[V4,1/4] dt-bindings: watchdog: Add i.MX7ULP bindings

Add the watchdog bindings for Freescale i.MX7ULP.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No changes.
---
 .../bindings/watchdog/fsl-imx7ulp-wdt.txt          | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt

On Wed, Aug 21, 2019 at 10:37:40PM -0400, Anson Huang wrote:
> Add the watchdog bindings for Freescale i.MX7ULP.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> No changes.
> ---
>  .../bindings/watchdog/fsl-imx7ulp-wdt.txt          | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
> new file mode 100644
> index 0000000..d83fc5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
> @@ -0,0 +1,22 @@
> +* Freescale i.MX7ULP Watchdog Timer (WDT) Controller
> +
> +Required properties:
> +- compatible : Should be "fsl,imx7ulp-wdt"
> +- reg : Should contain WDT registers location and length
> +- interrupts : Should contain WDT interrupt
> +- clocks: Should contain a phandle pointing to the gated peripheral clock.
> +
> +Optional properties:
> +- timeout-sec : Contains the watchdog timeout in seconds
> +
> +Examples:
> +
> +wdog1: wdog@403d0000 {

watchdog@...

With that,

Reviewed-by: Rob Herring <rohb@kernel.org>

> +	compatible = "fsl,imx7ulp-wdt";
> +	reg = <0x403d0000 0x10000>;
> +	interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> +	clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
> +	assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
> +	assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
> +	timeout-sec = <40>;
> +};
> -- 
> 2.7.4
>

