| Message ID | 20190821055530.8720-8-joel@jms.id.au |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | ARM: Add ASPEED AST2600 support | expand |
On Wed, 21 Aug 2019, at 15:26, Joel Stanley wrote: > CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7. > > Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without > hihgmem. > > The SoC contains Cortex A7 supporting VFP and has two CPUs. > > Signed-off-by: Joel Stanley <joel@jms.id.au> > --- > arch/arm/configs/aspeed_g5_defconfig | 17 ++++++++++++++--- > 1 file changed, 14 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/configs/aspeed_g5_defconfig > b/arch/arm/configs/aspeed_g5_defconfig > index 426d8e0c9890..597536cc9573 100644 > --- a/arch/arm/configs/aspeed_g5_defconfig > +++ b/arch/arm/configs/aspeed_g5_defconfig > @@ -21,21 +21,26 @@ CONFIG_PERF_EVENTS=y > CONFIG_SLAB=y > CONFIG_SLAB_FREELIST_RANDOM=y > CONFIG_ARCH_MULTI_V6=y > -# CONFIG_ARCH_MULTI_V7 is not set > CONFIG_ARCH_ASPEED=y > CONFIG_MACH_ASPEED_G5=y > +CONFIG_MACH_ASPEED_G6=y > # CONFIG_CACHE_L2X0 is not set > +CONFIG_SMP=y > +# CONFIG_ARM_CPU_TOPOLOGY is not set > CONFIG_VMSPLIT_2G=y > +CONFIG_NR_CPUS=2 > +CONFIG_HIGHMEM=y > CONFIG_UACCESS_WITH_MEMCPY=y > CONFIG_SECCOMP=y > # CONFIG_ATAGS is not set > CONFIG_ZBOOT_ROM_TEXT=0x0 > CONFIG_ZBOOT_ROM_BSS=0x0 > CONFIG_KEXEC=y > -# CONFIG_SUSPEND is not set > +CONFIG_VFP=y > +CONFIG_NEON=y > +CONFIG_KERNEL_MODE_NEON=y > CONFIG_FIRMWARE_MEMMAP=y > CONFIG_JUMP_LABEL=y > -CONFIG_STRICT_KERNEL_RWX=y > # CONFIG_BLK_DEV_BSG is not set > # CONFIG_BLK_DEBUG_FS is not set > # CONFIG_MQ_IOSCHED_DEADLINE is not set > @@ -140,10 +145,12 @@ CONFIG_ASPEED_BT_IPMI_BMC=y > CONFIG_HW_RANDOM_TIMERIOMEM=y > # CONFIG_I2C_COMPAT is not set > CONFIG_I2C_CHARDEV=y > +CONFIG_I2C_MUX=y > CONFIG_I2C_MUX_PCA9541=y > CONFIG_I2C_MUX_PCA954x=y > CONFIG_I2C_ASPEED=y > CONFIG_I2C_FSI=y > +CONFIG_SPI=y > CONFIG_GPIOLIB=y > CONFIG_GPIO_SYSFS=y > CONFIG_GPIO_ASPEED=y > @@ -194,6 +201,10 @@ CONFIG_USB_CONFIGFS_F_LB_SS=y > CONFIG_USB_CONFIGFS_F_FS=y > CONFIG_USB_CONFIGFS_F_HID=y > CONFIG_USB_CONFIGFS_F_PRINTER=y > +CONFIG_MMC=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_PLTFM=y > +CONFIG_MMC_SDHCI_OF_ASPEED=y The patches haven't yet been applied to the MMC tree, maybe we should add this later? Anyway, Acked-by: Andrew Jeffery <andrew@aj.id.au>
On Thu, 22 Aug 2019 at 02:07, Andrew Jeffery <andrew@aj.id.au> wrote: > > +CONFIG_MMC=y > > +CONFIG_MMC_SDHCI=y > > +CONFIG_MMC_SDHCI_PLTFM=y > > +CONFIG_MMC_SDHCI_OF_ASPEED=y > > The patches haven't yet been applied to the MMC tree, maybe we should > add this later? When enabling drivers in the same merge window as they go into the tree we will always be in this situation. If the driver doesn't make it in this merge window, or first has has changes, the worst that will happen is the kconfig name changes and I need to update it later. I think we're safe to include it as-is. Thanks for the review. Cheers, Joel
On Thu, Aug 22, 2019 at 6:43 AM Joel Stanley <joel@jms.id.au> wrote: > > On Thu, 22 Aug 2019 at 02:07, Andrew Jeffery <andrew@aj.id.au> wrote: > > > +CONFIG_MMC=y > > > +CONFIG_MMC_SDHCI=y > > > +CONFIG_MMC_SDHCI_PLTFM=y > > > +CONFIG_MMC_SDHCI_OF_ASPEED=y > > > > The patches haven't yet been applied to the MMC tree, maybe we should > > add this later? > > When enabling drivers in the same merge window as they go into the > tree we will always be in this situation. > > If the driver doesn't make it in this merge window, or first has has > changes, the worst that will happen is the kconfig name changes and I > need to update it later. I think we're safe to include it as-is. Yes, that's fine. Please also enable all the drivers you need in multi_v7_defconfig now, preferably as loadable modules. Arnd
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 426d8e0c9890..597536cc9573 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -21,21 +21,26 @@ CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_SLAB_FREELIST_RANDOM=y CONFIG_ARCH_MULTI_V6=y -# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G5=y +CONFIG_MACH_ASPEED_G6=y # CONFIG_CACHE_L2X0 is not set +CONFIG_SMP=y +# CONFIG_ARM_CPU_TOPOLOGY is not set CONFIG_VMSPLIT_2G=y +CONFIG_NR_CPUS=2 +CONFIG_HIGHMEM=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_SECCOMP=y # CONFIG_ATAGS is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_KEXEC=y -# CONFIG_SUSPEND is not set +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y CONFIG_FIRMWARE_MEMMAP=y CONFIG_JUMP_LABEL=y -CONFIG_STRICT_KERNEL_RWX=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_MQ_IOSCHED_DEADLINE is not set @@ -140,10 +145,12 @@ CONFIG_ASPEED_BT_IPMI_BMC=y CONFIG_HW_RANDOM_TIMERIOMEM=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_ASPEED=y CONFIG_I2C_FSI=y +CONFIG_SPI=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y @@ -194,6 +201,10 @@ CONFIG_USB_CONFIGFS_F_LB_SS=y CONFIG_USB_CONFIGFS_F_FS=y CONFIG_USB_CONFIGFS_F_HID=y CONFIG_USB_CONFIGFS_F_PRINTER=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ASPEED=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y
CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7. Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without hihgmem. The SoC contains Cortex A7 supporting VFP and has two CPUs. Signed-off-by: Joel Stanley <joel@jms.id.au> --- arch/arm/configs/aspeed_g5_defconfig | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)