Patchwork [v2,3/5] dma-helpers: rewrite completion/cancellation

login
register
mail settings
Submitter Paolo Bonzini
Date Sept. 16, 2011, 2:40 p.m.
Message ID <1316184004-8260-4-git-send-email-pbonzini@redhat.com>
Download mbox | patch
Permalink /patch/114954/
State New
Headers show

Comments

Paolo Bonzini - Sept. 16, 2011, 2:40 p.m.
This fixes various problems with completion/cancellation:

* if the io_func fails to get an AIOCB, the callback wasn't called

* If DMA encounters a bounce buffer conflict, and the DMA operation is
canceled before the bottom half fires, bad things happen.

* memory is not unmapped after cancellation, again causing problems
when doing DMA to I/O areas

* cancellation could leak the iovec

* the callback was missed if the I/O operation failed without returning
an AIOCB

and probably more that I've missed.  The patch fixes them by sharing
the cleanup code between completion and cancellation.  The dma_bdrv_cb
now returns a boolean completed/not completed flag, and the wrapper
dma_continue takes care of tasks to do upon completion.

Most of these are basically impossible in practice, but it is better
to be tidy...

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
	v1->v2: call the callback when the io_func fails.  Add
	in_cancel.

 dma-helpers.c |   44 +++++++++++++++++++++++++++++++-------------
 1 files changed, 31 insertions(+), 13 deletions(-)

Patch

diff --git a/dma-helpers.c b/dma-helpers.c
index 717e384..86d2d0a 100644
--- a/dma-helpers.c
+++ b/dma-helpers.c
@@ -43,6 +43,7 @@  typedef struct {
     QEMUSGList *sg;
     uint64_t sector_num;
     bool to_dev;
+    bool in_cancel;
     int sg_cur_index;
     target_phys_addr_t sg_cur_byte;
     QEMUIOVector iov;
@@ -58,7 +59,7 @@  static void reschedule_dma(void *opaque)
 
     qemu_bh_delete(dbs->bh);
     dbs->bh = NULL;
-    dma_bdrv_cb(opaque, 0);
+    dma_bdrv_cb(dbs, 0);
 }
 
 static void continue_after_map_failure(void *opaque)
@@ -78,6 +79,26 @@  static void dma_bdrv_unmap(DMAAIOCB *dbs)
                                   dbs->iov.iov[i].iov_len, !dbs->to_dev,
                                   dbs->iov.iov[i].iov_len);
     }
+    qemu_iovec_reset(&dbs->iov);
+}
+
+static void dma_complete(DMAAIOCB *dbs, int ret)
+{
+    dma_bdrv_unmap(dbs);
+    if (dbs->common.cb) {
+        dbs->common.cb(dbs->common.opaque, ret);
+    }
+    qemu_iovec_destroy(&dbs->iov);
+    if (dbs->bh) {
+        qemu_bh_delete(dbs->bh);
+        dbs->bh = NULL;
+    }
+    if (!dbs->in_cancel) {
+        /* Requests may complete while dma_aio_cancel is in progress.  In
+         * this case, the AIOCB should not be released because it is still
+         * referenced by dma_aio_cancel.  */
+        qemu_aio_release(dbs);
+    }
 }
 
 static void dma_bdrv_cb(void *opaque, int ret)
@@ -89,12 +110,9 @@  static void dma_bdrv_cb(void *opaque, int ret)
     dbs->acb = NULL;
     dbs->sector_num += dbs->iov.size / 512;
     dma_bdrv_unmap(dbs);
-    qemu_iovec_reset(&dbs->iov);
 
     if (dbs->sg_cur_index == dbs->sg->nsg || ret < 0) {
-        dbs->common.cb(dbs->common.opaque, ret);
-        qemu_iovec_destroy(&dbs->iov);
-        qemu_aio_release(dbs);
+        dma_complete(dbs, ret);
         return;
     }
 
@@ -120,9 +138,7 @@  static void dma_bdrv_cb(void *opaque, int ret)
     dbs->acb = dbs->io_func(dbs->bs, dbs->sector_num, &dbs->iov,
                             dbs->iov.size / 512, dma_bdrv_cb, dbs);
     if (!dbs->acb) {
-        dma_bdrv_unmap(dbs);
-        qemu_iovec_destroy(&dbs->iov);
-        return;
+        dma_complete(dbs, -EIO);
     }
 }
 
@@ -131,8 +147,14 @@  static void dma_aio_cancel(BlockDriverAIOCB *acb)
     DMAAIOCB *dbs = container_of(acb, DMAAIOCB, common);
 
     if (dbs->acb) {
-        bdrv_aio_cancel(dbs->acb);
+        BlockDriverAIOCB *acb = dbs->acb;
+        dbs->acb = NULL;
+        dbs->in_cancel = true;
+        bdrv_aio_cancel(acb);
+        dbs->in_cancel = false;
     }
+    dbs->common.cb = NULL;
+    dma_complete(dbs, 0);
 }
 
 static AIOPool dma_aio_pool = {
@@ -158,10 +180,6 @@  BlockDriverAIOCB *dma_bdrv_io(
     dbs->bh = NULL;
     qemu_iovec_init(&dbs->iov, sg->nsg);
     dma_bdrv_cb(dbs, 0);
-    if (!dbs->acb) {
-        qemu_aio_release(dbs);
-        return NULL;
-    }
     return &dbs->common;
 }