On Wed, Aug 21, 2019 at 10:37:41PM -0400, Anson Huang wrote:
> The i.MX7ULP Watchdog Timer (WDOG) module is an independent timer
> that is available for system use.
> It provides a safety feature to ensure that software is executing
> as planned and that the CPU is not stuck in an infinite loop or
> executing unintended code. If the WDOG module is not serviced
> (refreshed) within a certain period, it resets the MCU.
> 
> Add driver support for i.MX7ULP watchdog.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> Changes since V3:
> 	- pass clk directly for reset action to avoid dereference from structure;
> 	- use constant instead of variable for wdog clock rate, as it is fixed as 1KHz.
> ---
>  drivers/watchdog/Kconfig       |  13 +++
>  drivers/watchdog/Makefile      |   1 +
>  drivers/watchdog/imx7ulp_wdt.c | 243 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 257 insertions(+)
>  create mode 100644 drivers/watchdog/imx7ulp_wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index a8f5c81..d68e5b5 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -724,6 +724,19 @@ config IMX_SC_WDT
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called imx_sc_wdt.
>  
> +config IMX7ULP_WDT
> +	tristate "IMX7ULP Watchdog"
> +	depends on ARCH_MXC || COMPILE_TEST
> +	select WATCHDOG_CORE
> +	help
> +	  This is the driver for the hardware watchdog on the Freescale
> +	  IMX7ULP and later processors. If you have one of these
> +	  processors and wish to have watchdog support enabled,
> +	  say Y, otherwise say N.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called imx7ulp_wdt.
> +
>  config UX500_WATCHDOG
>  	tristate "ST-Ericsson Ux500 watchdog"
>  	depends on MFD_DB8500_PRCMU
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index b5a0aed..2ee352b 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -67,6 +67,7 @@ obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
>  obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
>  obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
>  obj-$(CONFIG_IMX_SC_WDT) += imx_sc_wdt.o
> +obj-$(CONFIG_IMX7ULP_WDT) += imx7ulp_wdt.o
>  obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
>  obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
>  obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
> diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
> new file mode 100644
> index 0000000..5ce5102
> --- /dev/null
> +++ b/drivers/watchdog/imx7ulp_wdt.c
> @@ -0,0 +1,243 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2019 NXP.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/watchdog.h>
> +
> +#define WDOG_CS			0x0
> +#define WDOG_CS_CMD32EN		BIT(13)
> +#define WDOG_CS_ULK		BIT(11)
> +#define WDOG_CS_RCS		BIT(10)
> +#define WDOG_CS_EN		BIT(7)
> +#define WDOG_CS_UPDATE		BIT(5)
> +
> +#define WDOG_CNT	0x4
> +#define WDOG_TOVAL	0x8
> +
> +#define REFRESH_SEQ0	0xA602
> +#define REFRESH_SEQ1	0xB480
> +#define REFRESH		((REFRESH_SEQ1 << 16) | REFRESH_SEQ0)
> +
> +#define UNLOCK_SEQ0	0xC520
> +#define UNLOCK_SEQ1	0xD928
> +#define UNLOCK		((UNLOCK_SEQ1 << 16) | UNLOCK_SEQ0)
> +
> +#define DEFAULT_TIMEOUT	60
> +#define MAX_TIMEOUT	128
> +#define WDOG_CLOCK_RATE	1000
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0000);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +struct imx7ulp_wdt_device {
> +	struct notifier_block restart_handler;
> +	struct watchdog_device wdd;
> +	void __iomem *base;
> +	struct clk *clk;
> +};
> +
> +static inline void imx7ulp_wdt_enable(void __iomem *base, bool enable)
> +{
> +	u32 val = readl(base + WDOG_CS);
> +
> +	writel(UNLOCK, base + WDOG_CNT);
> +	if (enable)
> +		writel(val | WDOG_CS_EN, base + WDOG_CS);
> +	else
> +		writel(val & ~WDOG_CS_EN, base + WDOG_CS);
> +}
> +
> +static inline bool imx7ulp_wdt_is_enabled(void __iomem *base)
> +{
> +	u32 val = readl(base + WDOG_CS);
> +
> +	return val & WDOG_CS_EN;
> +}
> +
> +static int imx7ulp_wdt_ping(struct watchdog_device *wdog)
> +{
> +	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
> +
> +	writel(REFRESH, wdt->base + WDOG_CNT);
> +
> +	return 0;
> +}
> +
> +static int imx7ulp_wdt_start(struct watchdog_device *wdog)
> +{
> +	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
> +
> +	imx7ulp_wdt_enable(wdt->base, true);
> +
> +	return 0;
> +}
> +
> +static int imx7ulp_wdt_stop(struct watchdog_device *wdog)
> +{
> +	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
> +
> +	imx7ulp_wdt_enable(wdt->base, false);
> +
> +	return 0;
> +}
> +
> +static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
> +				   unsigned int timeout)
> +{
> +	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
> +	u32 val = WDOG_CLOCK_RATE * timeout;
> +
> +	writel(UNLOCK, wdt->base + WDOG_CNT);
> +	writel(val, wdt->base + WDOG_TOVAL);
> +
> +	wdog->timeout = timeout;
> +
> +	return 0;
> +}
> +
> +static const struct watchdog_ops imx7ulp_wdt_ops = {
> +	.owner = THIS_MODULE,
> +	.start = imx7ulp_wdt_start,
> +	.stop  = imx7ulp_wdt_stop,
> +	.ping  = imx7ulp_wdt_ping,
> +	.set_timeout = imx7ulp_wdt_set_timeout,
> +};
> +
> +static const struct watchdog_info imx7ulp_wdt_info = {
> +	.identity = "i.MX7ULP watchdog timer",
> +	.options  = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> +		    WDIOF_MAGICCLOSE,
> +};
> +
> +static inline void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
> +{
> +	u32 val;
> +
> +	/* unlock the wdog for reconfiguration */
> +	writel_relaxed(UNLOCK_SEQ0, base + WDOG_CNT);
> +	writel_relaxed(UNLOCK_SEQ1, base + WDOG_CNT);
> +
> +	/* set an initial timeout value in TOVAL */
> +	writel(timeout, base + WDOG_TOVAL);
> +	/* enable 32bit command sequence and reconfigure */
> +	val = BIT(13) | BIT(8) | BIT(5);
> +	writel(val, base + WDOG_CS);
> +}
> +
> +static void imx7ulp_wdt_action(void *data)
> +{
> +	clk_disable_unprepare(data);
> +}
> +
> +static int imx7ulp_wdt_probe(struct platform_device *pdev)
> +{
> +	struct imx7ulp_wdt_device *imx7ulp_wdt;
> +	struct device *dev = &pdev->dev;
> +	struct watchdog_device *wdog;
> +	int ret;
> +
> +	imx7ulp_wdt = devm_kzalloc(dev, sizeof(*imx7ulp_wdt), GFP_KERNEL);
> +	if (!imx7ulp_wdt)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, imx7ulp_wdt);
> +
> +	imx7ulp_wdt->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(imx7ulp_wdt->base))
> +		return PTR_ERR(imx7ulp_wdt->base);
> +
> +	imx7ulp_wdt->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(imx7ulp_wdt->clk)) {
> +		dev_err(dev, "Failed to get watchdog clock\n");
> +		return PTR_ERR(imx7ulp_wdt->clk);
> +	}
> +
> +	ret = clk_prepare_enable(imx7ulp_wdt->clk);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_add_action_or_reset(dev, imx7ulp_wdt_action, imx7ulp_wdt->clk);
> +	if (ret)
> +		return ret;
> +
> +	wdog = &imx7ulp_wdt->wdd;
> +	wdog->info = &imx7ulp_wdt_info;
> +	wdog->ops = &imx7ulp_wdt_ops;
> +	wdog->min_timeout = 1;
> +	wdog->max_timeout = MAX_TIMEOUT;
> +	wdog->parent = dev;
> +	wdog->timeout = DEFAULT_TIMEOUT;
> +
> +	watchdog_init_timeout(wdog, 0, dev);
> +	watchdog_stop_on_reboot(wdog);
> +	watchdog_stop_on_unregister(wdog);
> +	watchdog_set_drvdata(wdog, imx7ulp_wdt);
> +	imx7ulp_wdt_init(imx7ulp_wdt->base, wdog->timeout * WDOG_CLOCK_RATE);
> +
> +	return devm_watchdog_register_device(dev, wdog);
> +}
> +
> +static int __maybe_unused imx7ulp_wdt_suspend(struct device *dev)
> +{
> +	struct imx7ulp_wdt_device *imx7ulp_wdt = dev_get_drvdata(dev);
> +
> +	if (watchdog_active(&imx7ulp_wdt->wdd))
> +		imx7ulp_wdt_stop(&imx7ulp_wdt->wdd);
> +
> +	clk_disable_unprepare(imx7ulp_wdt->clk);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused imx7ulp_wdt_resume(struct device *dev)
> +{
> +	struct imx7ulp_wdt_device *imx7ulp_wdt = dev_get_drvdata(dev);
> +	u32 timeout = imx7ulp_wdt->wdd.timeout * WDOG_CLOCK_RATE;
> +	int ret;
> +
> +	ret = clk_prepare_enable(imx7ulp_wdt->clk);
> +	if (ret)
> +		return ret;
> +
> +	if (imx7ulp_wdt_is_enabled(imx7ulp_wdt->base))
> +		imx7ulp_wdt_init(imx7ulp_wdt->base, timeout);
> +
> +	if (watchdog_active(&imx7ulp_wdt->wdd))
> +		imx7ulp_wdt_start(&imx7ulp_wdt->wdd);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(imx7ulp_wdt_pm_ops, imx7ulp_wdt_suspend,
> +			 imx7ulp_wdt_resume);
> +
> +static const struct of_device_id imx7ulp_wdt_dt_ids[] = {
> +	{ .compatible = "fsl,imx7ulp-wdt", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx7ulp_wdt_dt_ids);
> +
> +static struct platform_driver imx7ulp_wdt_driver = {
> +	.probe		= imx7ulp_wdt_probe,
> +	.driver		= {
> +		.name	= "imx7ulp-wdt",
> +		.pm	= &imx7ulp_wdt_pm_ops,
> +		.of_match_table = imx7ulp_wdt_dt_ids,
> +	},
> +};
> +module_platform_driver(imx7ulp_wdt_driver);
> +
> +MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
> +MODULE_DESCRIPTION("Freescale i.MX7ULP watchdog driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.7.4
>

