[2/7] ARM: aspeed: Select timer in each SoC
diff mbox series

Message ID 20190821055530.8720-3-joel@jms.id.au
State Accepted, archived
Headers show
Series
  • ARM: Add ASPEED AST2600 support
Related show

Commit Message

Joel Stanley Aug. 21, 2019, 5:55 a.m. UTC
In preparation for adding the ast2600 which does not use this timer.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/mach-aspeed/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Andrew Jeffery Aug. 22, 2019, 1:27 a.m. UTC | #1
On Wed, 21 Aug 2019, at 15:26, Joel Stanley wrote:
> In preparation for adding the ast2600 which does not use this timer.
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>

> ---
>  arch/arm/mach-aspeed/Kconfig | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
> index a15c3a291386..2979aa4daeea 100644
> --- a/arch/arm/mach-aspeed/Kconfig
> +++ b/arch/arm/mach-aspeed/Kconfig
> @@ -5,7 +5,6 @@ menuconfig ARCH_ASPEED
>  	select SRAM
>  	select WATCHDOG
>  	select ASPEED_WATCHDOG
> -	select FTTMR010_TIMER
>  	select MFD_SYSCON
>  	select PINCTRL
>  	help
> @@ -18,6 +17,7 @@ config MACH_ASPEED_G4
>  	depends on ARCH_MULTI_V5
>  	select CPU_ARM926T
>  	select PINCTRL_ASPEED_G4
> +	select FTTMR010_TIMER
>  	help
>  	 Say yes if you intend to run on an Aspeed ast2400 or similar
>  	 fourth generation BMCs, such as those used by OpenPower Power8
> @@ -28,6 +28,7 @@ config MACH_ASPEED_G5
>  	depends on ARCH_MULTI_V6
>  	select CPU_V6
>  	select PINCTRL_ASPEED_G5
> +	select FTTMR010_TIMER
>  	help
>  	 Say yes if you intend to run on an Aspeed ast2500 or similar
>  	 fifth generation Aspeed BMCs.
> -- 
> 2.23.0.rc1
> 
>

Patch
diff mbox series

diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index a15c3a291386..2979aa4daeea 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -5,7 +5,6 @@  menuconfig ARCH_ASPEED
 	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
-	select FTTMR010_TIMER
 	select MFD_SYSCON
 	select PINCTRL
 	help
@@ -18,6 +17,7 @@  config MACH_ASPEED_G4
 	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
 	select PINCTRL_ASPEED_G4
+	select FTTMR010_TIMER
 	help
 	 Say yes if you intend to run on an Aspeed ast2400 or similar
 	 fourth generation BMCs, such as those used by OpenPower Power8
@@ -28,6 +28,7 @@  config MACH_ASPEED_G5
 	depends on ARCH_MULTI_V6
 	select CPU_V6
 	select PINCTRL_ASPEED_G5
+	select FTTMR010_TIMER
 	help
 	 Say yes if you intend to run on an Aspeed ast2500 or similar
 	 fifth generation Aspeed BMCs.