Message ID | 20190909204906.2191290-1-taoren@fb.com |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | [net-next,v8,1/3] net: phy: modify assignment to OR for dev_flags in phy_attach_direct | expand |
Hi Andrew / Florian, On 9/9/19 1:49 PM, Tao Ren wrote: > From: Heiner Kallweit <hkallweit1@gmail.com> > > This patch adds support for clause 37 1000Base-X auto-negotiation. > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > Signed-off-by: Tao Ren <taoren@fb.com> > Tested-by: René van Dorst <opensource@vdorst.com> Just want to check if I missed your comments (I noticed some wired problems on my email client)? If yes (sorry I missed something), could you please re-send your comments? And I will address them as soon as possible. Thanks, Tao > --- > Changes in v8: > - Rebased the patch on top of net-next HEAD. > Changes in v7: > - Update "if (AUTONEG_ENABLE != phydev->autoneg)" to > "if (phydev->autoneg != AUTONEG_ENABLE)" so checkpatch.pl is happy. > Changes in v6: > - add "Signed-off-by: Tao Ren <taoren@fb.com>" > Changes in v1-v5: > - nothing changed. It's given v5 just to align with the version of > patch series. > > drivers/net/phy/phy_device.c | 139 +++++++++++++++++++++++++++++++++++ > include/linux/phy.h | 4 + > 2 files changed, 143 insertions(+) > > diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c > index 8933f07d39e9..dd05f750bb3f 100644 > --- a/drivers/net/phy/phy_device.c > +++ b/drivers/net/phy/phy_device.c > @@ -1607,6 +1607,40 @@ static int genphy_config_advert(struct phy_device *phydev) > return changed; > } > > +/** > + * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters > + * @phydev: target phy_device struct > + * > + * Description: Writes MII_ADVERTISE with the appropriate values, > + * after sanitizing the values to make sure we only advertise > + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement > + * hasn't changed, and > 0 if it has changed. This function is intended > + * for Clause 37 1000Base-X mode. > + */ > +static int genphy_c37_config_advert(struct phy_device *phydev) > +{ > + u16 adv = 0; > + > + /* Only allow advertising what this PHY supports */ > + linkmode_and(phydev->advertising, phydev->advertising, > + phydev->supported); > + > + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, > + phydev->advertising)) > + adv |= ADVERTISE_1000XFULL; > + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, > + phydev->advertising)) > + adv |= ADVERTISE_1000XPAUSE; > + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, > + phydev->advertising)) > + adv |= ADVERTISE_1000XPSE_ASYM; > + > + return phy_modify_changed(phydev, MII_ADVERTISE, > + ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | > + ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM, > + adv); > +} > + > /** > * genphy_config_eee_advert - disable unwanted eee mode advertisement > * @phydev: target phy_device struct > @@ -1715,6 +1749,54 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) > } > EXPORT_SYMBOL(__genphy_config_aneg); > > +/** > + * genphy_c37_config_aneg - restart auto-negotiation or write BMCR > + * @phydev: target phy_device struct > + * > + * Description: If auto-negotiation is enabled, we configure the > + * advertising, and then restart auto-negotiation. If it is not > + * enabled, then we write the BMCR. This function is intended > + * for use with Clause 37 1000Base-X mode. > + */ > +int genphy_c37_config_aneg(struct phy_device *phydev) > +{ > + int err, changed; > + > + if (phydev->autoneg != AUTONEG_ENABLE) > + return genphy_setup_forced(phydev); > + > + err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100, > + BMCR_SPEED1000); > + if (err) > + return err; > + > + changed = genphy_c37_config_advert(phydev); > + if (changed < 0) /* error */ > + return changed; > + > + if (!changed) { > + /* Advertisement hasn't changed, but maybe aneg was never on to > + * begin with? Or maybe phy was isolated? > + */ > + int ctl = phy_read(phydev, MII_BMCR); > + > + if (ctl < 0) > + return ctl; > + > + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) > + changed = 1; /* do restart aneg */ > + } > + > + /* Only restart aneg if we are advertising something different > + * than we were before. > + */ > + if (changed > 0) > + return genphy_restart_aneg(phydev); > + > + return 