[v3,09/11] PCI: layerscape: Add EP mode support for ls1088a and ls2088a
diff mbox series

Message ID 20190902031716.43195-10-xiaowei.bao@nxp.com
State New
Delegated to: Lorenzo Pieralisi
Headers show
Series
  • *** SUBJECT HERE ***
Related show

Commit Message

Xiaowei Bao Sept. 2, 2019, 3:17 a.m. UTC
Add PCIe EP mode support for ls1088a and ls2088a, there are some
difference between LS1 and LS2 platform, so refactor the code of
the EP driver.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
v2: 
 - This is a new patch for supporting the ls1088a and ls2088a platform.
v3:
 - Adjust the some struct assignment order in probe function.

 drivers/pci/controller/dwc/pci-layerscape-ep.c | 72 +++++++++++++++++++-------
 1 file changed, 53 insertions(+), 19 deletions(-)

Comments

Andrew Murray Sept. 2, 2019, 12:46 p.m. UTC | #1
On Mon, Sep 02, 2019 at 11:17:14AM +0800, Xiaowei Bao wrote:
> Add PCIe EP mode support for ls1088a and ls2088a, there are some
> difference between LS1 and LS2 platform, so refactor the code of
> the EP driver.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> ---
> v2: 
>  - This is a new patch for supporting the ls1088a and ls2088a platform.
> v3:
>  - Adjust the some struct assignment order in probe function.
> 
>  drivers/pci/controller/dwc/pci-layerscape-ep.c | 72 +++++++++++++++++++-------
>  1 file changed, 53 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index 5f0cb99..723bbe5 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -20,27 +20,29 @@
>  
>  #define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
>  
> -struct ls_pcie_ep {
> -	struct dw_pcie		*pci;
> -	struct pci_epc_features	*ls_epc;
> +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> +
> +struct ls_pcie_ep_drvdata {
> +	u32				func_offset;
> +	const struct dw_pcie_ep_ops	*ops;
> +	const struct dw_pcie_ops	*dw_pcie_ops;
>  };
>  
> -#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> +struct ls_pcie_ep {
> +	struct dw_pcie			*pci;
> +	struct pci_epc_features		*ls_epc;
> +	const struct ls_pcie_ep_drvdata *drvdata;
> +};
>  
>  static int ls_pcie_establish_link(struct dw_pcie *pci)
>  {
>  	return 0;
>  }
>  
> -static const struct dw_pcie_ops ls_pcie_ep_ops = {
> +static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
>  	.start_link = ls_pcie_establish_link,
>  };
>  
> -static const struct of_device_id ls_pcie_ep_of_match[] = {
> -	{ .compatible = "fsl,ls-pcie-ep",},
> -	{ },
> -};
> -
>  static const struct pci_epc_features*
>  ls_pcie_ep_get_features(struct dw_pcie_ep *ep)
>  {
> @@ -87,10 +89,39 @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
>  	}
>  }
>  
> -static const struct dw_pcie_ep_ops pcie_ep_ops = {
> +static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
> +						u8 func_no)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +	struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
> +
> +	WARN_ON(func_no && !pcie->drvdata->func_offset);
> +	return pcie->drvdata->func_offset * func_no;
> +}
> +
> +static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
>  	.ep_init = ls_pcie_ep_init,
>  	.raise_irq = ls_pcie_ep_raise_irq,
>  	.get_features = ls_pcie_ep_get_features,
> +	.func_conf_select = ls_pcie_ep_func_conf_select,
> +};
> +
> +static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
> +	.ops = &ls_pcie_ep_ops,
> +	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
> +};
> +
> +static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
> +	.func_offset = 0x20000,
> +	.ops = &ls_pcie_ep_ops,
> +	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
> +};
> +
> +static const struct of_device_id ls_pcie_ep_of_match[] = {
> +	{ .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
> +	{ .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
> +	{ .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
> +	{ },

This removes support for "fsl,ls-pcie-ep" - was that intentional? If you do
plan to drop it please make sure you explain why in the commit message. See
also my comments in your dt-binding patch.

Thanks,

Andrew Murray

>  };
>  
>  static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> @@ -103,7 +134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
>  	int ret;
>  
>  	ep = &pci->ep;
> -	ep->ops = &pcie_ep_ops;
> +	ep->ops = pcie->drvdata->ops;
>  
>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
>  	if (!res)
> @@ -142,20 +173,23 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
>  	if (!ls_epc)
>  		return -ENOMEM;
>  
> -	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> -	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> -	if (IS_ERR(pci->dbi_base))
> -		return PTR_ERR(pci->dbi_base);
> +	pcie->drvdata = of_device_get_match_data(dev);
>  
> -	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
>  	pci->dev = dev;
> -	pci->ops = &ls_pcie_ep_ops;
> -	pcie->pci = pci;
> +	pci->ops = pcie->drvdata->dw_pcie_ops;
>  
>  	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
>  
> +	pcie->pci = pci;
>  	pcie->ls_epc = ls_epc;
>  
> +	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> +	if (IS_ERR(pci->dbi_base))
> +		return PTR_ERR(pci->dbi_base);
> +
> +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> +
>  	platform_set_drvdata(pdev, pcie);
>  
>  	ret = ls_add_pcie_ep(pcie, pdev);
> -- 
> 2.9.5
>
Xiaowei Bao Sept. 3, 2019, 1:47 a.m. UTC | #2
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2019年9月2日 20:46
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> <zhiqiang.hou@nxp.com>
> Subject: Re: [PATCH v3 09/11] PCI: layerscape: Add EP mode support for
> ls1088a and ls2088a
> 
> On Mon, Sep 02, 2019 at 11:17:14AM +0800, Xiaowei Bao wrote:
> > Add PCIe EP mode support for ls1088a and ls2088a, there are some
> > difference between LS1 and LS2 platform, so refactor the code of the
> > EP driver.
> >
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > ---
> > v2:
> >  - This is a new patch for supporting the ls1088a and ls2088a platform.
> > v3:
> >  - Adjust the some struct assignment order in probe function.
> >
> >  drivers/pci/controller/dwc/pci-layerscape-ep.c | 72
> > +++++++++++++++++++-------
> >  1 file changed, 53 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > index 5f0cb99..723bbe5 100644
> > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > @@ -20,27 +20,29 @@
> >
> >  #define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> >
> > -struct ls_pcie_ep {
> > -	struct dw_pcie		*pci;
> > -	struct pci_epc_features	*ls_epc;
> > +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > +
> > +struct ls_pcie_ep_drvdata {
> > +	u32				func_offset;
> > +	const struct dw_pcie_ep_ops	*ops;
> > +	const struct dw_pcie_ops	*dw_pcie_ops;
> >  };
> >
> > -#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > +struct ls_pcie_ep {
> > +	struct dw_pcie			*pci;
> > +	struct pci_epc_features		*ls_epc;
> > +	const struct ls_pcie_ep_drvdata *drvdata; };
> >
> >  static int ls_pcie_establish_link(struct dw_pcie *pci)  {
> >  	return 0;
> >  }
> >
> > -static const struct dw_pcie_ops ls_pcie_ep_ops = {
> > +static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
> >  	.start_link = ls_pcie_establish_link,  };
> >
> > -static const struct of_device_id ls_pcie_ep_of_match[] = {
> > -	{ .compatible = "fsl,ls-pcie-ep",},
> > -	{ },
> > -};
> > -
> >  static const struct pci_epc_features*  ls_pcie_ep_get_features(struct
> > dw_pcie_ep *ep)  { @@ -87,10 +89,39 @@ static int
> > ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> >  	}
> >  }
> >
> > -static const struct dw_pcie_ep_ops pcie_ep_ops = {
> > +static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
> > +						u8 func_no)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +	struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
> > +
> > +	WARN_ON(func_no && !pcie->drvdata->func_offset);
> > +	return pcie->drvdata->func_offset * func_no; }
> > +
> > +static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
> >  	.ep_init = ls_pcie_ep_init,
> >  	.raise_irq = ls_pcie_ep_raise_irq,
> >  	.get_features = ls_pcie_ep_get_features,
> > +	.func_conf_select = ls_pcie_ep_func_conf_select, };
> > +
> > +static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
> > +	.ops = &ls_pcie_ep_ops,
> > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
> > +};
> > +
> > +static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
> > +	.func_offset = 0x20000,
> > +	.ops = &ls_pcie_ep_ops,
> > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
> > +};
> > +
> > +static const struct of_device_id ls_pcie_ep_of_match[] = {
> > +	{ .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
> > +	{ .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
> > +	{ .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
> > +	{ },
> 
> This removes support for "fsl,ls-pcie-ep" - was that intentional? If you do plan
> to drop it please make sure you explain why in the commit message. See also
> my comments in your dt-binding patch.

