Message ID | 20190909202034.27508-4-geomatsi@gmail.com |
---|---|
State | Accepted |
Headers | show |
Series | [v2,1/3] package/wpa_supplicant: add Config.in option for WPA3 support | expand |
Sergey, On Mon, Sep 9, 2019 at 3:18 PM Sergey Matyukevich <geomatsi@gmail.com> wrote: > > New wpa_supplicant v2.9 enables by default AP, P2P, WIFI_DISPLAY > features in defconfig. However these features make sense only for > wpa_supplicant drivers supporting AP mode. > > That is why, for consistent configuration, these features should > be explicitely disabled in wpa_supplicant .config file unless > they are requested by Config.in options. > > Note that at the moment AP support in Buildroot can be enabled > only for NL80211 driver. > Fixes http://autobuild.buildroot.net/results/d37672374db935ac29953263ec68a2786ee65cc2/ Tested-by: Matt Weber <matthew.weber@rockwellcollins.com> > Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> > --- > package/wpa_supplicant/wpa_supplicant.mk | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/package/wpa_supplicant/wpa_supplicant.mk b/package/wpa_supplicant/wpa_supplicant.mk > index 283c006052..9dcebca9bf 100644 > --- a/package/wpa_supplicant/wpa_supplicant.mk > +++ b/package/wpa_supplicant/wpa_supplicant.mk > @@ -67,10 +67,16 @@ ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT),y) > WPA_SUPPLICANT_CONFIG_ENABLE += \ > CONFIG_AP \ > CONFIG_P2P > +else > +WPA_SUPPLICANT_CONFIG_DISABLE += \ > + CONFIG_AP \ > + CONFIG_P2P > endif > > ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY),y) > WPA_SUPPLICANT_CONFIG_ENABLE += CONFIG_WIFI_DISPLAY > +else > +WPA_SUPPLICANT_CONFIG_DISABLE += CONFIG_WIFI_DISPLAY > endif > > ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING),y) > -- > 2.23.0 > -- Matthew Weber | Associate Director Software Engineer | Commercial Avionics COLLINS AEROSPACE 400 Collins Road NE, Cedar Rapids, Iowa 52498, USA Tel: +1 319 295 7349 | FAX: +1 319 263 6099 matthew.weber@collins.com | collinsaerospace.com CONFIDENTIALITY WARNING: This message may contain proprietary and/or privileged information of Collins Aerospace and its affiliated companies. If you are not the intended recipient, please 1) Do not disclose, copy, distribute or use this message or its contents. 2) Advise the sender by return email. 3) Delete all copies (including all attachments) from your computer. Your cooperation is greatly appreciated. Any export restricted material should be shared using my matthew.weber@corp.rockwellcollins.com address.
diff --git a/package/wpa_supplicant/wpa_supplicant.mk b/package/wpa_supplicant/wpa_supplicant.mk index 283c006052..9dcebca9bf 100644 --- a/package/wpa_supplicant/wpa_supplicant.mk +++ b/package/wpa_supplicant/wpa_supplicant.mk @@ -67,10 +67,16 @@ ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT),y) WPA_SUPPLICANT_CONFIG_ENABLE += \ CONFIG_AP \ CONFIG_P2P +else +WPA_SUPPLICANT_CONFIG_DISABLE += \ + CONFIG_AP \ + CONFIG_P2P endif ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY),y) WPA_SUPPLICANT_CONFIG_ENABLE += CONFIG_WIFI_DISPLAY +else +WPA_SUPPLICANT_CONFIG_DISABLE += CONFIG_WIFI_DISPLAY endif ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING),y)
New wpa_supplicant v2.9 enables by default AP, P2P, WIFI_DISPLAY features in defconfig. However these features make sense only for wpa_supplicant drivers supporting AP mode. That is why, for consistent configuration, these features should be explicitely disabled in wpa_supplicant .config file unless they are requested by Config.in options. Note that at the moment AP support in Buildroot can be enabled only for NL80211 driver. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> --- package/wpa_supplicant/wpa_supplicant.mk | 6 ++++++ 1 file changed, 6 insertions(+)