adrian.filipi@eurotech.com>
 R5200	ColdFire	48ead7a   2008-03-31	Zachary P. Landau <zachary.landau@labxtechnologies.com>
 CPCI440	powerpc	440GP	b568fd2   2007-12-27	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ixdpg425 ARM xscale/ixp		- 2011-09-22	Stefan Roese <sr@denx.de>
+ixdp425 ARM xscale/ixp		- 2011-09-22	Kyle Harris <kharris@nexus-tech.net>
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
deleted file mode 100644
index d6ef3b3..0000000
--- a/include/configs/ixdp425.h
+++ /dev/null
@@ -1,268 +0,0 @@ 
-/*
- * (C) Copyright 2003
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * Configuation settings for the IXDP425 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_IXP425           1       /* This is an IXP425 CPU    */
-#define CONFIG_IXDP425          1       /* on an IXDP425 Board      */
-
-#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
-#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
-
-/*
- * select serial console configuration
- */
-#define CONFIG_IXP_SERIAL
-#define CONFIG_SYS_IXP425_CONSOLE	IXP425_UART1
-#define CONFIG_BAUDRATE         115200
-
-#define CONFIG_BOARD_EARLY_INIT_F	1
-
-/***************************************************************
- * U-boot generic defines start here.
- ***************************************************************/
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN      (CONFIG_ENV_SIZE + 128*1024)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Command line configuration. */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-
-#define CONFIG_PCI
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_IXP_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI_ENUM
-#define CONFIG_EEPRO100
-#endif
-
-#define CONFIG_BOOTCOMMAND		"run boot_flash"
-/* enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
-#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
-
-/* timer clock - 2* OSC_IN system clock */
-#define CONFIG_IXP425_TIMER_CLK                 66666666
-#define CONFIG_SYS_HZ				1000
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR			0x00010000
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
-
-/***************************************************************
- * Platform/Board specific defines start here.
- ***************************************************************/
-
-/*
- * Hardware drivers
- */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_SYS_TEXT_BASE	0x50000000
-
-#define PHYS_FLASH_1            0x50000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE         0x00800000 /* 8 MB */
-#define PHYS_FLASH_BANK_SIZE    0x00800000 /* 8 MB Banks */
-#define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
-
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_BOARD_SIZE_LIMIT		262144
-
-/* Expansion bus settings */
-#define CONFIG_SYS_EXP_CS0	0xbcd23c42
-
-/* SDRAM settings */
-#define CONFIG_NR_DRAM_BANKS    1          /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
-#define CONFIG_SYS_SDRAM_BASE	0x00000000
-
-#define CONFIG_SYS_SDR_CONFIG		0xd
-#define CONFIG_SYS_SDR_MODE_CONFIG	0x1
-#define CONFIG_SYS_SDRAM_REFRESH_CNT	0x81a
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT      128	/* max number of sectors on one chip    */
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
-#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
-#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
-
-/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* no byte writes on IXP4xx */
-#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Ethernet */
-
-/* include IXP4xx NPE support */
-#define CONFIG_IXP4XX_NPE		1
-#define CONFIG_NET_MULTI		1
-/* NPE0 PHY address */
-#define	CONFIG_PHY_ADDR			0
-/* NPE1 PHY address (HW Release E only) */
-#define	CONFIG_PHY1_ADDR		1
-/* MII PHY management */
-#define CONFIG_MII			1
-/* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SYS_RX_ETH_BUFFER		16
-
-#define CONFIG_HAS_ETH1			1
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#undef  CONFIG_CMD_NFS
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE		32
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"npe_ucode=50060000\0"						\
-	"mtd=IXP4XX-Flash.0:256k(uboot),128k(env),128k(ucode),2048k(linux),-(root)\0" \
-	"kerneladdr=50080000\0"						\
-	"kernelfile=ixdp425/uImage\0"					\
-	"rootfile=ixdp425/rootfs\0"					\
-	"rootaddr=50280000\0"						\
-	"loadaddr=10000\0"						\
-	"updateboot_ser=mw.b 10000 ff 40000;"				\
-	" loady ${loadaddr};"						\
-	" run eraseboot writeboot\0"					\
-	"updateboot_net=mw.b 10000 ff 40000;"				\
-	" tftp ${loadaddr} ixdp425/u-boot.bin;"				\
-	" run eraseboot writeboot\0"					\
-	"eraseboot=protect off 50000000 5003ffff;"			\
-	" erase 50000000 5003ffff\0"					\
-	"writeboot=cp.b 10000 50000000 ${filesize}\0"			\
-	"updateucode=loady;"						\
-	" era ${npe_ucode} +${filesize};"				\
-	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0"			\
-	"updateroot=tftp ${loadaddr} ${rootfile};"			\
-	" era ${rootaddr} +${filesize};"				\
-	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0"			\
-	"updatekern=tftp ${loadaddr} ${kernelfile};"			\
-	" era ${kerneladdr} +${filesize};"				\
-	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"			\
-	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4"	\
-	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
-	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"	\
