[v2,2/3] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller
diff mbox series

Message ID 5e6ee1245ee53a7726103a8de7c11a37ad99fbd6.1566208109.git.eswara.kota@linux.intel.com
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series
  • PCI: Add map irq callback in dwc framework and add Intel PCIe driver
Related show

Commit Message

Dilip Kota Aug. 20, 2019, 9:39 a.m. UTC
The Intel PCIe RC controller is Synopsys Designware
based PCIe core. Add YAML schemas for PCIe in RC mode
present in Intel Universal Gateway soc.

Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
---
 .../devicetree/bindings/pci/intel-pcie.yaml        | 133 +++++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/intel-pcie.yaml

Comments

Rob Herring Aug. 20, 2019, 1:42 p.m. UTC | #1
On Tue, Aug 20, 2019 at 4:40 AM Dilip Kota <eswara.kota@linux.intel.com> wrote:
>
> The Intel PCIe RC controller is Synopsys Designware
> based PCIe core. Add YAML schemas for PCIe in RC mode
> present in Intel Universal Gateway soc.

Run 'make dt_binding_check' and fix all the warnings.

>
> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
> ---
>  .../devicetree/bindings/pci/intel-pcie.yaml        | 133 +++++++++++++++++++++
>  1 file changed, 133 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/intel-pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/intel-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
> new file mode 100644
> index 000000000000..80caaaba5e2c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: GPL-2.0

(GPL-2.0-only OR BSD-2-Clause) is preferred for new bindings.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/intel-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intel AXI bus based PCI express root complex
> +
> +maintainers:
> +  - Dilip Kota <eswara.kota@linux.intel.com>
> +
> +properties:
> +  compatible:
> +    const: intel,lgm-pcie
> +
> +  device_type:
> +    const: pci
> +
> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  reg:
> +    items:
> +      - description: Controller control and status registers.
> +      - description: PCIe configuration registers.
> +      - description: Controller application registers.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: config
> +      - const: app
> +
> +  ranges:
> +    description: Ranges for the PCI memory and I/O regions.
> +
> +  resets:
> +    maxItems: 1
> +
> +  clocks:
> +    description: PCIe registers interface clock.
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: phy
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  num-lanes:
> +    description: Number of lanes to use for this port.
> +
> +  linux,pci-domain:
> +    description: PCI domain ID.
> +
> +  interrupts:
> +    description: PCIe core integrated miscellaneous interrupt.
> +
> +  interrupt-map-mask:
> +    description: Standard PCI IRQ mapping properties.
> +
> +  interrupt-map:
> +    description: Standard PCI IRQ mapping properties.
> +
> +  max-link-speed:
> +    description: Specify PCI Gen for link capability.
> +
> +  bus-range:
> +    description: Range of bus numbers associated with this controller.
> +
> +  intel,rst-interval:

Use 'reset-assert-us'

> +    description: |
> +      Device reset interval in ms. Some devices need an interval upto 500ms.
> +      By default it is 100ms.
> +
> +required:
> +  - compatible
> +  - device_type
> +  - reg
> +  - reg-names
> +  - ranges
> +  - resets
> +  - clocks
> +  - phys
> +  - phy-names
> +  - reset-gpios
> +  - num-lanes
> +  - linux,pci-domain
> +  - interrupts
> +  - interrupt-map
> +  - interrupt-map-mask
> +
> +examples:
> +  - |
> +    pcie10:pcie@d0e00000 {
> +      compatible = "intel,lgm-pcie";
> +      device_type = "pci";
> +      #address-cells = <3>;
> +      #size-cells = <2>;
> +      reg = <
> +            0xd0e00000 0x1000
> +            0xd2000000 0x800000
> +            0xd0a41000 0x1000
> +            >;
> +      reg-names = "dbi", "config", "app";
> +      linux,pci-domain = <0>;
> +      max-link-speed = <4>;
> +      bus-range = <0x00 0x08>;
> +      interrupt-parent = <&ioapic1>;
> +      interrupts = <67 1>;
> +      interrupt-map-mask = <0 0 0 0x7>;
> +      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
> +                      <0 0 0 2 &ioapic1 28 1>,
> +                      <0 0 0 3 &ioapic1 29 1>,
> +                      <0 0 0 4 &ioapic1 30 1>;
> +      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
> +      resets = <&rcu0 0x50 0>;
> +      clocks = <&cgu0 LGM_GCLK_PCIE10>;
> +      phys = <&cb0phy0>;
> +      phy-names = "phy";
> +    };
> +
> +    &pcie10 {

Don't show this soc/board split in examples. Just combine to one node.

