[4/5] dt-bindings: arm: idle-states: Add punctuation to improve readability
diff mbox series

Message ID 20190830150302.20551-5-geert+renesas@glider.be
State Accepted
Headers show
Series
  • dt-bindings: arm: idle-states: Miscellaneous improvements
Related show

Checks

Context Check Description
robh/checkpatch warning "total: 0 errors, 1 warnings, 20 lines checked"

Commit Message

Geert Uytterhoeven Aug. 30, 2019, 3:03 p.m. UTC
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 Documentation/devicetree/bindings/arm/idle-states.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Rob Herring Sept. 2, 2019, 2:55 p.m. UTC | #1
On Fri, 30 Aug 2019 17:03:01 +0200, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  Documentation/devicetree/bindings/arm/idle-states.txt | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 

Applied, thanks.

Rob

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt
index 4ef0de5c0c7f5990..eb9d725be7a93f4a 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.txt
+++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@@ -214,8 +214,8 @@  processor idle states, defined as device tree nodes, are listed.
 
 	Usage: Optional - On ARM systems, it is a container of processor idle
 			  states nodes. If the system does not provide CPU
-			  power management capabilities or the processor just
-			  supports idle_standby an idle-states node is not
+			  power management capabilities, or the processor just
+			  supports idle_standby, an idle-states node is not
 			  required.
 
 	Description: idle-states node is a container node, where its
@@ -342,8 +342,8 @@  follows:
 			    state.
 
 	In addition to the properties listed above, a state node may require
-	additional properties specifics to the entry-method defined in the
-	idle-states node, please refer to the entry-method bindings
+	additional properties specific to the entry-method defined in the
+	idle-states node. Please refer to the entry-method bindings
 	documentation for properties definitions.
 
 ===========================================