In fact, the u-boot will fixup the status property to 'status = enabled' in PCI node of 
the DTS base on "fsl,ls-pcie-ep" compatible, so "fsl,ls-pcie-ep" is used, I used this
compatible before, because the driver only support the LS1046a, but this time, I add
the LS1088a and LS2088a support, and these two boards have some difference form
LS1046a, so I changed the compatible. I am not sure whether need to add "fsl,ls-pcie-ep"
in there, could you give some advice, thanks a lot.

Thanks 
Xiaowei
 
> 
> Thanks,
> 
> Andrew Murray
> 
> >  };
> >
> >  static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie, @@ -103,7
> > +134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> >  	int ret;
> >
> >  	ep = &pci->ep;
> > -	ep->ops = &pcie_ep_ops;
> > +	ep->ops = pcie->drvdata->ops;
> >
> >  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "addr_space");
> >  	if (!res)
> > @@ -142,20 +173,23 @@ static int __init ls_pcie_ep_probe(struct
> platform_device *pdev)
> >  	if (!ls_epc)
> >  		return -ENOMEM;
> >
> > -	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "regs");
> > -	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > -	if (IS_ERR(pci->dbi_base))
> > -		return PTR_ERR(pci->dbi_base);
> > +	pcie->drvdata = of_device_get_match_data(dev);
> >
> > -	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> >  	pci->dev = dev;
> > -	pci->ops = &ls_pcie_ep_ops;
> > -	pcie->pci = pci;
> > +	pci->ops = pcie->drvdata->dw_pcie_ops;
> >
> >  	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
> >
> > +	pcie->pci = pci;
> >  	pcie->ls_epc = ls_epc;
> >
> > +	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "regs");
> > +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > +	if (IS_ERR(pci->dbi_base))
> > +		return PTR_ERR(pci->dbi_base);
> > +
> > +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > +
> >  	platform_set_drvdata(pdev, pcie);
> >
> >  	ret = ls_add_pcie_ep(pcie, pdev);
> > --
> > 2.9.5
> >
Andrew Murray Sept. 12, 2019, 12:49 p.m. UTC | #3
On Tue, Sep 03, 2019 at 01:47:36AM +0000, Xiaowei Bao wrote:
> 
> 
> > -----Original Message-----
> > From: Andrew Murray <andrew.murray@arm.com>
> > Sent: 2019年9月2日 20:46
> > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> > Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> > Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> > arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> > <zhiqiang.hou@nxp.com>
> > Subject: Re: [PATCH v3 09/11] PCI: layerscape: Add EP mode support for
> > ls1088a and ls2088a
> > 
> > On Mon, Sep 02, 2019 at 11:17:14AM +0800, Xiaowei Bao wrote:
> > > Add PCIe EP mode support for ls1088a and ls2088a, there are some
> > > difference between LS1 and LS2 platform, so refactor the code of the
> > > EP driver.
> > >
> > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > ---
> > > v2:
> > >  - This is a new patch for supporting the ls1088a and ls2088a platform.
> > > v3:
> > >  - Adjust the some struct assignment order in probe function.
> > >
> > >  drivers/pci/controller/dwc/pci-layerscape-ep.c | 72
> > > +++++++++++++++++++-------
> > >  1 file changed, 53 insertions(+), 19 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > index 5f0cb99..723bbe5 100644
> > > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > @@ -20,27 +20,29 @@
> > >
> > >  #define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> > >
> > > -struct ls_pcie_ep {
> > > -	struct dw_pcie		*pci;
> > > -	struct pci_epc_features	*ls_epc;
> > > +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > > +
> > > +struct ls_pcie_ep_drvdata {
> > > +	u32				func_offset;
> > > +	const struct dw_pcie_ep_ops	*ops;
> > > +	const struct dw_pcie_ops	*dw_pcie_ops;
> > >  };
> > >
> > > -#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > > +struct ls_pcie_ep {
> > > +	struct dw_pcie			*pci;
> > > +	struct pci_epc_features		*ls_epc;
> > > +	const struct ls_pcie_ep_drvdata *drvdata; };
> > >
> > >  static int ls_pcie_establish_link(struct dw_pcie *pci)  {
> > >  	return 0;
> > >  }
> > >
> > > -static const struct dw_pcie_ops ls_pcie_ep_ops = {
> > > +static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
> > >  	.start_link = ls_pcie_establish_link,  };
> > >
> > > -static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > -	{ .compatible = "fsl,ls-pcie-ep",},
> > > -	{ },
> > > -};
> > > -
> > >  static const struct pci_epc_features*  ls_pcie_ep_get_features(struct
> > > dw_pcie_ep *ep)  { @@ -87,10 +89,39 @@ static int
> > > ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> > >  	}
> > >  }
> > >
> > > -static const struct dw_pcie_ep_ops pcie_ep_ops = {
> > > +static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
> > > +						u8 func_no)
> > > +{
> > > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > +	struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
> > > +
> > > +	WARN_ON(func_no && !pcie->drvdata->func_offset);
> > > +	return pcie->drvdata->func_offset * func_no; }
> > > +
> > > +static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
> > >  	.ep_init = ls_pcie_ep_init,
> > >  	.raise_irq = ls_pcie_ep_raise_irq,
> > >  	.get_features = ls_pcie_ep_get_features,
> > > +	.func_conf_select = ls_pcie_ep_func_conf_select, };
> > > +
> > > +static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
> > > +	.ops = &ls_pcie_ep_ops,
> > > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
> > > +};
> > > +
> > > +static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
> > > +	.func_offset = 0x20000,
> > > +	.ops = &ls_pcie_ep_ops,
> > > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
> > > +};
> > > +
> > > +static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > +	{ .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
> > > +	{ .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
> > > +	{ .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
> > > +	{ },
> > 
> > This removes support for "fsl,ls-pcie-ep" - was that intentional? If you do plan
> > to drop it please make sure you explain why in the commit message. See also
> > my comments in your dt-binding patch.
> 
> In fact, the u-boot will fixup the status property to 'status = enabled' in PCI node of 
> the DTS base on "fsl,ls-pcie-ep" compatible, so "fsl,ls-pcie-ep" is used, I used this
> compatible before, because the driver only support the LS1046a, but this time, I add
> the LS1088a and LS2088a support, and these two boards have some difference form
> LS1046a, so I changed the compatible. I am not sure whether need to add "fsl,ls-pcie-ep"
> in there, could you give some advice, thanks a lot.