0; > +} > +EXPORT_SYMBOL(genphy_c37_config_aneg); > + > /** > * genphy_aneg_done - return auto-negotiation status > * @phydev: target phy_device struct > @@ -1862,6 +1944,63 @@ int genphy_read_status(struct phy_device *phydev) > } > EXPORT_SYMBOL(genphy_read_status); > > +/** > + * genphy_c37_read_status - check the link status and update current link state > + * @phydev: target phy_device struct > + * > + * Description: Check the link, then figure out the current state > + * by comparing what we advertise with what the link partner > + * advertises. This function is for Clause 37 1000Base-X mode. > + */ > +int genphy_c37_read_status(struct phy_device *phydev) > +{ > + int lpa, err, old_link = phydev->link; > + > + /* Update the link, but return if there was an error */ > + err = genphy_update_link(phydev); > + if (err) > + return err; > + > + /* why bother the PHY if nothing can have changed */ > + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) > + return 0; > + > + phydev->duplex = DUPLEX_UNKNOWN; > + phydev->pause = 0; > + phydev->asym_pause = 0; > + > + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { > + lpa = phy_read(phydev, MII_LPA); > + if (lpa < 0) > + return lpa; > + > + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, > + phydev->lp_advertising, lpa & LPA_LPACK); > + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, > + phydev->lp_advertising, lpa & LPA_1000XFULL); > + linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, > + phydev->lp_advertising, lpa & LPA_1000XPAUSE); > + linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, > + phydev->lp_advertising, > + lpa & LPA_1000XPAUSE_ASYM); > + > + phy_resolve_aneg_linkmode(phydev); > + } else if (phydev->autoneg == AUTONEG_DISABLE) { > + int bmcr = phy_read(phydev, MII_BMCR); > + > + if (bmcr < 0) > + return bmcr; > + > + if (bmcr & BMCR_FULLDPLX) > + phydev->duplex = DUPLEX_FULL; > + else > + phydev->duplex = DUPLEX_HALF; > + } > + > + return 0; > +} > +EXPORT_SYMBOL(genphy_c37_read_status); > + > /** > * genphy_soft_reset - software reset the PHY via BMCR_RESET bit > * @phydev: target phy_device struct > diff --git a/include/linux/phy.h b/include/linux/phy.h > index a7ecbe0e55aa..cd9786ccf630 100644 > --- a/include/linux/phy.h > +++ b/include/linux/phy.h > @@ -1104,6 +1104,10 @@ int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, > int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, > u16 regnum, u16 val); > > +/* Clause 37 */ > +int genphy_c37_config_aneg(struct phy_device *phydev); > +int genphy_c37_read_status(struct phy_device *phydev); > + > /* Clause 45 PHY */ > int genphy_c45_restart_aneg(struct phy_device *phydev); > int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart); >
On Mon, Sep 09, 2019 at 01:49:06PM -0700, Tao Ren wrote: > From: Heiner Kallweit <hkallweit1@gmail.com> > > This patch adds support for clause 37 1000Base-X auto-negotiation. > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > Signed-off-by: Tao Ren <taoren@fb.com> > Tested-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
On 9/14/19 7:17 AM, Andrew Lunn wrote: > On Mon, Sep 09, 2019 at 01:49:06PM -0700, Tao Ren wrote: >> From: Heiner Kallweit <hkallweit1@gmail.com> >> >> This patch adds support for clause 37 1000Base-X auto-negotiation. >> >> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >> Signed-off-by: Tao Ren <taoren@fb.com> >> Tested-by: René van Dorst <opensource@vdorst.com> > > Reviewed-by: Andrew Lunn <andrew@lunn.ch> > > Andrew Thanks a lot, Andrew. Cheers, Tao
Hi David, Can you please apply the patch series to net-next tree when you have bandwidth? All the 3 patches are reviewed. Thanks, Tao On 9/14/19 7:17 AM, Andrew Lunn wrote: > On Mon, Sep 09, 2019 at 01:49:06PM -0700, Tao Ren wrote: >> From: Heiner Kallweit <hkallweit1@gmail.com> >> >> This patch adds support for clause 37 1000Base-X auto-negotiation. >> >> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >> Signed-off-by: Tao Ren <taoren@fb.com> >> Tested-by: René van Dorst <opensource@vdorst.com> > > Reviewed-by: Andrew Lunn <andrew@lunn.ch> > > Andrew >
From: Tao Ren <taoren@fb.com> Date: Tue, 15 Oct 2019 17:16:26 +0000 > Can you please apply the patch series to net-next tree when you have > bandwidth? All the 3 patches are reviewed. If it is not active in patchwork you need to repost.
