[net-next,v3,04/14] ice: fix set pause param autoneg check
diff mbox series

Message ID 20190820085237.35579-1-anthony.l.nguyen@intel.com
State Accepted
Delegated to: Jeff Kirsher
Headers show
Series
  • Untitled series #126297
Related show

Commit Message

Tony Nguyen Aug. 20, 2019, 8:52 a.m. UTC
From: Paul Greenwalt <paul.greenwalt@intel.com>

When ETHTOOL_GLINKSETTINGS is defined get pause param pause->autoneg
reports SW configured setting, however when not defined get pause param
pause->autoneg reports the link status. Set pause param needs to compare
pause->autoneg with the same source as get pause param to block the user
from changing autoneg with the set pause param option, or the user
may be incorrectly blocked from changing Rx|Tx pause settings.

Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 27 +++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)
---
v3:
 - Use kzalloc/kfree instead of devm_kzalloc/devm_kzfree

Patch
diff mbox series

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 1fe048cfb737..0099cfb21860 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2856,6 +2856,7 @@  static int
 ice_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
 {
 	struct ice_netdev_priv *np = netdev_priv(netdev);
+	struct ice_aqc_get_phy_caps_data *pcaps;
 	struct ice_link_status *hw_link_info;
 	struct ice_pf *pf = np->vsi->back;
 	struct ice_dcbx_cfg *dcbx_cfg;
@@ -2866,6 +2867,7 @@  ice_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
 	u8 aq_failures;
 	bool link_up;
 	int err = 0;
+	u32 is_an;
 
 	pi = vsi->port_info;
 	hw_link_info = &pi->phy.link_info;
@@ -2880,7 +2882,30 @@  ice_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
 		return -EOPNOTSUPP;
 	}
 
-	if (pause->autoneg != (hw_link_info->an_info & ICE_AQ_AN_COMPLETED)) {
+	/* Get pause param reports configured and negotiated flow control pause
+	 * when ETHTOOL_GLINKSETTINGS is defined. Since ETHTOOL_GLINKSETTINGS is
+	 * defined get pause param pause->autoneg reports SW configured setting,
+	 * so compare pause->autoneg with SW configured to prevent the user from
+	 * using set pause param to chance autoneg.
+	 */
+	pcaps = kzalloc(sizeof(*pcaps), GFP_KERNEL);
+	if (!pcaps)
+		return -ENOMEM;
+
+	/* Get current PHY config */
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG, pcaps,
+				     NULL);
+	if (status) {
+		kfree(pcaps);
+		return -EIO;
+	}
+
+	is_an = ((pcaps->caps & ICE_AQC_PHY_AN_MODE) ?
+			AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+	kfree(pcaps);
+
+	if (pause->autoneg != is_an) {
 		netdev_info(netdev, "To change autoneg please use: ethtool -s <dev> autoneg <on|off>\n");
 		return -EOPNOTSUPP;
 	}