pull-request: can-next 2019-08-14
mbox series

Message ID f0658ccd-389f-fc60-7538-c512112b9978@pengutronix.de
State Accepted
Delegated to: David Miller
Headers show
Series
  • pull-request: can-next 2019-08-14
Related show

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-5.4-20190814

Message

Marc Kleine-Budde Aug. 14, 2019, 6:16 a.m. UTC
Hello David,

this is a pull request for net-next/master consisting of 41 patches.

The first two patches are for the kvaser_pciefd driver: Christer Beskow
removes unnecessary code in the kvaser_pciefd_pwm_stop() function,
YueHaibing removes the unused including of <linux/version.h>.

In the next patch YueHaibing also removes the unused including of
<linux/version.h> in the f81601 driver.

In the ti_hecc driver the next 6 patches are by me and fix checkpatch
warnings. YueHaibing's patch removes an unused variable in the
ti_hecc_mailbox_read() function.

The next 6 patches all target the xilinx_can driver. Anssi Hannula's
patch fixes a chip start failure with an invalid bus. The patch by
Venkatesh Yadav Abbarapu skips an error message in case of a deferred
probe. The 3 patches by Appana Durga Kedareswara rao fix the RX and TX
path for CAN-FD frames. Srinivas Neeli's patch fixes the bit timing
calculations for CAN-FD.

The next 12 patches are by me and several checkpatch warnings in the
af_can, raw and bcm components.

Thomas Gleixner provides a patch for the bcm, which switches the timer
to HRTIMER_MODE_SOFT and removes the hrtimer_tasklet.

Then 6 more patches by me for the gw component, which fix checkpatch
warnings, followed by 2 patches by Oliver Hartkopp to add CAN-FD
support.

The vcan driver gets 3 patches by me, fixing checkpatch warnings.

And finally a patch by Andre Hartmann to fix typos in CAN's netlink
header.

regards,
Marc

---

The following changes since commit 53f6f391786e01bf2050c03d8a36d9defdcc2831:

  caif: no need to check return value of debugfs_create functions (2019-08-11 21:31:25 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-5.4-20190814

for you to fetch changes up to 3ca3c4aad2efa2931b663acc4ece7a38b31071d1:

  can: netlink: fix documentation typos (2019-08-13 17:32:21 +0200)

----------------------------------------------------------------
linux-can-next-for-5.4-20190814

----------------------------------------------------------------
Andre Hartmann (1):
      can: netlink: fix documentation typos

Anssi Hannula (1):
      can: xilinx_can: xcan_chip_start(): fix failure with invalid bus

Appana Durga Kedareswara rao (3):
      can: xilinx_can: xcanfd_rx(): fix FSR register handling in the RX path
      can: xilinx_can: fix the data update logic for CANFD FD frames
      can: xilinx_can: xcan_rx_fifo_get_next_frame(): fix FSR register FL and RI mask values for canfd 2.0

Christer Beskow (1):
      can: kvaser_pciefd: kvaser_pciefd_pwm_stop(): remove unnecessary code when setting pwm duty cycle to zero

Marc Kleine-Budde (27):
      can: ti_hecc: convert block comments to network style comments
      can: ti_hecc: fix indention
      can: ti_hecc: avoid long lines
      can: ti_hecc: fix print formating strings
      can: ti_hecc: ti_hecc_start(): avoid multiple assignments
      can: ti_hecc: ti_hecc_mailbox_read(): add blank lines to improve readability
      can: af_can: convert block comments to network style comments
      can: af_can: balance braces around else statements
      can: af_can: fix alignment
      can: af_can: avoid splitting quoted string across lines
      can: af_can: can_pernet_init(): Use preferred style kzalloc(sizeof()) usage
      can: af_can: add missing identifiers to struct receiver::func
      can: raw: convert block comments to network style comments
      can: raw: remove unnecessary blank lines, add suggested blank lines
      can: raw: balance braces around else statements
      can: raw: raw_module_init(): use pr_err() instead of printk(KERN_ERR, ...)
      can: raw: raw_sock_no_ioctlcmd(): mark function as static
      can: bcm: bcm_sock_no_ioctlcmd(): mark function as static
      can: gw: convert block comments to network style comments
      can: gw: remove unnecessary blank lines, add suggested blank lines
      can: gw: add missing spaces around operators
      can: gw: can_can_gw_rcv(): remove return at end of void function
      can: gw: cgw_dump_jobs(): avoid long lines
      can: gw: cgw_parse_attr(): remove unnecessary braces for single statement block
      can: vcan: convert block comments to network style comments
      can: vcan: remove unnecessary blank lines
      can: vcan: introduce pr_fmt and make use of it

Oliver Hartkopp (2):
      can: gw: use struct canfd_frame as internal data structure
      can: gw: add support for CAN FD frames

Srinivas Neeli (1):
      can: xilinx_can: xcan_set_bittiming(): fix the data phase btr1 calculation

Thomas Gleixner (1):
      can: bcm: switch timer to HRTIMER_MODE_SOFT and remove hrtimer_tasklet

Venkatesh Yadav Abbarapu (1):
      can: xilinx_can: xcan_probe(): skip error message on deferred probe

YueHaibing (3):
      can: kvaser_pciefd: Remove unused including <linux/version.h>
      can: sja1000: f81601: remove unused including <linux/version.h>
      can: ti_hecc: ti_hecc_mailbox_read(): remove set but not used variable 'mbx_mask'

 drivers/net/can/kvaser_pciefd.c  |  11 +-
 drivers/net/can/sja1000/f81601.c |   1 -
 drivers/net/can/ti_hecc.c        |  85 ++++---
 drivers/net/can/vcan.c           |  19 +-
 drivers/net/can/xilinx_can.c     | 175 ++++++--------
 include/uapi/linux/can/gw.h      |  17 +-
 include/uapi/linux/can/netlink.h |   6 +-
 net/can/af_can.c                 |  89 +++----
 net/can/af_can.h                 |   5 +-
 net/can/bcm.c                    | 160 +++++-------
 net/can/gw.c                     | 510 +++++++++++++++++++++++++--------------
 net/can/raw.c                    |  34 ++-
 12 files changed, 579 insertions(+), 533 deletions(-)

Comments

David Miller Aug. 15, 2019, 7:43 p.m. UTC | #1
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Wed, 14 Aug 2019 08:16:24 +0200

> this is a pull request for net-next/master consisting of 41 patches.
 ...

Pulled, thanks Marc.