diff mbox series

[v5,04/17] MIPS: PCI: refactor ioc3 special handling

Message ID 20190819163144.3478-5-tbogendoerfer@suse.de
State Not Applicable
Headers show
Series Use MFD framework for SGI IOC3 drivers | expand

Commit Message

Thomas Bogendoerfer Aug. 19, 2019, 4:31 p.m. UTC 
Refactored code to only have one ioc3 special handling for read
access and one for write access.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 arch/mips/pci/pci-xtalk-bridge.c | 167 +++++++++++++++------------------------
 1 file changed, 62 insertions(+), 105 deletions(-)

Comments

Paul Burton Sept. 3, 2019, 9:10 a.m. UTC | #1 
Hello,

Thomas Bogendoerfer wrote:
> Refactored code to only have one ioc3 special handling for read
> access and one for write access.

Applied to mips-next.

> commit 813cafc4109c
> https://git.kernel.org/mips/c/813cafc4109c
> 
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> Signed-off-by: Paul Burton <paul.burton@mips.com>

Thanks,
    Paul

[ This message was auto-generated; if you believe anything is incorrect
  then please email paul.burton@mips.com to report it. ]
diff mbox series

Patch

diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
index bcf7f559789a..7b4d40354ee7 100644
--- a/arch/mips/pci/pci-xtalk-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -20,16 +20,50 @@ 
  * Most of the IOC3 PCI config register aren't present
  * we emulate what is needed for a normal PCI enumeration
  */
-static u32 emulate_ioc3_cfg(int where, int size)
+static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value)
 {
-	if (size == 1 && where == 0x3d)
-		return 0x01;
-	else if (size == 2 && where == 0x3c)
-		return 0x0100;
-	else if (size == 4 && where == 0x3c)
-		return 0x00000100;
+	u32 cf, shift, mask;
 
-	return 0;
+	switch (where & ~3) {
+	case 0x00 ... 0x10:
+	case 0x40 ... 0x44:
+		if (get_dbe(cf, (u32 *)addr))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		break;
+	case 0x3c:
+		/* emulate sane interrupt pin value */
+		cf = 0x00000100;
+		break;
+	default:
+		cf = 0;
+		break;
+	}
+	shift = (where & 3) << 3;
+	mask = 0xffffffffU >> ((4 - size) << 3);
+	*value = (cf >> shift) & mask;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int ioc3_cfg_wr(void *addr, int where, int size, u32 value)
+{
+	u32 cf, shift, mask, smask;
+
+	if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
+		return PCIBIOS_SUCCESSFUL;
+
+	if (get_dbe(cf, (u32 *)addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	shift = ((where & 3) << 3);
+	mask = (0xffffffffU >> ((4 - size) << 3));
+	smask = mask << shift;
+
+	cf = (cf & ~smask) | ((value & mask) << shift);
+	if (put_dbe(cf, (u32 *)addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
 }
 
 static void bridge_disable_swapping(struct pci_dev *dev)
@@ -64,7 +98,7 @@  static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
 	int slot = PCI_SLOT(devfn);
 	int fn = PCI_FUNC(devfn);
 	void *addr;
-	u32 cf, shift, mask;
+	u32 cf;
 	int res;
 
 	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
@@ -75,8 +109,10 @@  static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
 	 * IOC3 is broken beyond belief ...  Don't even give the
 	 * generic PCI code a chance to look at it for real ...
 	 */
-	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
-		goto is_ioc3;
+	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
+		addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+		return ioc3_cfg_rd(addr, where, size, value);
+	}
 
 	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
 
@@ -88,26 +124,6 @@  static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
 		res = get_dbe(*value, (u32 *)addr);
 
 	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
-	/*
-	 * IOC3 special handling
-	 */
-	if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
-		*value = emulate_ioc3_cfg(where, size);
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-	if (get_dbe(cf, (u32 *)addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = ((where & 3) << 3);
-	mask = (0xffffffffU >> ((4 - size) << 3));
-	*value = (cf >> shift) & mask;
-
-	return PCIBIOS_SUCCESSFUL;
 }
 
 static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
@@ -119,7 +135,7 @@  static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
 	int slot = PCI_SLOT(devfn);
 	int fn = PCI_FUNC(devfn);
 	void *addr;
-	u32 cf, shift, mask;
+	u32 cf;
 	int res;
 
 	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
@@ -131,8 +147,10 @@  static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
 	 * IOC3 is broken beyond belief ...  Don't even give the
 	 * generic PCI code a chance to look at it for real ...
 	 */
-	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
-		goto is_ioc3;
+	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
+		addr = &bridge->b_type1_cfg.c[(fn << 8) | (where & ~3)];
+		return ioc3_cfg_rd(addr, where, size, value);
+	}
 
 	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
 
@@ -144,26 +162,6 @@  static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
 		res = get_dbe(*value, (u32 *)addr);
 
 	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
-	/*
-	 * IOC3 special handling
-	 */
-	if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
-		*value = emulate_ioc3_cfg(where, size);
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	addr = &bridge->b_type1_cfg.c[(fn << 8) | where];
-	if (get_dbe(cf, (u32 *)addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = ((where & 3) << 3);
-	mask = (0xffffffffU >> ((4 - size) << 3));
-	*value = (cf >> shift) & mask;
-
-	return PCIBIOS_SUCCESSFUL;
 }
 
 static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
@@ -183,7 +181,7 @@  static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
 	int slot = PCI_SLOT(devfn);
 	int fn = PCI_FUNC(devfn);
 	void *addr;
-	u32 cf, shift, mask, smask;
+	u32 cf;
 	int res;
 
 	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
@@ -194,8 +192,10 @@  static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
 	 * IOC3 is broken beyond belief ...  Don't even give the
 	 * generic PCI code a chance to look at it for real ...
 	 */
-	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
-		goto is_ioc3;
+	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
+		addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+		return ioc3_cfg_wr(addr, where, size, value);
+	}
 
 	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
 
@@ -210,29 +210,6 @@  static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	return PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
-	/*
-	 * IOC3 special handling
-	 */
-	if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
-		return PCIBIOS_SUCCESSFUL;
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
-	if (get_dbe(cf, (u32 *)addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = ((where & 3) << 3);
-	mask = (0xffffffffU >> ((4 - size) << 3));
-	smask = mask << shift;
-
-	cf = (cf & ~smask) | ((value & mask) << shift);
-	if (put_dbe(cf, (u32 *)addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
 }
 
 static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
@@ -244,7 +221,7 @@  static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
 	int fn = PCI_FUNC(devfn);
 	int busno = bus->number;
 	void *addr;
-	u32 cf, shift, mask, smask;
+	u32 cf;
 	int res;
 
 	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
@@ -256,8 +233,10 @@  static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
 	 * IOC3 is broken beyond belief ...  Don't even give the
 	 * generic PCI code a chance to look at it for real ...
 	 */
-	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
-		goto is_ioc3;
+	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
+		addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+		return ioc3_cfg_wr(addr, where, size, value);
+	}
 
 	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
 
@@ -272,28 +251,6 @@  static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	return PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
-	/*
-	 * IOC3 special handling
-	 */
-	if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
-		return PCIBIOS_SUCCESSFUL;
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-	if (get_dbe(cf, (u32 *)addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = ((where & 3) << 3);
-	mask = (0xffffffffU >> ((4 - size) << 3));
-	smask = mask << shift;
-
-	cf = (cf & ~smask) | ((value & mask) << shift);
-	if (put_dbe(cf, (u32 *)addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
 }
 
 static int pci_write_config(struct pci_bus *bus, unsigned int devfn,