[U-Boot,3/6] arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node
diff mbox series

Message ID 20190910051050.17482-4-vigneshr@ti.com
State Superseded
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series
  • J721e: Add HyperBus support
Related show

Commit Message

Vignesh Raghavendra Sept. 10, 2019, 5:10 a.m. UTC
Add DT node for HyperBus Memory Controller in the FSS. On J721e, its not
possible to use OSPI0 and HBMC simultaneously as they are muxed within
the Flash Subsystem hence disable HBMC by default as keep OSPI enabled.
Bootloader will fixup DT when it detects HyperFlash instead of OSPI.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 arch/arm/dts/k3-j721e-mcu-wakeup.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
index 01a8f4a9908f..bb652f2fb8d4 100644
--- a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
@@ -118,4 +118,30 @@ 
 			loczrama = <1>;
 		};
 	};
+
+	fss: fss@47000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x47000000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: hbmc-mux {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+		};
+
+		hbmc: hyperbus@47034000 {
+			compatible = "ti,j721e-hbmc", "ti,am654-hbmc";
+			reg = <0x0 0x47034000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			mux-controls = <&hbmc_mux 0>;
+			assigned-clocks = <&k3_clks 102 0>;
+			assigned-clock-rates = <166666666>;
+		};
+	};
 };