On 10/15/19 10:20 AM, David Miller wrote: > From: Tao Ren <taoren@fb.com> > Date: Tue, 15 Oct 2019 17:16:26 +0000 > >> Can you please apply the patch series to net-next tree when you have >> bandwidth? All the 3 patches are reviewed. > > If it is not active in patchwork you need to repost. Got it. Let me check and repost soon. Thanks, Tao
On 10/15/19 10:20 AM, David Miller wrote: > From: Tao Ren <taoren@fb.com> > Date: Tue, 15 Oct 2019 17:16:26 +0000 > >> Can you please apply the patch series to net-next tree when you have >> bandwidth? All the 3 patches are reviewed. > > If it is not active in patchwork you need to repost. > Tao, can you pick up this series and provide a proper cover letter for it (git format-patch --cover-letter) that way it can be picked up by David?
On 10/15/19 10:22 AM, Florian Fainelli wrote: > On 10/15/19 10:20 AM, David Miller wrote: >> From: Tao Ren <taoren@fb.com> >> Date: Tue, 15 Oct 2019 17:16:26 +0000 >> >>> Can you please apply the patch series to net-next tree when you have >>> bandwidth? All the 3 patches are reviewed. >> >> If it is not active in patchwork you need to repost. >> > > Tao, can you pick up this series and provide a proper cover letter for > it (git format-patch --cover-letter) that way it can be picked up by David? Sure. Thank you for the suggestion. Will do it. Thanks, Tao
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8933f07d39e9..dd05f750bb3f 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1607,6 +1607,40 @@ static int genphy_config_advert(struct phy_device *phydev) return changed; } +/** + * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters + * @phydev: target phy_device struct + * + * Description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. This function is intended + * for Clause 37 1000Base-X mode. + */ +static int genphy_c37_config_advert(struct phy_device *phydev) +{ + u16 adv = 0; + + /* Only allow advertising what this PHY supports */ + linkmode_and(phydev->advertising, phydev->advertising, + phydev->supported); + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XFULL; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPAUSE; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPSE_ASYM; + + return phy_modify_changed(phydev, MII_ADVERTISE, + ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | + ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM, + adv); +} + /** * genphy_config_eee_advert - disable unwanted eee mode advertisement * @phydev: target phy_device struct @@ -1715,6 +1749,54 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) } EXPORT_SYMBOL(__genphy_config_aneg); +/** + * genphy_c37_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. This function is intended + * for use with Clause 37 1000Base-X mode. + */ +int genphy_c37_config_aneg(struct phy_device *phydev) +{ + int err, changed; + + if (phydev->autoneg != AUTONEG_ENABLE) + return genphy_setup_forced(phydev); + + err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100, + BMCR_SPEED1000); + if (err) + return err; + + changed = genphy_c37_config_advert(phydev); + if (changed < 0) /* error */ + return changed; + + if (!changed) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? + */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + changed = 1; /* do restart aneg */ + } + + /* Only restart aneg if we are advertising something different + * than we were before. + */ + if (changed > 0) + return genphy_restart_aneg(phydev); + + return 0; +} +EXPORT_SYMBOL(genphy_c37_config_aneg); + /** * genphy_aneg_done - return auto-negotiation status * @phydev: target phy_device struct @@ -1862,6 +1944,63 @@ int genphy_read_status(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_read_status); +/** + * genphy_c37_read_status - check the link status and update current link state + * @phydev: target phy_device struct + * + * Description: Check the link, then figure out the current state + * by comparing what we advertise with what the link partner + * advertises. This function is for Clause 37 1000Base-X mode. + */ +int genphy_c37_read_status(struct phy_device *phydev) +{ + int lpa, err, old_link = phydev->link; + + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + /* why bother the PHY if nothing can have changed */ + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + return 0; + + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { + lpa = phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->lp_advertising, lpa & LPA_LPACK); + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->lp_advertising, lpa & LPA_1000XFULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->lp_advertising, lpa & LPA_1000XPAUSE); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->lp_advertising, + lpa & LPA_1000XPAUSE_ASYM); + + phy_resolve_aneg_linkmode(phydev); + } else if (phydev->autoneg == AUTONEG_DISABLE) { + int bmcr = phy_read(phydev, MII_BMCR); + + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + } + + return 0; +} +EXPORT_SYMBOL(genphy_c37_read_status); + /** * genphy_soft_reset - software reset the PHY via BMCR_RESET bit * @phydev: target phy_device struct diff --git a/include/linux/phy.h b/include/linux/phy.h index a7ecbe0e55aa..cd9786ccf630 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1104,6 +1104,10 @@ int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, u16 regnum, u16 val); +/* Clause 37 */ +int genphy_c37_config_aneg(struct phy_device *phydev); +int genphy_c37_read_status(struct phy_device *phydev); + /* Clause 45 PHY */ int genphy_c45_restart_aneg(struct phy_device *phydev); int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart);