[U-Boot,V2,02/10] usb: r8a66597: Make CONFIG_RZA_USB default
diff mbox series

Message ID 20190822162214.19011-2-marek.vasut+renesas@gmail.com
State New
Delegated to: Marek Vasut
Headers show
Series
  • [U-Boot,V2,01/10] usb: r8a66597: Remove CONFIG_SUPERH_ON_CHIP_R8A66597
Related show

Commit Message

Marek Vasut Aug. 22, 2019, 4:22 p.m. UTC
No other platforms use this r8a66597 controller but RZ/A1,
make RZ/A1 support the default and drop all the other SoC
support to remove ifdeffery.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
---
V2: No change
---
 drivers/usb/host/r8a66597-hcd.c | 35 -----------------------------
 drivers/usb/host/r8a66597.h     | 39 ---------------------------------
 2 files changed, 74 deletions(-)

Patch
diff mbox series

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 8cca09f6d8..d144b57a61 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -70,20 +70,6 @@  static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 		}
 	} while ((tmp & USBE) != USBE);
 	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
-#if !defined(CONFIG_RZA_USB)
-	r8a66597_mdfy(r8a66597, CONFIG_R8A66597_XTAL, XTAL, SYSCFG0);
-
-	i = 0;
-	r8a66597_bset(r8a66597, XCKE, SYSCFG0);
-	do {
-		udelay(1000);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 500) {
-			printf("register access fail.\n");
-			return -1;
-		}
-	} while ((tmp & SCKE) != SCKE);
-#else
 	/*
 	 * RZ/A Only:
 	 * Bits XTAL(UCKSEL) and UPLLE in SYSCFG0 for USB0 controls both USB0
@@ -96,28 +82,18 @@  static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 	setbits(le16, R8A66597_BASE0, UPLLE);
 	mdelay(1);
 	r8a66597_bset(r8a66597, SUSPM, SUSPMODE0);
-#endif /* CONFIG_RZA_USB */
 
 	return 0;
 }
 
 static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
 {
-#if !defined(CONFIG_RZA_USB)
-	r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
-	udelay(1);
-	r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
-	r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
-	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
-#else
 	r8a66597_bclr(r8a66597, SUSPM, SUSPMODE0);
 
 	clrbits(le16, R8A66597_BASE0, UPLLE);
 	mdelay(1);
 	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
 	mdelay(1);
-
-#endif
 }
 
 static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
@@ -127,10 +103,6 @@  static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
 	val = port ? DRPD : DCFM | DRPD;
 	r8a66597_bset(r8a66597, val, get_syscfg_reg(port));
 	r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
-
-#if !defined(CONFIG_RZA_USB)
-	r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, get_dmacfg_reg(port));
-#endif
 }
 
 static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
@@ -160,9 +132,6 @@  static int enable_controller(struct r8a66597 *r8a66597)
 	if (ret < 0)
 		return ret;
 
-#if !defined(CONFIG_RZA_USB)
-	r8a66597_bset(r8a66597, CONFIG_R8A66597_LDRV & LDRV, PINCFG);
-#endif
 	r8a66597_bset(r8a66597, USBE, SYSCFG0);
 
 	r8a66597_bset(r8a66597, INTL, SOFCFG);
@@ -280,16 +249,13 @@  static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
 	unsigned long setup_addr = USBREQ;
 	u16 intsts1;
 	int timeout = 3000;
-#if defined(CONFIG_RZA_USB)
 	u16 dcpctr;
-#endif
 	u16 devsel = setup->request == USB_REQ_SET_ADDRESS ? 0 : dev->devnum;
 
 	r8a66597_write(r8a66597, make_devsel(devsel) |
 				 (8 << dev->maxpacketsize), DCPMAXP);
 	r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
 
