[U-Boot,v2,2/4] mmc: Add Aspeed SD controller driver
diff mbox series

Message ID 1565724701-17344-3-git-send-email-eajames@linux.ibm.com
State Superseded
Delegated to: Peng Fan
Headers show
Series
  • ARM: aspeed: Add SD host controller driver
Related show

Commit Message

Eddie James Aug. 13, 2019, 7:31 p.m. UTC
Add support for the Aspeed SD host controller engine.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/mmc/Kconfig        | 11 +++++++
 drivers/mmc/Makefile       |  1 +
 drivers/mmc/aspeed_sdhci.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 90 insertions(+)
 create mode 100644 drivers/mmc/aspeed_sdhci.c

Comments

Cédric Le Goater Aug. 14, 2019, 3:18 p.m. UTC | #1
On 13/08/2019 21:31, Eddie James wrote:
> Add support for the Aspeed SD host controller engine.

It looks correct and simple enough. Some comments below.

> 
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
>  drivers/mmc/Kconfig        | 11 +++++++
>  drivers/mmc/Makefile       |  1 +
>  drivers/mmc/aspeed_sdhci.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 90 insertions(+)
>  create mode 100644 drivers/mmc/aspeed_sdhci.c
> 
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index c6812f6..536f66a 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -421,6 +421,17 @@ config SPL_MMC_SDHCI_ADMA
>  	  This enables support for the ADMA (Advanced DMA) defined
>  	  in the SD Host Controller Standard Specification Version 3.00 in SPL.
>  
> +config MMC_SDHCI_ASPEED
> +	bool "Aspeed SDHCI controller"
> +	depends on ARCH_ASPEED
> +	depends on DM_MMC
> +	depends on MMC_SDHCI
> +	help
> +	  Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
> +	  SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
> +	  specifications. On the AST2600, the device is also compatible with
> +	  MMC 5.1 and eMMC 3.0.
> +
>  config MMC_SDHCI_ATMEL
>  	bool "Atmel SDHCI controller support"
>  	depends on ARCH_AT91
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 6cc018b..5594195 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
>  
>  # SDHCI
>  obj-$(CONFIG_MMC_SDHCI)			+= sdhci.o
> +obj-$(CONFIG_MMC_SDHCI_ASPEED)		+= aspeed_sdhci.o
>  obj-$(CONFIG_MMC_SDHCI_ATMEL)		+= atmel_sdhci.o
>  obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= bcm2835_sdhci.o
>  obj-$(CONFIG_MMC_SDHCI_BCMSTB)		+= bcmstb_sdhci.o
> diff --git a/drivers/mmc/aspeed_sdhci.c b/drivers/mmc/aspeed_sdhci.c
> new file mode 100644
> index 0000000..c292c42
> --- /dev/null
> +++ b/drivers/mmc/aspeed_sdhci.c
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019 IBM Corp.
> + * Eddie James <eajames@linux.ibm.com>
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <malloc.h>
> +#include <sdhci.h>
> +
> +struct aspeed_sdhci_plat {
> +	struct mmc_config cfg;
> +	struct mmc mmc;
> +};
> +
> +static int aspeed_sdhci_probe(struct udevice *dev)
> +{
> +	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> +	struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
> +	struct sdhci_host *host = dev_get_priv(dev);
> +	u32 max_clk;
> +	struct clk clk;
> +	int ret;
> +
> +	ret = clk_get_by_index(dev, 0, &clk);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_enable(&clk);
> +	if (ret)
> +		return ret;

Don't we need to release the clock below in case of error ? 
> +	host->name = dev->name;
> +	host->ioaddr = (void *)devfdt_get_addr(dev);
> +
> +	max_clk = clk_get_rate(&clk);
> +	if (!max_clk)