-	"boot_flash=run flashargs addtty addeth;"			\
-	" bootm ${kerneladdr}\0"					\
-	"boot_net=run netargs addtty addeth;"				\
-	" tftpboot ${loadaddr} ${kernelfile};"				\
-	" bootm\0"
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_INIT_SP_ADDR						\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPIO_UTOPIA_GPIO1    0
-#define CONFIG_SYS_GPIO_UTOPIA_IRQ_N    1
-#define CONFIG_SYS_GPIO_HSS1_IRQ_N      2
-#define CONFIG_SYS_GPIO_HSS0_IRQ_N      3
-#define CONFIG_SYS_GPIO_ETH0_IRQ_N      4
-#define CONFIG_SYS_GPIO_ETH1_IRQ_N      5
-#define CONFIG_SYS_GPIO_I2C_SCL	        6
-#define CONFIG_SYS_GPIO_I2C_SDA	        7
-#define CONFIG_SYS_GPIO_PCI_INTD_N	8
-#define CONFIG_SYS_GPIO_PCI_INTC_N	9
-#define CONFIG_SYS_GPIO_PCI_INTB_N	10
-#define CONFIG_SYS_GPIO_PCI_INTA_N	11
-#define CONFIG_SYS_GPIO_UTOPIA_GPIO0	12
-#define CONFIG_SYS_GPIO_PCI_RESET_N	13
-#define CONFIG_SYS_GPIO_PCI_CLK	        14
-#define CONFIG_SYS_GPIO_EXTBUS_CLK	15
-
-#endif  /* __CONFIG_H */
diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h
deleted file mode 100644
index 3de0013..0000000
--- a/include/configs/ixdpg425.h
+++ /dev/null
@@ -1,256 +0,0 @@ 
-/*
- * (C) Copyright 2005-2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2003
- * Martijn de Gouw, Prodrive B.V., martijn.de.gouw@prodrive.nl
- *
- * Configuation settings for the IXDPG425 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_IXP425           1       /* This is an IXP425 CPU	*/
-#define CONFIG_IXDPG425         1       /* on an IXDPG425 Board		*/
-
-#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
-#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
-
-/*
- * Ethernet
- */
-#define CONFIG_IXP4XX_NPE	1	/* include IXP4xx NPE support	*/
-#define CONFIG_NET_MULTI	1
-#define	CONFIG_PHY_ADDR		5	/* NPE0 PHY address		*/
-#define CONFIG_HAS_ETH1
-#define CONFIG_PHY1_ADDR	4	/* NPE1 PHY address		*/
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_SYS_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
-
-/*
- * Misc configuration options
- */
-
-#define CONFIG_BOOTCOUNT_LIMIT		/* support for bootcount limit	*/
-#define CONFIG_SYS_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/
-
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_IXP_SERIAL
-#define CONFIG_BAUDRATE         115200
-#define CONFIG_SYS_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
-#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
-#define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
-
-#define CONFIG_IXP425_TIMER_CLK		66666666
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
-#endif
-
-/***************************************************************
- * Platform/Board specific defines start here.
- ***************************************************************/
-
-/*-----------------------------------------------------------------------
- * Default configuration (environment varibles...)
- *----------------------------------------------------------------------*/
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"hostname=ixdpg425\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addtty;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	        "bootm\0"						\
-	"rootpath=/opt/eldk/arm\0"					\
-	"bootfile=/tftpboot/ixdpg425/uImage\0"				\
-	"kernel_addr=50080000\0"					\
-	"ramdisk_addr=50200000\0"					\
-	"load=tftp 100000 /tftpboot/ixdpg425/u-boot.bin\0"		\
-	"update=protect off 50000000 5003ffff;era 50000000 5003ffff;"	\
-		"cp.b 100000 50000000 40000;"			        \
-		"setenv filesize;saveenv\0"				\
-	"upd=run load update\0"						\
-	""
-#define CONFIG_BOOTCOMMAND	"run net_nfs"
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS    1          /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE       0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_TEXT_BASE	0x50000000
-
-#define PHYS_FLASH_1            0x50000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE         0x01000000 /* 16 MB */
-#define PHYS_FLASH_BANK_SIZE    0x01000000 /* 16 MB Banks */
-#define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
-
-#define CONFIG_SYS_DRAM_BASE           0x00000000
-#define CONFIG_SYS_DRAM_SIZE           0x01000000
-
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-
-/*
- * Expansion bus settings
- */
-#define CONFIG_SYS_EXP_CS0		0xbcd23c42
-
-/*
- * SDRAM settings
- */
-#define CONFIG_SYS_SDR_CONFIG		0x18
-#define CONFIG_SYS_SDR_MODE_CONFIG	0x1
-#define CONFIG_SYS_SDRAM_REFRESH_CNT	0x81a
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT      128	/* max number of sectors on one chip    */
-
-#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
-#define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
-#define	CONFIG_ENV_IS_IN_FLASH	1
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware flash protection		*/
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-
-#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
-#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
-#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPIO_PCI_INTA_N	6
-#define CONFIG_SYS_GPIO_PCI_INTB_N	7
-#define CONFIG_SYS_GPIO_SWITCH_RESET_N	8
-#define CONFIG_SYS_GPIO_SLIC_RESET_N	13
-#define CONFIG_SYS_GPIO_PCI_CLK	14
-#define CONFIG_SYS_GPIO_EXTBUS_CLK	15
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_INIT_SP_ADDR						\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif  /* __CONFIG_H */