| Message ID | 20190906062623.13354-1-rashmica.g@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add ast2600 gpio support | expand |
On Fri, 6 Sep 2019 at 06:26, Rashmica Gupta <rashmica.g@gmail.com> wrote: > > The current calculation for the number of GPIO banks is only correct if > the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would > currently say there are 0 banks, which is incorrect). > > Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver') > > Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.d.au> > --- > drivers/gpio/gpio-aspeed.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c > index 9defe25d4721..b83e23aecd18 100644 > --- a/drivers/gpio/gpio-aspeed.c > +++ b/drivers/gpio/gpio-aspeed.c > @@ -1165,7 +1165,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) > gpio->chip.base = -1; > > /* Allocate a cache of the output registers */ > - banks = gpio->config->nr_gpios >> 5; > + banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32); > gpio->dcache = devm_kcalloc(&pdev->dev, > banks, sizeof(u32), GFP_KERNEL); > if (!gpio->dcache) > -- > 2.20.1 >
On Fri, Sep 6, 2019 at 7:26 AM Rashmica Gupta <rashmica.g@gmail.com> wrote: > The current calculation for the number of GPIO banks is only correct if > the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would > currently say there are 0 banks, which is incorrect). > > Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver') > > Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Patch applied. Yours, Linus Walleij
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index 9defe25d4721..b83e23aecd18 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -1165,7 +1165,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) gpio->chip.base = -1; /* Allocate a cache of the output registers */ - banks = gpio->config->nr_gpios >> 5; + banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32); gpio->dcache = devm_kcalloc(&pdev->dev, banks, sizeof(u32), GFP_KERNEL); if (!gpio->dcache)
The current calculation for the number of GPIO banks is only correct if the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would currently say there are 0 banks, which is incorrect). Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver') Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> --- drivers/gpio/gpio-aspeed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)