It sounds like "fsl,ls-pcie-ep" can be a fallback for "fsl,ls1046a-pcie-ep".

I'm assuming that if someone used "fsl,ls1046a-pcie-ep" on ls1088a or ls2088a
hardware it would still work, but without the multiple PF support.

I.e. if "fsl,ls-pcie-ep" is given, treat it as ls1046a.

Thanks,

Andrew Murray

> 
> Thanks 
> Xiaowei
>  
> > 
> > Thanks,
> > 
> > Andrew Murray
> > 
> > >  };
> > >
> > >  static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie, @@ -103,7
> > > +134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
> > >  	int ret;
> > >
> > >  	ep = &pci->ep;
> > > -	ep->ops = &pcie_ep_ops;
> > > +	ep->ops = pcie->drvdata->ops;
> > >
> > >  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > "addr_space");
> > >  	if (!res)
> > > @@ -142,20 +173,23 @@ static int __init ls_pcie_ep_probe(struct
> > platform_device *pdev)
> > >  	if (!ls_epc)
> > >  		return -ENOMEM;
> > >
> > > -	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > "regs");
> > > -	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > > -	if (IS_ERR(pci->dbi_base))
> > > -		return PTR_ERR(pci->dbi_base);
> > > +	pcie->drvdata = of_device_get_match_data(dev);
> > >
> > > -	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > >  	pci->dev = dev;
> > > -	pci->ops = &ls_pcie_ep_ops;
> > > -	pcie->pci = pci;
> > > +	pci->ops = pcie->drvdata->dw_pcie_ops;
> > >
> > >  	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
> > >
> > > +	pcie->pci = pci;
> > >  	pcie->ls_epc = ls_epc;
> > >
> > > +	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > "regs");
> > > +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > > +	if (IS_ERR(pci->dbi_base))
> > > +		return PTR_ERR(pci->dbi_base);
> > > +
> > > +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > > +
> > >  	platform_set_drvdata(pdev, pcie);
> > >
> > >  	ret = ls_add_pcie_ep(pcie, pdev);
> > > --
> > > 2.9.5
> > >
Xiaowei Bao Sept. 14, 2019, 4:10 a.m. UTC | #4
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2019年9月12日 20:50
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> <zhiqiang.hou@nxp.com>
> Subject: Re: [PATCH v3 09/11] PCI: layerscape: Add EP mode support for
> ls1088a and ls2088a
> 
> On Tue, Sep 03, 2019 at 01:47:36AM +0000, Xiaowei Bao wrote:
> >
> >
> > > -----Original Message-----
> > > From: Andrew Murray <andrew.murray@arm.com>
> > > Sent: 2019年9月2日 20:46
> > > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org;
> > > Leo Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com;
> M.h.
> > > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> > > Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> > > arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> > > <zhiqiang.hou@nxp.com>
> > > Subject: Re: [PATCH v3 09/11] PCI: layerscape: Add EP mode support
> > > for ls1088a and ls2088a
> > >
> > > On Mon, Sep 02, 2019 at 11:17:14AM +0800, Xiaowei Bao wrote:
> > > > Add PCIe EP mode support for ls1088a and ls2088a, there are some
> > > > difference between LS1 and LS2 platform, so refactor the code of
> > > > the EP driver.
> > > >
> > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > ---
> > > > v2:
> > > >  - This is a new patch for supporting the ls1088a and ls2088a platform.
> > > > v3:
> > > >  - Adjust the some struct assignment order in probe function.
> > > >
> > > >  drivers/pci/controller/dwc/pci-layerscape-ep.c | 72
> > > > +++++++++++++++++++-------
> > > >  1 file changed, 53 insertions(+), 19 deletions(-)
> > > >
> > > > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > index 5f0cb99..723bbe5 100644
> > > > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > @@ -20,27 +20,29 @@
> > > >
> > > >  #define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> > > >
> > > > -struct ls_pcie_ep {
> > > > -	struct dw_pcie		*pci;
> > > > -	struct pci_epc_features	*ls_epc;
> > > > +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > > > +
> > > > +struct ls_pcie_ep_drvdata {
> > > > +	u32				func_offset;
> > > > +	const struct dw_pcie_ep_ops	*ops;
> > > > +	const struct dw_pcie_ops	*dw_pcie_ops;
> > > >  };
> > > >
> > > > -#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > > > +struct ls_pcie_ep {
> > > > +	struct dw_pcie			*pci;
> > > > +	struct pci_epc_features		*ls_epc;
> > > > +	const struct ls_pcie_ep_drvdata *drvdata; };
> > > >
> > > >  static int ls_pcie_establish_link(struct dw_pcie *pci)  {
> > > >  	return 0;
> > > >  }
> > > >
> > > > -static const struct dw_pcie_ops ls_pcie_ep_ops = {
> > > > +static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
> > > >  	.start_link = ls_pcie_establish_link,  };
> > > >
> > > > -static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > > -	{ .compatible = "fsl,ls-pcie-ep",},
> > > > -	{ },
> > > > -};
> > > > -
> > > >  static const struct pci_epc_features*
> > > > ls_pcie_ep_get_features(struct dw_pcie_ep *ep)  { @@ -87,10 +89,39
> > > > @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> > > >  	}
> > > >  }
> > > >
> > > > -static const struct dw_pcie_ep_ops pcie_ep_ops = {
> > > > +static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep
> *ep,
> > > > +						u8 func_no)
> > > > +{
> > > > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > +	struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
> > > > +
> > > > +	WARN_ON(func_no && !pcie->drvdata->func_offset);
> > > > +	return pcie->drvdata->func_offset * func_no; }
> > > > +
> > > > +static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
> > > >  	.ep_init = ls_pcie_ep_init,
> > > >  	.raise_irq = ls_pcie_ep_raise_irq,
> > > >  	.get_features = ls_pcie_ep_get_features,
> > > > +	.func_conf_select = ls_pcie_ep_func_conf_select, };
> > > > +
> > > > +static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
> > > > +	.ops = &ls_pcie_ep_ops,
> > > > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops, };
> > > > +
> > > > +static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
> > > > +	.func_offset = 0x20000,
> > > > +	.ops = &ls_pcie_ep_ops,
> > > > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops, };
> > > > +
> > > > +static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > > +	{ .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
> > > > +	{ .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
> > > > +	{ .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
> > > > +	{ },
> > >
> > > This removes support for "fsl,ls-pcie-ep" - was that intentional? If
> > > you do plan to drop it please make sure you explain why in the
> > > commit message. See also my comments in your dt-binding patch.
> >
> > In fact, the u-boot will fixup the status property to 'status =
> > enabled' in PCI node of the DTS base on "fsl,ls-pcie-ep" compatible,
> > so "fsl,ls-pcie-ep" is used, I used this compatible before, because
> > the driver only support the LS1046a, but this time, I add the LS1088a
> > and LS2088a support, and these two boards have some difference form
> LS1046a, so I changed the compatible. I am not sure whether need to add
> "fsl,ls-pcie-ep"
> > in there, could you give some advice, thanks a lot.
> 
> It sounds like "fsl,ls-pcie-ep" can be a fallback for "fsl,ls1046a-pcie-ep".

This is not a fallback, the compatible "fsl,ls1046a-pcie-ep" is used by bootloader,
the bootloader will modify the status property, the bootloader code get the
PCI_HEADER_TYPE(0xe) of config space to decide enable which node(EP or RC)
status property. At the beginning, we plan to use one compatible "fsl,ls1046a-pcie-ep"
support all NXP's platform, but actually, due to the difference of each platform,
it is difficult.

> 
> I'm assuming that if someone used "fsl,ls1046a-pcie-ep" on ls1088a or
> ls2088a hardware it would still work, but without the multiple PF support.
> 

I think the EP driver will not work if use current code, due to the current driver
need driver data. 

> I.e. if "fsl,ls-pcie-ep" is given, treat it as ls1046a.



> 
> Thanks,
> 
> Andrew Murray
> 
> >
> > Thanks
> > Xiaowei
> >
> > >
> > > Thanks,
> > >
> > > Andrew Murray
> > >
> > > >  };
> > > >
> > > >  static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie, @@
> > > > -103,7
> > > > +134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep
> > > > +*pcie,
> > > >  	int ret;
> > > >
> > > >  	ep = &pci->ep;
> > > > -	ep->ops = &pcie_ep_ops;
> > > > +	ep->ops = pcie->drvdata->ops;
> > > >
> > > >  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > > "addr_space");
> > > >  	if (!res)
> > > > @@ -142,20 +173,23 @@ static int __init ls_pcie_ep_probe(struct
> > > platform_device *pdev)
> > > >  	if (!ls_epc)
> > > >  		return -ENOMEM;
> > > >
> > > > -	dbi_base = platform_get_resource_byname(pdev,
> IORESOURCE_MEM,
> > > "regs");
> > > > -	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > > > -	if (IS_ERR(pci->dbi_base))
> > > > -		return PTR_ERR(pci->dbi_base);
> > > > +	pcie->drvdata = of_device_get_match_data(dev);
> > > >
> > > > -	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > > >  	pci->dev = dev;
> > > > -	pci->ops = &ls_pcie_ep_ops;
> > > > -	pcie->pci = pci;
> > > > +	pci->ops = pcie->drvdata->dw_pcie_ops;
> > > >
> > > >  	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
> > > >
> > > > +	pcie->pci = pci;
> > > >  	pcie->ls_epc = ls_epc;
> > > >
> > > > +	dbi_base = platform_get_resource_byname(pdev,
> IORESOURCE_MEM,
> > > "regs");
> > > > +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > > > +	if (IS_ERR(pci->dbi_base))
> > > > +		return PTR_ERR(pci->dbi_base);
> > > > +
> > > > +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > > > +
> > > >  	platform_set_drvdata(pdev, pcie);
> > > >
> > > >  	ret = ls_add_pcie_ep(pcie, pdev);
> > > > --
> > > > 2.9.5
> > > >
Andrew Murray Sept. 16, 2019, 2:37 p.m. UTC | #5
On Sat, Sep 14, 2019 at 04:10:22AM +0000, Xiaowei Bao wrote:
> 
> 
> > -----Original Message-----
> > From: Andrew Murray <andrew.murray@arm.com>
> > Sent: 2019年9月12日 20:50
> > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> > Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> > Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> > arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> > <zhiqiang.hou@nxp.com>
> > Subject: Re: [PATCH v3 09/11] PCI: layerscape: Add EP mode support for
> > ls1088a and ls2088a
> > 
> > On Tue, Sep 03, 2019 at 01:47:36AM +0000, Xiaowei Bao wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Andrew Murray <andrew.murray@arm.com>
> > > > Sent: 2019年9月2日 20:46
> > > > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org;
> > > > Leo Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com;
> > M.h.
> > > > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> > > > Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > > > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> > > > arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> > > > <zhiqiang.hou@nxp.com>
> > > > Subject: Re: [PATCH v3 09/11] PCI: layerscape: Add EP mode support
> > > > for ls1088a and ls2088a
> > > >
> > > > On Mon, Sep 02, 2019 at 11:17:14AM +0800, Xiaowei Bao wrote:
> > > > > Add PCIe EP mode support for ls1088a and ls2088a, there are some
> > > > > difference between LS1 and LS2 platform, so refactor the code of
> > > > > the EP driver.
> > > > >
> > > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > > ---
> > > > > v2:
> > > > >  - This is a new patch for supporting the ls1088a and ls2088a platform.
> > > > > v3:
> > > > >  - Adjust the some struct assignment order in probe function.
> > > > >
> > > > >  drivers/pci/controller/dwc/pci-layerscape-ep.c | 72
> > > > > +++++++++++++++++++-------
> > > > >  1 file changed, 53 insertions(+), 19 deletions(-)
> > > > >
> > > > > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > index 5f0cb99..723bbe5 100644
> > > > > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > @@ -20,27 +20,29 @@
> > > > >
> > > > >  #define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> > > > >
> > > > > -struct ls_pcie_ep {
> > > > > -	struct dw_pcie		*pci;
> > > > > -	struct pci_epc_features	*ls_epc;
> > > > > +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > > > > +
> > > > > +struct ls_pcie_ep_drvdata {
> > > > > +	u32				func_offset;
> > > > > +	const struct dw_pcie_ep_ops	*ops;
> > > > > +	const struct dw_pcie_ops	*dw_pcie_ops;
> > > > >  };
> > > > >
> > > > > -#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > > > > +struct ls_pcie_ep {