may be use IS_ERR_VALUE(max_clk) and return max_clk

> +		return -EINVAL;
> +
> +	host->max_clk = max_clk;
> +	host->mmc = &plat->mmc;
> +	host->mmc->dev = dev;
> +	host->mmc->priv = host;
> +	upriv->mmc = host->mmc;
> +
> +	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
> +	if (ret)
> +		return ret;
> +
> +	return sdhci_probe(dev);
> +}
> +
> +static int aspeed_sdhci_bind(struct udevice *dev)
> +{
> +	struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
> +
> +	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
> +}
> +
> +static const struct udevice_id aspeed_sdhci_ids[] = {
> +	{ .compatible = "aspeed,ast2400-sdhci" },
> +	{ .compatible = "aspeed,ast2500-sdhci" },
> +	{ .compatible = "aspeed,ast2600-sdhci" },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(aspeed_sdhci_drv) = {
> +	.name		= "aspeed_sdhci",
> +	.id		= UCLASS_MMC,
> +	.of_match	= aspeed_sdhci_ids,
> +	.ops		= &sdhci_ops,
> +	.bind		= aspeed_sdhci_bind,
> +	.probe		= aspeed_sdhci_probe,
> +	.priv_auto_alloc_size = sizeof(struct sdhci_host),
> +	.platdata_auto_alloc_size = sizeof(struct aspeed_sdhci_plat),
> +};
>
Eddie James Aug. 15, 2019, 7:27 p.m. UTC | #2
On 8/14/19 10:18 AM, Cédric Le Goater wrote:
> On 13/08/2019 21:31, Eddie James wrote:
>> Add support for the Aspeed SD host controller engine.
> It looks correct and simple enough. Some comments below.
>
>> Signed-off-by: Eddie James <eajames@linux.ibm.com>
>> ---
>>   drivers/mmc/Kconfig        | 11 +++++++
>>   drivers/mmc/Makefile       |  1 +
>>   drivers/mmc/aspeed_sdhci.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 90 insertions(+)
>>   create mode 100644 drivers/mmc/aspeed_sdhci.c
>>
>> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
>> index c6812f6..536f66a 100644
>> --- a/drivers/mmc/Kconfig
>> +++ b/drivers/mmc/Kconfig
>> @@ -421,6 +421,17 @@ config SPL_MMC_SDHCI_ADMA
>>   	  This enables support for the ADMA (Advanced DMA) defined
>>   	  in the SD Host Controller Standard Specification Version 3.00 in SPL.
>>   
>> +config MMC_SDHCI_ASPEED
>> +	bool "Aspeed SDHCI controller"
>> +	depends on ARCH_ASPEED
>> +	depends on DM_MMC
>> +	depends on MMC_SDHCI
>> +	help
>> +	  Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
>> +	  SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
>> +	  specifications. On the AST2600, the device is also compatible with
>> +	  MMC 5.1 and eMMC 3.0.
>> +
>>   config MMC_SDHCI_ATMEL
>>   	bool "Atmel SDHCI controller support"
>>   	depends on ARCH_AT91
>> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
>> index 6cc018b..5594195 100644
>> --- a/drivers/mmc/Makefile
>> +++ b/drivers/mmc/Makefile
>> @@ -46,6 +46,7 @@ obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
>>   
>>   # SDHCI
>>   obj-$(CONFIG_MMC_SDHCI)			+= sdhci.o
>> +obj-$(CONFIG_MMC_SDHCI_ASPEED)		+= aspeed_sdhci.o
>>   obj-$(CONFIG_MMC_SDHCI_ATMEL)		+= atmel_sdhci.o
>>   obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= bcm2835_sdhci.o
>>   obj-$(CONFIG_MMC_SDHCI_BCMSTB)		+= bcmstb_sdhci.o
>> diff --git a/drivers/mmc/aspeed_sdhci.c b/drivers/mmc/aspeed_sdhci.c
>> new file mode 100644
>> index 0000000..c292c42
>> --- /dev/null
>> +++ b/drivers/mmc/aspeed_sdhci.c
>> @@ -0,0 +1,78 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright 2019 IBM Corp.
>> + * Eddie James <eajames@linux.ibm.com>
>> + */
>> +
>> +#include <common.h>
>> +#include <clk.h>
>> +#include <dm.h>
>> +#include <malloc.h>
>> +#include <sdhci.h>
>> +
>> +struct aspeed_sdhci_plat {
>> +	struct mmc_config cfg;
>> +	struct mmc mmc;
>> +};
>> +
>> +static int aspeed_sdhci_probe(struct udevice *dev)
>> +{
>> +	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
>> +	struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
>> +	struct sdhci_host *host = dev_get_priv(dev);
>> +	u32 max_clk;
>> +	struct clk clk;
>> +	int ret;
>> +
>> +	ret = clk_get_by_index(dev, 0, &clk);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = clk_enable(&clk);
>> +	if (ret)
>> +		return ret;
> Don't we need to release the clock below in case of error ?


Yes.


>> +	host->name = dev->name;
>> +	host->ioaddr = (void *)devfdt_get_addr(dev);
>> +
>> +	max_clk = clk_get_rate(&clk);
>> +	if (!max_clk)
> may be use IS_ERR_VALUE(max_clk) and return max_clk


Yep, good idea.


Thanks for the quick review!

