@@ -560,7 +560,7 @@ header and skipping every second 2KB block. Then the U-Boot image is written at
offset 128KB and the whole image is padded to 4MB which is the SPI flash size.
The position of U-Boot is controlled with this setting in U-Boot:
- #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
If you have a Dediprog em100pro connected then you can write the image with:
@@ -17,7 +17,7 @@
#define CONFIG_MACH_TYPE 4122
#ifdef CONFIG_SPL
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#include "imx6_spl.h"
#endif
@@ -167,7 +167,7 @@
/* SPL */
#include "imx7_spl.h"
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#endif /* CONFIG_SPL_BUILD */
#endif /* __CONFIG_H */
@@ -207,7 +207,7 @@
/* SPL */
#include "imx6_spl.h"
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
/* Display */
#define CONFIG_IMX_HDMI
@@ -115,7 +115,7 @@
/* SPL defines. */
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20))
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
/* EEPROM */
@@ -20,7 +20,7 @@
#define CONFIG_MXC_UART
#ifdef CONFIG_SPL
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#include "imx6_spl.h"
#endif
@@ -59,7 +59,7 @@
/* SPL */
#ifdef CONFIG_SPL
#include "imx6_spl.h"
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#endif
#define CONFIG_FEC_MXC
@@ -8,7 +8,7 @@
#define __PCM058_CONFIG_H
#ifdef CONFIG_SPL
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#include "imx6_spl.h"
#endif
@@ -8,7 +8,7 @@
#define __PCM058_CONFIG_H
#ifdef CONFIG_SPL
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#include "imx6_spl.h"
#endif
@@ -27,7 +27,7 @@
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
/* RAW SD card / eMMC locations. */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_SDRAM_BASE 0x60000000
@@ -30,7 +30,7 @@
#define CONFIG_IRAM_BASE 0xff700000
/* RAW SD card / eMMC locations. */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
/* FAT sd card locations. */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
@@ -25,7 +25,7 @@
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
/* FAT sd card locations. */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
@@ -39,7 +39,7 @@
#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
/* RAW SD card / eMMC locations. */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
/* FAT sd card locations. */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
Some boards have coded this offset with formula or bitshifts in their board-config. Manually convert these things into hex-values to be able using moveconfig.py afterwards. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> --- doc/README.rockchip | 2 +- include/configs/cgtqmx6eval.h | 2 +- include/configs/cl-som-imx7.h | 2 +- include/configs/cm_fx6.h | 2 +- include/configs/cm_t43.h | 2 +- include/configs/el6x_common.h | 2 +- include/configs/ot1200.h | 2 +- include/configs/pcm058.h | 2 +- include/configs/pfla02.h | 2 +- include/configs/rk3128_common.h | 2 +- include/configs/rk3288_common.h | 2 +- include/configs/rk3328_common.h | 2 +- include/configs/rk3399_common.h | 2 +- 13 files changed, 13 insertions(+), 13 deletions(-)