[v6,4/8] PCI/IOV: Add pci_physfn_reslock/unlock() interfaces
diff mbox series

Message ID 6763a208e1782d7e58d72d131b8faad5529b890a.1565997310.git.sathyanarayanan.kuppuswamy@linux.intel.com
State Superseded
Delegated to: Bjorn Helgaas
Headers show
Series
  • Fix PF/VF dependency issue
Related show

Commit Message

Kuppuswamy Sathyanarayanan Aug. 17, 2019, 12:10 a.m. UTC
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

As per PCIe spec r5.0, sec 9.3.7, in SR-IOV devices, capabilities like
PASID, PRI, VC, etc are shared between PF and its associated VFs. So, to
prevent race conditions between PF/VF while updating configuration
registers of these shared capabilities, a new synchronization mechanism
is required.

As a first step, create shared resource lock and expose expose
pci_physfn_reslock/unlock() API's. Users of these shared capabilities can
use these lock/unlock interfaces to synchronize its access.

Since the shared capability is always implemented by PF, reslock mutex
has been added to pci_sriov structure which only exists for PF.

NOTE: Currently this reslock is common for all shared capabilities
between PF/VF. In future, if any performance impact has been noticed, we
should create individual locks for each of the shared capability.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/iov.c |  1 +
 drivers/pci/pci.h | 40 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+)

Patch
diff mbox series

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 525fd3f272b3..004e7076b065 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -507,6 +507,7 @@  static int sriov_init(struct pci_dev *dev, int pos)
 	else
 		iov->dev = dev;
 
+	mutex_init(&iov->reslock);
 	dev->sriov = iov;
 	dev->is_physfn = 1;
 	rc = compute_max_vf_buses(dev);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index d22d1b807701..c7fa09f3389a 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -304,6 +304,19 @@  struct pci_sriov {
 	u16		subsystem_device; /* VF subsystem device */
 	resource_size_t	barsz[PCI_SRIOV_NUM_BARS];	/* VF BAR size */
 	bool		drivers_autoprobe; /* Auto probing of VFs by driver */
+	/*
+	 * reslock mutex is used for synchronizing updates to resources
+	 * shared between PF and all associated VFs. For example, in
+	 * SRIOV devices, PRI and PASID interfaces are shared between
+	 * PF an all VFs, and hence we need proper locking mechanism to
+	 * prevent both PF and VF update the PRI or PASID configuration
+	 * registers at the same time.
+	 * NOTE: Currently, this lock is shared by all capabilities that
+	 * has shared resource between PF and VFs. If there is any performance
+	 * impact then perhaps we need to create separate lock for each of
+	 * the independent capability that has shared resources.
+	 */
+	struct mutex	reslock;	/* PF/VF shared resource lock */
 };
 
 /**
@@ -433,6 +446,27 @@  void pci_iov_update_resource(struct pci_dev *dev, int resno);
 resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
 void pci_restore_iov_state(struct pci_dev *dev);
 int pci_iov_bus_range(struct pci_bus *bus);
+static inline void pci_physfn_reslock(struct pci_dev *dev)
+{
+	struct pci_dev *pf = pci_physfn(dev);
+
+	/* For non SRIOV devices, locking is not needed */
+	if (!pf->is_physfn)
+		return;
+
+	mutex_lock(&pf->sriov->reslock);
+}
+
+static inline void pci_physfn_resunlock(struct pci_dev *dev)
+{
+	struct pci_dev *pf = pci_physfn(dev);
+
+	/* For non SRIOV devices, reslock is never held */
+	if (!pf->is_physfn)
+		return;
+
+	mutex_unlock(&pf->sriov->reslock);
+}
 
 #else
 static inline int pci_iov_init(struct pci_dev *dev)
@@ -453,6 +487,12 @@  static inline int pci_iov_bus_range(struct pci_bus *bus)
 {
 	return 0;
 }
+static inline void pci_physfn_reslock(struct pci_dev *dev)
+{
+}
+static inline void pci_physfn_resunlock(struct pci_dev *dev)
+{
+}
 
 #endif /* CONFIG_PCI_IOV */