> +      status = "okay";
> +      intel,rst-interval = <100>;
> +      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
> +      num-lanes = <2>;
> +    };
> --
> 2.11.0
>
Dilip Kota Aug. 21, 2019, 9:56 a.m. UTC | #2
On 8/20/2019 9:42 PM, Rob Herring wrote:
> On Tue, Aug 20, 2019 at 4:40 AM Dilip Kota <eswara.kota@linux.intel.com> wrote:
>> The Intel PCIe RC controller is Synopsys Designware
>> based PCIe core. Add YAML schemas for PCIe in RC mode
>> present in Intel Universal Gateway soc.
> Run 'make dt_binding_check' and fix all the warnings.
Sure, will run and fix them. Sorry for missing it.
>
>> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
>> ---
>>   .../devicetree/bindings/pci/intel-pcie.yaml        | 133 +++++++++++++++++++++
>>   1 file changed, 133 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pci/intel-pcie.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pci/intel-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
>> new file mode 100644
>> index 000000000000..80caaaba5e2c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
>> @@ -0,0 +1,133 @@
>> +# SPDX-License-Identifier: GPL-2.0
> (GPL-2.0-only OR BSD-2-Clause) is preferred for new bindings.
Sure, will update it.
>
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pci/intel-pcie.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Intel AXI bus based PCI express root complex
>> +
>> +maintainers:
>> +  - Dilip Kota <eswara.kota@linux.intel.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: intel,lgm-pcie
>> +
>> +  device_type:
>> +    const: pci
>> +
>> +  "#address-cells":
>> +    const: 3
>> +
>> +  "#size-cells":
>> +    const: 2
>> +
>> +  reg:
>> +    items:
>> +      - description: Controller control and status registers.
>> +      - description: PCIe configuration registers.
>> +      - description: Controller application registers.
>> +
>> +  reg-names:
>> +    items:
>> +      - const: dbi
>> +      - const: config
>> +      - const: app
>> +
>> +  ranges:
>> +    description: Ranges for the PCI memory and I/O regions.
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    description: PCIe registers interface clock.
>> +
>> +  phys:
>> +    maxItems: 1
>> +
>> +  phy-names:
>> +    const: phy
>> +
>> +  reset-gpios:
>> +    maxItems: 1
>> +
>> +  num-lanes:
>> +    description: Number of lanes to use for this port.
>> +
>> +  linux,pci-domain:
>> +    description: PCI domain ID.
>> +
>> +  interrupts:
>> +    description: PCIe core integrated miscellaneous interrupt.
>> +
>> +  interrupt-map-mask:
>> +    description: Standard PCI IRQ mapping properties.
>> +
>> +  interrupt-map:
>> +    description: Standard PCI IRQ mapping properties.
>> +
>> +  max-link-speed:
>> +    description: Specify PCI Gen for link capability.
>> +
>> +  bus-range:
>> +    description: Range of bus numbers associated with this controller.
>> +
>> +  intel,rst-interval:
> Use 'reset-assert-us'

Sure.
I am thinking of 'reset-assert-ms' to remain in Milli seconds.
Please let me know your view.