Eddie


>
>> +		return -EINVAL;
>> +
>> +	host->max_clk = max_clk;
>> +	host->mmc = &plat->mmc;
>> +	host->mmc->dev = dev;
>> +	host->mmc->priv = host;
>> +	upriv->mmc = host->mmc;
>> +
>> +	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
>> +	if (ret)
>> +		return ret;
>> +
>> +	return sdhci_probe(dev);
>> +}
>> +
>> +static int aspeed_sdhci_bind(struct udevice *dev)
>> +{
>> +	struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
>> +
>> +	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
>> +}
>> +
>> +static const struct udevice_id aspeed_sdhci_ids[] = {
>> +	{ .compatible = "aspeed,ast2400-sdhci" },
>> +	{ .compatible = "aspeed,ast2500-sdhci" },
>> +	{ .compatible = "aspeed,ast2600-sdhci" },
>> +	{ }
>> +};
>> +
>> +U_BOOT_DRIVER(aspeed_sdhci_drv) = {
>> +	.name		= "aspeed_sdhci",
>> +	.id		= UCLASS_MMC,
>> +	.of_match	= aspeed_sdhci_ids,
>> +	.ops		= &sdhci_ops,
>> +	.bind		= aspeed_sdhci_bind,
>> +	.probe		= aspeed_sdhci_probe,
>> +	.priv_auto_alloc_size = sizeof(struct sdhci_host),
>> +	.platdata_auto_alloc_size = sizeof(struct aspeed_sdhci_plat),
>> +};
>>

Patch
diff mbox series

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index c6812f6..536f66a 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -421,6 +421,17 @@  config SPL_MMC_SDHCI_ADMA
 	  This enables support for the ADMA (Advanced DMA) defined
 	  in the SD Host Controller Standard Specification Version 3.00 in SPL.
 
+config MMC_SDHCI_ASPEED
+	bool "Aspeed SDHCI controller"
+	depends on ARCH_ASPEED
+	depends on DM_MMC
+	depends on MMC_SDHCI
+	help
+	  Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
+	  SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
+	  specifications. On the AST2600, the device is also compatible with
+	  MMC 5.1 and eMMC 3.0.
+
 config MMC_SDHCI_ATMEL
 	bool "Atmel SDHCI controller support"
 	depends on ARCH_AT91
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 6cc018b..5594195 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -46,6 +46,7 @@  obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
 
 # SDHCI
 obj-$(CONFIG_MMC_SDHCI)			+= sdhci.o
+obj-$(CONFIG_MMC_SDHCI_ASPEED)		+= aspeed_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_ATMEL)		+= atmel_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= bcm2835_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_BCMSTB)		+= bcmstb_sdhci.o
diff --git a/drivers/mmc/aspeed_sdhci.c b/drivers/mmc/aspeed_sdhci.c
new file mode 100644
index 0000000..c292c42
--- /dev/null
+++ b/drivers/mmc/aspeed_sdhci.c
@@ -0,0 +1,78 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 IBM Corp.
+ * Eddie James <eajames@linux.ibm.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+struct aspeed_sdhci_plat {
+	struct mmc_config cfg;
+	struct mmc mmc;
+};
+
+static int aspeed_sdhci_probe(struct udevice *dev)
+{
+	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
+	struct sdhci_host *host = dev_get_priv(dev);
+	u32 max_clk;
+	struct clk clk;
+	int ret;
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(&clk);
+	if (ret)
+		return ret;
+
+	host->name = dev->name;
+	host->ioaddr = (void *)devfdt_get_addr(dev);
+
+	max_clk = clk_get_rate(&clk);
+	if (!max_clk)
+		return -EINVAL;
+
+	host->max_clk = max_clk;
+	host->mmc = &plat->mmc;
+	host->mmc->dev = dev;
+	host->mmc->priv = host;
+	upriv->mmc = host->mmc;
+
+	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
+	if (ret)
+		return ret;
+
+	return sdhci_probe(dev);
+}
+
+static int aspeed_sdhci_bind(struct udevice *dev)
+{
+	struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
+
+	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static const struct udevice_id aspeed_sdhci_ids[] = {
+	{ .compatible = "aspeed,ast2400-sdhci" },
+	{ .compatible = "aspeed,ast2500-sdhci" },
+	{ .compatible = "aspeed,ast2600-sdhci" },
+	{ }
+};
+
+U_BOOT_DRIVER(aspeed_sdhci_drv) = {
+	.name		= "aspeed_sdhci",
+	.id		= UCLASS_MMC,
+	.of_match	= aspeed_sdhci_ids,
+	.ops		= &sdhci_ops,
+	.bind		= aspeed_sdhci_bind,
+	.probe		= aspeed_sdhci_probe,
+	.priv_auto_alloc_size = sizeof(struct sdhci_host),
+	.platdata_auto_alloc_size = sizeof(struct aspeed_sdhci_plat),
+};