[RESEND,v7,1/3] dt-bindings: usb: hd3ss3220 device tree binding document
diff mbox series

Message ID 1567584941-13690-2-git-send-email-biju.das@bp.renesas.com
State Not Applicable
Headers show
Series
  • Add USB3.0 and TI HD3SS3220 driver support
Related show

Commit Message

Biju Das Sept. 4, 2019, 8:15 a.m. UTC
Add device tree binding document for TI HD3SS3220 Type-C DRP port
controller driver.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
V7--> V7 RESEND
   * Added Rob's Reviewed by tag.
v6-->V7
   * Removed Rob's reviewed by tag, since there is a rework
   * Incorporated Sergie and Shimoda-San's review comment
     (https://patchwork.kernel.org/patch/10944629/)
V5-->V6
  * No change.
V4-->V5
  * No Change.
V3-->V4
  * No Change.
V2-->V3
  * Added Rob's Reviewed by tag.
V1-->V2
  * Added connector node.
  * updated the example with connector node.
---
 .../devicetree/bindings/usb/ti,hd3ss3220.txt       | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
new file mode 100644
index 0000000..25780e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -0,0 +1,38 @@ 
+TI HD3SS3220 TypeC DRP Port Controller.
+
+Required properties:
+ - compatible: Must be "ti,hd3ss3220".
+ - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
+ - interrupts: An interrupt specifier.
+
+Required sub-node:
+ - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
+   bindings of the connector node are specified in:
+
+	Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+hd3ss3220@47 {
+	compatible = "ti,hd3ss3220";
+	reg = <0x47>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				hd3ss3220_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};