> > > > > +	struct dw_pcie			*pci;
> > > > > +	struct pci_epc_features		*ls_epc;
> > > > > +	const struct ls_pcie_ep_drvdata *drvdata; };
> > > > >
> > > > >  static int ls_pcie_establish_link(struct dw_pcie *pci)  {
> > > > >  	return 0;
> > > > >  }
> > > > >
> > > > > -static const struct dw_pcie_ops ls_pcie_ep_ops = {
> > > > > +static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
> > > > >  	.start_link = ls_pcie_establish_link,  };
> > > > >
> > > > > -static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > > > -	{ .compatible = "fsl,ls-pcie-ep",},
> > > > > -	{ },
> > > > > -};
> > > > > -
> > > > >  static const struct pci_epc_features*
> > > > > ls_pcie_ep_get_features(struct dw_pcie_ep *ep)  { @@ -87,10 +89,39
> > > > > @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> > > > >  	}
> > > > >  }
> > > > >
> > > > > -static const struct dw_pcie_ep_ops pcie_ep_ops = {
> > > > > +static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep
> > *ep,
> > > > > +						u8 func_no)
> > > > > +{
> > > > > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > +	struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
> > > > > +
> > > > > +	WARN_ON(func_no && !pcie->drvdata->func_offset);
> > > > > +	return pcie->drvdata->func_offset * func_no; }
> > > > > +
> > > > > +static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
> > > > >  	.ep_init = ls_pcie_ep_init,
> > > > >  	.raise_irq = ls_pcie_ep_raise_irq,
> > > > >  	.get_features = ls_pcie_ep_get_features,
> > > > > +	.func_conf_select = ls_pcie_ep_func_conf_select, };
> > > > > +
> > > > > +static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
> > > > > +	.ops = &ls_pcie_ep_ops,
> > > > > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops, };
> > > > > +
> > > > > +static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
> > > > > +	.func_offset = 0x20000,
> > > > > +	.ops = &ls_pcie_ep_ops,
> > > > > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops, };
> > > > > +
> > > > > +static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > > > +	{ .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
> > > > > +	{ .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
> > > > > +	{ .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
> > > > > +	{ },
> > > >
> > > > This removes support for "fsl,ls-pcie-ep" - was that intentional? If
> > > > you do plan to drop it please make sure you explain why in the
> > > > commit message. See also my comments in your dt-binding patch.
> > >
> > > In fact, the u-boot will fixup the status property to 'status =
> > > enabled' in PCI node of the DTS base on "fsl,ls-pcie-ep" compatible,
> > > so "fsl,ls-pcie-ep" is used, I used this compatible before, because
> > > the driver only support the LS1046a, but this time, I add the LS1088a
> > > and LS2088a support, and these two boards have some difference form
> > LS1046a, so I changed the compatible. I am not sure whether need to add
> > "fsl,ls-pcie-ep"
> > > in there, could you give some advice, thanks a lot.
> > 
> > It sounds like "fsl,ls-pcie-ep" can be a fallback for "fsl,ls1046a-pcie-ep".
> 
> This is not a fallback, the compatible "fsl,ls1046a-pcie-ep" is used by bootloader,
> the bootloader will modify the status property, the bootloader code get the
> PCI_HEADER_TYPE(0xe) of config space to decide enable which node(EP or RC)
> status property. At the beginning, we plan to use one compatible "fsl,ls1046a-pcie-ep"
> support all NXP's platform, but actually, due to the difference of each platform,
> it is difficult.

I've looked at the U-Boot source [1] and device trees, I think I understand
what happens here.

The DT describes disabled nodes for both fsl,lsXXXXX-pcie and
fsl,lxXXXXX-pcie-ep. U-Boot looks at the nodes and compares with the actual PCI
config space to determine the current hardware configuration type. It will
then *enable* either the RC or EP.

However U-Boot currently only looks for a compatible string with "fsl,ls-pcie"
or "fsl,ls-pcie-ep". This is why the DT needs to describe a PCI node as both
"fsl,lsXXXXX-pcie-ep" and "fsl,ls-pcie" - the first for kernel and the second
for the U-Boot. (The second is no longer needed by the kernel driver as you
are now using the more specific names).

Looking again at your bindings patch...

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index e20ceaa..762ae41 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -22,7 +22,9 @@  Required properties:
         "fsl,ls1043a-pcie"
         "fsl,ls1012a-pcie"
   EP mode:
-	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1046a-pcie-ep" "fsl,ls-pcie-ep"
+	"fsl,ls1088a-pcie-ep" "fsl,ls-pcie-ep"
+	"fsl,ls2088a-pcie-ep" "fsl,ls-pcie-ep"

... the "fsl,ls-pcie-ep" is added *only* to the EP mode.

But doesn't U-Boot need "fsl,ls-pcie-ep" added to each of the RC modes as
well, to ensure they are set to enabled before booting the kernel?

Rob - Do we document compatible names like this that are used in the DT
but not used by the kernel?

In any case, prior to this series it would have been possible to use a
ls1046a device with a DT that has only string "fsl,ls-pcie-ep" - now that
doesn't work. If this is of concern then &ls1_ep_drvdata should also be
used for fsl,ls-pcie-ep.