-#if defined(CONFIG_RZA_USB)
 	dcpctr = r8a66597_read(r8a66597, DCPCTR);
 	if ((dcpctr & PID) == PID_BUF) {
 		if (readw_poll_timeout(r8a66597->reg + DCPCTR, dcpctr,
@@ -298,7 +264,6 @@  static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
 			return -ETIMEDOUT;
 		}
 	}
-#endif
 
 	for (i = 0; i < 4; i++) {
 		r8a66597_write(r8a66597, le16_to_cpu(p[i]), setup_addr);
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 4859e26355..1e370cdd6c 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -89,27 +89,14 @@ 
 #define SUSPMODE0	0x102	/* RZ/A only */
 
 /* System Configuration Control Register */
-#if !defined(CONFIG_RZA_USB)
-#define	XTAL		0xC000	/* b15-14: Crystal selection */
-#define	  XTAL48	 0x8000	  /* 48MHz */
-#define	  XTAL24	 0x4000	  /* 24MHz */
-#define	  XTAL12	 0x0000	  /* 12MHz */
-#define	XCKE		0x2000	/* b13: External clock enable */
-#define	PLLC		0x0800	/* b11: PLL control */
-#define	SCKE		0x0400	/* b10: USB clock enable */
-#define	PCSDIS		0x0200	/* b9: not CS wakeup */
-#define	LPSME		0x0100	/* b8: Low power sleep mode */
-#endif
 #define	HSE		0x0080	/* b7: Hi-speed enable */
 #define	DCFM		0x0040	/* b6: Controller function select  */
 #define	DRPD		0x0020	/* b5: D+/- pull down control */
 #define	DPRPU		0x0010	/* b4: D+ pull up control */
-#if defined(CONFIG_RZA_USB)
 #define	XTAL		0x0004	/* b2: Crystal selection */
 #define	  XTAL12	 0x0004	  /* 12MHz */
 #define	  XTAL48	 0x0000	  /* 48MHz */
 #define	UPLLE		0x0002	/* b1: internal PLL control */
-#endif
 #define	USBE		0x0001	/* b0: USB module operation enable */
 
 /* System Configuration Status Register */
@@ -178,11 +165,7 @@ 
 #define	REW		0x4000	/* b14: Buffer rewind */
 #define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
 #define	DREQE		0x1000	/* b12: DREQ output enable */
-#if !defined(CONFIG_RZA_USB)
-#define	MBW		0x0400	/* b10: Maximum bit width for FIFO access */
-#else
 #define	MBW		0x0800	/* b10: Maximum bit width for FIFO access */
-#endif
 #define	  MBW_8		 0x0000	  /*  8bit */
 #define	  MBW_16	 0x0400	  /* 16bit */
 #define	  MBW_32	 0x0800   /* 32bit */
@@ -427,7 +410,6 @@  static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 				      int len)
 {
 	int i;
-#if defined(CONFIG_RZA_USB)
 	unsigned long fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 	unsigned long *p = buf;
@@ -440,13 +422,6 @@  static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 		unsigned long tmp = inl(fifoaddr);
 		memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
 	}
-#else
-	unsigned short *p = buf;
-
-	len = (len + 1) / 2;
-	for (i = 0; i < len; i++)
-		p[i] = inw(r8a66597->reg + offset);
-#endif
 }
 
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
@@ -461,7 +436,6 @@  static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 {
 	int i;
 	unsigned long fifoaddr = r8a66597->reg + offset;
-#if defined(CONFIG_RZA_USB)
 	unsigned long count;
 	unsigned char *pb;
 	unsigned long *p = buf;
@@ -479,19 +453,6 @@  static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 				outb(pb[i], fifoaddr + 3 - i);
 		}
 	}
-#else
-	int odd = len & 0x0001;
-	unsigned short *p = buf;
-
-	len = len / 2;
-	for (i = 0; i < len; i++)
-		outw(p[i], fifoaddr);
-
-	if (odd) {
-		unsigned char *pb = (unsigned char *)(buf + len);
-		outb(*pb, fifoaddr);
-	}
-#endif
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,