On Wed, Aug 21, 2019 at 10:37:40PM -0400, Anson Huang wrote:
> Add the watchdog bindings for Freescale i.MX7ULP.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

With the change requested by Rob:

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> No changes.
> ---
>  .../bindings/watchdog/fsl-imx7ulp-wdt.txt          | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
> new file mode 100644
> index 0000000..d83fc5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
> @@ -0,0 +1,22 @@
> +* Freescale i.MX7ULP Watchdog Timer (WDT) Controller
> +
> +Required properties:
> +- compatible : Should be "fsl,imx7ulp-wdt"
> +- reg : Should contain WDT registers location and length
> +- interrupts : Should contain WDT interrupt
> +- clocks: Should contain a phandle pointing to the gated peripheral clock.
> +
> +Optional properties:
> +- timeout-sec : Contains the watchdog timeout in seconds
> +
> +Examples:
> +
> +wdog1: wdog@403d0000 {
> +	compatible = "fsl,imx7ulp-wdt";
> +	reg = <0x403d0000 0x10000>;
> +	interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> +	clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
> +	assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
> +	assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
> +	timeout-sec = <40>;
> +};
> -- 
> 2.7.4
>

On Wed, Aug 21, 2019 at 10:37:42PM -0400, Anson Huang wrote:
> Select CONFIG_IMX7ULP_WDT by default to support i.MX7ULP watchdog.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Patch #4 and #5 look good to me, and I will pick them up once the first
3 get applied by Guenter.

Shawn