Thanks,

Andrew Murray

[1] https://gitlab.denx.de/u-boot/u-boot/blob/master/drivers/pci/pcie_layerscape_fixup.c

> 
> > 
> > I'm assuming that if someone used "fsl,ls1046a-pcie-ep" on ls1088a or
> > ls2088a hardware it would still work, but without the multiple PF support.
> > 
> 
> I think the EP driver will not work if use current code, due to the current driver
> need driver data. 
> 
> > I.e. if "fsl,ls-pcie-ep" is given, treat it as ls1046a.
> 
> 
> 
> > 
> > Thanks,
> > 
> > Andrew Murray
> > 
> > >
> > > Thanks
> > > Xiaowei
> > >
> > > >
> > > > Thanks,
> > > >
> > > > Andrew Murray
> > > >
> > > > >  };
> > > > >
> > > > >  static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie, @@
> > > > > -103,7
> > > > > +134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep
> > > > > +*pcie,
> > > > >  	int ret;
> > > > >
> > > > >  	ep = &pci->ep;
> > > > > -	ep->ops = &pcie_ep_ops;
> > > > > +	ep->ops = pcie->drvdata->ops;
> > > > >
> > > > >  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > > > "addr_space");
> > > > >  	if (!res)
> > > > > @@ -142,20 +173,23 @@ static int __init ls_pcie_ep_probe(struct
> > > > platform_device *pdev)
> > > > >  	if (!ls_epc)
> > > > >  		return -ENOMEM;
> > > > >
> > > > > -	dbi_base = platform_get_resource_byname(pdev,
> > IORESOURCE_MEM,
> > > > "regs");
> > > > > -	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > > > > -	if (IS_ERR(pci->dbi_base))
> > > > > -		return PTR_ERR(pci->dbi_base);
> > > > > +	pcie->drvdata = of_device_get_match_data(dev);
> > > > >
> > > > > -	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > > > >  	pci->dev = dev;
> > > > > -	pci->ops = &ls_pcie_ep_ops;
> > > > > -	pcie->pci = pci;
> > > > > +	pci->ops = pcie->drvdata->dw_pcie_ops;
> > > > >
> > > > >  	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
> > > > >
> > > > > +	pcie->pci = pci;
> > > > >  	pcie->ls_epc = ls_epc;
> > > > >
> > > > > +	dbi_base = platform_get_resource_byname(pdev,
> > IORESOURCE_MEM,
> > > > "regs");
> > > > > +	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > > > > +	if (IS_ERR(pci->dbi_base))
> > > > > +		return PTR_ERR(pci->dbi_base);
> > > > > +
> > > > > +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > > > > +
> > > > >  	platform_set_drvdata(pdev, pcie);
> > > > >
> > > > >  	ret = ls_add_pcie_ep(pcie, pdev);
> > > > > --
> > > > > 2.9.5
> > > > >
Xiaowei Bao Sept. 18, 2019, 3:17 a.m. UTC | #6
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2019年9月16日 22:38
> To: Xiaowei Bao <xiaowei.bao@nxp.com>; robh+dt@kernel.org
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> <zhiqiang.hou@nxp.com>
> Subject: Re: [PATCH v3 09/11] PCI: layerscape: Add EP mode support for
> ls1088a and ls2088a
> 
> On Sat, Sep 14, 2019 at 04:10:22AM +0000, Xiaowei Bao wrote:
> >
> >
> > > -----Original Message-----
> > > From: Andrew Murray <andrew.murray@arm.com>
> > > Sent: 2019年9月12日 20:50
> > > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org;
> > > Leo Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com;
> M.h.
> > > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> > > Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> > > arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> > > <zhiqiang.hou@nxp.com>
> > > Subject: Re: [PATCH v3 09/11] PCI: layerscape: Add EP mode support
> > > for ls1088a and ls2088a
> > >
> > > On Tue, Sep 03, 2019 at 01:47:36AM +0000, Xiaowei Bao wrote:
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Andrew Murray <andrew.murray@arm.com>
> > > > > Sent: 2019年9月2日 20:46
> > > > > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > > Cc: robh+dt@kernel.org; mark.rutland@arm.com;
> > > > > shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com;
> > > > > lorenzo.pieralisi@arm.com;
> > > M.h.
> > > > > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>;
> > > > > Roy Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > > > > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > > > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > > > linux-arm-kernel@lists.infradead.org;
> > > > > linuxppc-dev@lists.ozlabs.org; arnd@arndb.de;
> > > > > gregkh@linuxfoundation.org; Z.q. Hou <zhiqiang.hou@nxp.com>
> > > > > Subject: Re: [PATCH v3 09/11] PCI: layerscape: Add EP mode
> > > > > support for ls1088a and ls2088a
> > > > >
> > > > > On Mon, Sep 02, 2019 at 11:17:14AM +0800, Xiaowei Bao wrote:
> > > > > > Add PCIe EP mode support for ls1088a and ls2088a, there are
> > > > > > some difference between LS1 and LS2 platform, so refactor the
> > > > > > code of the EP driver.
> > > > > >
> > > > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > > > ---
> > > > > > v2:
> > > > > >  - This is a new patch for supporting the ls1088a and ls2088a
> platform.
> > > > > > v3:
> > > > > >  - Adjust the some struct assignment order in probe function.
> > > > > >
> > > > > >  drivers/pci/controller/dwc/pci-layerscape-ep.c | 72
> > > > > > +++++++++++++++++++-------