>
>> +    description: |
>> +      Device reset interval in ms. Some devices need an interval upto 500ms.
>> +      By default it is 100ms.
>> +
>> +required:
>> +  - compatible
>> +  - device_type
>> +  - reg
>> +  - reg-names
>> +  - ranges
>> +  - resets
>> +  - clocks
>> +  - phys
>> +  - phy-names
>> +  - reset-gpios
>> +  - num-lanes
>> +  - linux,pci-domain
>> +  - interrupts
>> +  - interrupt-map
>> +  - interrupt-map-mask
>> +
>> +examples:
>> +  - |
>> +    pcie10:pcie@d0e00000 {
>> +      compatible = "intel,lgm-pcie";
>> +      device_type = "pci";
>> +      #address-cells = <3>;
>> +      #size-cells = <2>;
>> +      reg = <
>> +            0xd0e00000 0x1000
>> +            0xd2000000 0x800000
>> +            0xd0a41000 0x1000
>> +            >;
>> +      reg-names = "dbi", "config", "app";
>> +      linux,pci-domain = <0>;
>> +      max-link-speed = <4>;
>> +      bus-range = <0x00 0x08>;
>> +      interrupt-parent = <&ioapic1>;
>> +      interrupts = <67 1>;
>> +      interrupt-map-mask = <0 0 0 0x7>;
>> +      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
>> +                      <0 0 0 2 &ioapic1 28 1>,
>> +                      <0 0 0 3 &ioapic1 29 1>,
>> +                      <0 0 0 4 &ioapic1 30 1>;
>> +      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
>> +      resets = <&rcu0 0x50 0>;
>> +      clocks = <&cgu0 LGM_GCLK_PCIE10>;
>> +      phys = <&cb0phy0>;
>> +      phy-names = "phy";
>> +    };
>> +
>> +    &pcie10 {
> Don't show this soc/board split in examples. Just combine to one node.

Sure, will combine.

Thanks for the review comments.

Regards,
Dilip

>
>> +      status = "okay";
>> +      intel,rst-interval = <100>;
>> +      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
>> +      num-lanes = <2>;
>> +    };
>> --
>> 2.11.0
>>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/pci/intel-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
new file mode 100644
index 000000000000..80caaaba5e2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel-pcie.yaml
@@ -0,0 +1,133 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel AXI bus based PCI express root complex
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-pcie
+
+  device_type:
+    const: pci
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  reg:
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe configuration registers.
+      - description: Controller application registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: app
+
+  ranges:
+    description: Ranges for the PCI memory and I/O regions.
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    description: PCIe registers interface clock.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: phy
+
+  reset-gpios:
+    maxItems: 1
+
+  num-lanes:
+    description: Number of lanes to use for this port.
+
+  linux,pci-domain:
+    description: PCI domain ID.
+
+  interrupts:
+    description: PCIe core integrated miscellaneous interrupt.
+
+  interrupt-map-mask:
+    description: Standard PCI IRQ mapping properties.
+
+  interrupt-map:
+    description: Standard PCI IRQ mapping properties.
+
+  max-link-speed:
+    description: Specify PCI Gen for link capability.
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  intel,rst-interval:
+    description: |
+      Device reset interval in ms. Some devices need an interval upto 500ms.
+      By default it is 100ms.
+
+required:
+  - compatible
+  - device_type
+  - reg
+  - reg-names
+  - ranges
+  - resets
+  - clocks
+  - phys
+  - phy-names
+  - reset-gpios
+  - num-lanes
+  - linux,pci-domain
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+
+examples:
+  - |
+    pcie10:pcie@d0e00000 {
+      compatible = "intel,lgm-pcie";
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <
+            0xd0e00000 0x1000
+            0xd2000000 0x800000
+            0xd0a41000 0x1000
+            >;
+      reg-names = "dbi", "config", "app";
+      linux,pci-domain = <0>;
+      max-link-speed = <4>;
+      bus-range = <0x00 0x08>;
+      interrupt-parent = <&ioapic1>;
+      interrupts = <67 1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+                      <0 0 0 2 &ioapic1 28 1>,
+                      <0 0 0 3 &ioapic1 29 1>,
+                      <0 0 0 4 &ioapic1 30 1>;
+      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+      resets = <&rcu0 0x50 0>;
+      clocks = <&cgu0 LGM_GCLK_PCIE10>;
+      phys = <&cb0phy0>;
+      phy-names = "phy";
+    };
+
+    &pcie10 {
+      status = "okay";
+      intel,rst-interval = <100>;
+      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+      num-lanes = <2>;
+    };