> > > > > >  1 file changed, 53 insertions(+), 19 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > > index 5f0cb99..723bbe5 100644
> > > > > > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > > > > @@ -20,27 +20,29 @@
> > > > > >
> > > > > >  #define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
> > > > > >
> > > > > > -struct ls_pcie_ep {
> > > > > > -	struct dw_pcie		*pci;
> > > > > > -	struct pci_epc_features	*ls_epc;
> > > > > > +#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > > > > > +
> > > > > > +struct ls_pcie_ep_drvdata {
> > > > > > +	u32				func_offset;
> > > > > > +	const struct dw_pcie_ep_ops	*ops;
> > > > > > +	const struct dw_pcie_ops	*dw_pcie_ops;
> > > > > >  };
> > > > > >
> > > > > > -#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
> > > > > > +struct ls_pcie_ep {
> > > > > > +	struct dw_pcie			*pci;
> > > > > > +	struct pci_epc_features		*ls_epc;
> > > > > > +	const struct ls_pcie_ep_drvdata *drvdata; };
> > > > > >
> > > > > >  static int ls_pcie_establish_link(struct dw_pcie *pci)  {
> > > > > >  	return 0;
> > > > > >  }
> > > > > >
> > > > > > -static const struct dw_pcie_ops ls_pcie_ep_ops = {
> > > > > > +static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
> > > > > >  	.start_link = ls_pcie_establish_link,  };
> > > > > >
> > > > > > -static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > > > > -	{ .compatible = "fsl,ls-pcie-ep",},
> > > > > > -	{ },
> > > > > > -};
> > > > > > -
> > > > > >  static const struct pci_epc_features*
> > > > > > ls_pcie_ep_get_features(struct dw_pcie_ep *ep)  { @@ -87,10
> > > > > > +89,39 @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep,
> u8 func_no,
> > > > > >  	}
> > > > > >  }
> > > > > >
> > > > > > -static const struct dw_pcie_ep_ops pcie_ep_ops = {
> > > > > > +static unsigned int ls_pcie_ep_func_conf_select(struct
> > > > > > +dw_pcie_ep
> > > *ep,
> > > > > > +						u8 func_no)
> > > > > > +{
> > > > > > +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > > +	struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
> > > > > > +
> > > > > > +	WARN_ON(func_no && !pcie->drvdata->func_offset);
> > > > > > +	return pcie->drvdata->func_offset * func_no; }
> > > > > > +
> > > > > > +static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
> > > > > >  	.ep_init = ls_pcie_ep_init,
> > > > > >  	.raise_irq = ls_pcie_ep_raise_irq,
> > > > > >  	.get_features = ls_pcie_ep_get_features,
> > > > > > +	.func_conf_select = ls_pcie_ep_func_conf_select, };
> > > > > > +
> > > > > > +static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
> > > > > > +	.ops = &ls_pcie_ep_ops,
> > > > > > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops, };
> > > > > > +
> > > > > > +static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
> > > > > > +	.func_offset = 0x20000,
> > > > > > +	.ops = &ls_pcie_ep_ops,
> > > > > > +	.dw_pcie_ops = &dw_ls_pcie_ep_ops, };
> > > > > > +
> > > > > > +static const struct of_device_id ls_pcie_ep_of_match[] = {
> > > > > > +	{ .compatible = "fsl,ls1046a-pcie-ep", .data =
> &ls1_ep_drvdata },
> > > > > > +	{ .compatible = "fsl,ls1088a-pcie-ep", .data =
> &ls2_ep_drvdata },
> > > > > > +	{ .compatible = "fsl,ls2088a-pcie-ep", .data =
> &ls2_ep_drvdata },
> > > > > > +	{ },
> > > > >
> > > > > This removes support for "fsl,ls-pcie-ep" - was that
> > > > > intentional? If you do plan to drop it please make sure you
> > > > > explain why in the commit message. See also my comments in your
> dt-binding patch.
> > > >
> > > > In fact, the u-boot will fixup the status property to 'status =
> > > > enabled' in PCI node of the DTS base on "fsl,ls-pcie-ep"
> > > > compatible, so "fsl,ls-pcie-ep" is used, I used this compatible
> > > > before, because the driver only support the LS1046a, but this
> > > > time, I add the LS1088a and LS2088a support, and these two boards
> > > > have some difference form
> > > LS1046a, so I changed the compatible. I am not sure whether need to
> > > add "fsl,ls-pcie-ep"
> > > > in there, could you give some advice, thanks a lot.
> > >
> > > It sounds like "fsl,ls-pcie-ep" can be a fallback for "fsl,ls1046a-pcie-ep".
> >
> > This is not a fallback, the compatible "fsl,ls1046a-pcie-ep" is used
> > by bootloader, the bootloader will modify the status property, the
> > bootloader code get the
> > PCI_HEADER_TYPE(0xe) of config space to decide enable which node(EP or
> > RC) status property. At the beginning, we plan to use one compatible
> "fsl,ls1046a-pcie-ep"
> > support all NXP's platform, but actually, due to the difference of
> > each platform, it is difficult.
> 
> I've looked at the U-Boot source [1] and device trees, I think I understand
> what happens here.
> 
> The DT describes disabled nodes for both fsl,lsXXXXX-pcie and
> fsl,lxXXXXX-pcie-ep. U-Boot looks at the nodes and compares with the actual
> PCI config space to determine the current hardware configuration type. It will
> then *enable* either the RC or EP.

Yes, you are correct.

> 
> However U-Boot currently only looks for a compatible string with "fsl,ls-pcie"
> or "fsl,ls-pcie-ep". This is why the DT needs to describe a PCI node as both
> "fsl,lsXXXXX-pcie-ep" and "fsl,ls-pcie" - the first for kernel and the second for
> the U-Boot. (The second is no longer needed by the kernel driver as you are
> now using the more specific names).

The fact is that the compatible "fsl,ls-pcie-ep" is used for match the driver at first,
and community of opensource advice reserve the compatible "fsl,lsXXXXX-pcie-ep"
for other platforms, at present, the compatible "fsl,ls-pcie-ep" is also used to 
match the driver, and "fsl,lsXXXXX-pcie-ep" used to difference the platforms, please
refer to the drivers/pci/controller/dwc/pci-layerscape.c, it is similar.
 



> 
> Looking again at your bindings patch...
> 
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index e20ceaa..762ae41 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -22,7 +22,9 @@  Required properties:
>          "fsl,ls1043a-pcie"
>          "fsl,ls1012a-pcie"
>    EP mode:
> -	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
> +	"fsl,ls1046a-pcie-ep" "fsl,ls-pcie-ep"
> +	"fsl,ls1088a-pcie-ep" "fsl,ls-pcie-ep"
> +	"fsl,ls2088a-pcie-ep" "fsl,ls-pcie-ep"
> 
> ... the "fsl,ls-pcie-ep" is added *only* to the EP mode.
> 
> But doesn't U-Boot need "fsl,ls-pcie-ep" added to each of the RC modes as
> well, to ensure they are set to enabled before booting the kernel?
> 
> Rob - Do we document compatible names like this that are used in the DT but
> not used by the kernel?
> 
> In any case, prior to this series it would have been possible to use a ls1046a
> device with a DT that has only string "fsl,ls-pcie-ep" - now that doesn't work.
> If this is of concern then &ls1_ep_drvdata should also be used for
> fsl,ls-pcie-ep.
> 
> Thanks,
> 
> Andrew Murray
> 
> [1]
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.
> denx.de%2Fu-boot%2Fu-boot%2Fblob%2Fmaster%2Fdrivers%2Fpci%2Fpcie_l
> ayerscape_fixup.c&amp;data=02%7C01%7Cxiaowei.bao%40nxp.com%7Ccf3
> 3c1b76cb74f1cb41308d73ab37330%7C686ea1d3bc2b4c6fa92cd99c5c30163
> 5%7C0%7C1%7C637042414749368155&amp;sdata=uVvfeT8AnOlPS%2ByBZ9
> Y4%2BHNJIA6MPx2sfWUBiD75IRY%3D&amp;reserved=0
> 
> >
> > >
> > > I'm assuming that if someone used "fsl,ls1046a-pcie-ep" on ls1088a
> > > or ls2088a hardware it would still work, but without the multiple PF
> support.
> > >
> >
> > I think the EP driver will not work if use current code, due to the
> > current driver need driver data.
> >
> > > I.e. if "fsl,ls-pcie-ep" is given, treat it as ls1046a.
> >
> >
> >
> > >
> > > Thanks,
> > >
> > > Andrew Murray
> > >
> > > >
> > > > Thanks
> > > > Xiaowei
> > > >
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Andrew Murray
> > > > >
> > > > > >  };
> > > > > >
> > > > > >  static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie, @@
> > > > > > -103,7
> > > > > > +134,7 @@ static int __init ls_add_pcie_ep(struct ls_pcie_ep
> > > > > > +*pcie,
> > > > > >  	int ret;
> > > > > >
> > > > > >  	ep = &pci->ep;
> > > > > > -	ep->ops = &pcie_ep_ops;
> > > > > > +	ep->ops = pcie->drvdata->ops;
> > > > > >
> > > > > >  	res = platform_get_resource_byname(pdev,
> IORESOURCE_MEM,
> > > > > "addr_space");
> > > > > >  	if (!res)
> > > > > > @@ -142,20 +173,23 @@ static int __init
> > > > > > ls_pcie_ep_probe(struct
> > > > > platform_device *pdev)
> > > > > >  	if (!ls_epc)
> > > > > >  		return -ENOMEM;
> > > > > >
> > > > > > -	dbi_base = platform_get_resource_byname(pdev,
> > > IORESOURCE_MEM,
> > > > > "regs");
> > > > > > -	pci->dbi_base = devm_pci_remap_cfg_resource(dev,
> dbi_base);
> > > > > > -	if (IS_ERR(pci->dbi_base))
> > > > > > -		return PTR_ERR(pci->dbi_base);
> > > > > > +	pcie->drvdata = of_device_get_match_data(dev);
> > > > > >
> > > > > > -	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > > > > >  	pci->dev = dev;
> > > > > > -	pci->ops = &ls_pcie_ep_ops;
> > > > > > -	pcie->pci = pci;
> > > > > > +	pci->ops = pcie->drvdata->dw_pcie_ops;
> > > > > >
> > > > > >  	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
> > > > > >
> > > > > > +	pcie->pci = pci;
> > > > > >  	pcie->ls_epc = ls_epc;
> > > > > >
> > > > > > +	dbi_base = platform_get_resource_byname(pdev,
> > > IORESOURCE_MEM,
> > > > > "regs");
> > > > > > +	pci->dbi_base = devm_pci_remap_cfg_resource(dev,
> dbi_base);
> > > > > > +	if (IS_ERR(pci->dbi_base))
> > > > > > +		return PTR_ERR(pci->dbi_base);
> > > > > > +
> > > > > > +	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
> > > > > > +
> > > > > >  	platform_set_drvdata(pdev, pcie);
> > > > > >
> > > > > >  	ret = ls_add_pcie_ep(pcie, pdev);
> > > > > > --
> > > > > > 2.9.5
> > > > > >

Patch
diff mbox series

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index 5f0cb99..723bbe5 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -20,27 +20,29 @@ 
 
 #define PCIE_DBI2_OFFSET		0x1000	/* DBI2 base address*/
 
-struct ls_pcie_ep {
-	struct dw_pcie		*pci;
-	struct pci_epc_features	*ls_epc;
+#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
+
+struct ls_pcie_ep_drvdata {
+	u32				func_offset;
+	const struct dw_pcie_ep_ops	*ops;
+	const struct dw_pcie_ops	*dw_pcie_ops;
 };
 
-#define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
+struct ls_pcie_ep {
+	struct dw_pcie			*pci;
+	struct pci_epc_features		*ls_epc;
+	const struct ls_pcie_ep_drvdata *drvdata;
+};
 
 static int ls_pcie_establish_link(struct dw_pcie *pci)
 {
 	return 0;
 }
 
-static const struct dw_pcie_ops ls_pcie_ep_ops = {
+static const struct dw_pcie_ops dw_ls_pcie_ep_ops = {
 	.start_link = ls_pcie_establish_link,
 };
 
-static const struct of_device_id ls_pcie_ep_of_match[] = {
-	{ .compatible = "fsl,ls-pcie-ep",},
-	{ },
-};
-
 static const struct pci_epc_features*
 ls_pcie_ep_get_features(struct dw_pcie_ep *ep)
 {
@@ -87,10 +89,39 @@  static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
 	}
 }
 
-static const struct dw_pcie_ep_ops pcie_ep_ops = {
+static unsigned int ls_pcie_ep_func_conf_select(struct dw_pcie_ep *ep,
+						u8 func_no)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct ls_pcie_ep *pcie = to_ls_pcie_ep(pci);
+
+	WARN_ON(func_no && !pcie->drvdata->func_offset);
+	return pcie->drvdata->func_offset * func_no;
+}
+
+static const struct dw_pcie_ep_ops ls_pcie_ep_ops = {
 	.ep_init = ls_pcie_ep_init,
 	.raise_irq = ls_pcie_ep_raise_irq,
 	.get_features = ls_pcie_ep_get_features,
+	.func_conf_select = ls_pcie_ep_func_conf_select,
+};
+
+static const struct ls_pcie_ep_drvdata ls1_ep_drvdata = {
+	.ops = &ls_pcie_ep_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
+};
+
+static const struct ls_pcie_ep_drvdata ls2_ep_drvdata = {
+	.func_offset = 0x20000,
+	.ops = &ls_pcie_ep_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ep_ops,
+};
+
+static const struct of_device_id ls_pcie_ep_of_match[] = {
+	{ .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata },
+	{ .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata },
+	{ .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata },
+	{ },
 };
 
 static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
@@ -103,7 +134,7 @@  static int __init ls_add_pcie_ep(struct ls_pcie_ep *pcie,
 	int ret;
 
 	ep = &pci->ep;
-	ep->ops = &pcie_ep_ops;
+	ep->ops = pcie->drvdata->ops;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
 	if (!res)
@@ -142,20 +173,23 @@  static int __init ls_pcie_ep_probe(struct platform_device *pdev)
 	if (!ls_epc)
 		return -ENOMEM;
 
-	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
-	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
-	if (IS_ERR(pci->dbi_base))
-		return PTR_ERR(pci->dbi_base);
+	pcie->drvdata = of_device_get_match_data(dev);
 
-	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
 	pci->dev = dev;
-	pci->ops = &ls_pcie_ep_ops;
-	pcie->pci = pci;
+	pci->ops = pcie->drvdata->dw_pcie_ops;
 
 	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
 
+	pcie->pci = pci;
 	pcie->ls_epc = ls_epc;
 
+	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
+	if (IS_ERR(pci->dbi_base))
+		return PTR_ERR(pci->dbi_base);
+
+	pci->dbi_base2 = pci->dbi_base + PCIE_DBI2_OFFSET;
+
 	platform_set_drvdata(pdev, pcie);
 
 	ret = ls_add_pcie_ep(pcie, pdev);