diff mbox series

[v7,2/2] dt-bindings: rtc: add bindings for FlexTimer Module

Message ID 20190813030157.48590-2-biwen.li@nxp.com
State Accepted
Headers show
Series [v7,1/2] rtc/fsl: add FTM alarm driver as the wakeup source | expand

Commit Message

Biwen Li Aug. 13, 2019, 3:01 a.m. UTC
The patch adds bindings for FlexTimer Module

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v7:
    - delete aliases

Change in v6:
    - correct subject
    - delete note
    - remove reg property about IP Powerdown exception register

Change in v5:
    - None

Change in v4:
    - add note about dts and kernel options
    - add aliases in example

Change in v3:
	- remove reg-names property
	- correct cells number

Change in v2:
	- replace ls1043a with ls1088a as example
	- add rcpm node and fsl,rcpm-wakeup property

 .../bindings/rtc/rtc-fsl-ftm-alarm.txt        | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt

Comments

Alexandre Belloni Aug. 22, 2019, 9:12 p.m. UTC | #1
On 13/08/2019 11:01:57+0800, Biwen Li wrote:
> The patch adds bindings for FlexTimer Module
> 
> Signed-off-by: Biwen Li <biwen.li@nxp.com>
> ---
> Change in v7:
>     - delete aliases
> 
> Change in v6:
>     - correct subject
>     - delete note
>     - remove reg property about IP Powerdown exception register
> 
> Change in v5:
>     - None
> 
> Change in v4:
>     - add note about dts and kernel options
>     - add aliases in example
> 
> Change in v3:
> 	- remove reg-names property
> 	- correct cells number
> 
> Change in v2:
> 	- replace ls1043a with ls1088a as example
> 	- add rcpm node and fsl,rcpm-wakeup property
> 
>  .../bindings/rtc/rtc-fsl-ftm-alarm.txt        | 35 +++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> 
Applied, thanks.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
new file mode 100644
index 000000000000..4bbb97da904c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
@@ -0,0 +1,35 @@ 
+Freescale FlexTimer Module (FTM) Alarm
+
+Required properties:
+- compatible : Should be "fsl,<chip>-ftm-alarm", the
+	       supported chips include
+	       "fsl,ls1012a-ftm-alarm"
+	       "fsl,ls1021a-ftm-alarm"
+	       "fsl,ls1028a-ftm-alarm"
+	       "fsl,ls1043a-ftm-alarm"
+	       "fsl,ls1046a-ftm-alarm"
+	       "fsl,ls1088a-ftm-alarm"
+	       "fsl,ls208xa-ftm-alarm"
+- reg : Specifies base physical address and size of the register sets for the
+  FlexTimer Module.
+- interrupts : Should be the FlexTimer Module interrupt.
+- fsl,rcpm-wakeup property and rcpm node : Please refer
+	Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+
+Optional properties:
+- big-endian: If the host controller is big-endian mode, specify this property.
+  The default endian mode is little-endian.
+
+Example:
+rcpm: rcpm@1e34040 {
+	compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+	reg = <0x0 0x1e34040 0x0 0x18>;
+	#fsl,rcpm-wakeup-cells = <6>;
+};
+
+ftm_alarm0: timer@2800000 {
+	compatible = "fsl,ls1088a-ftm-alarm";
+	reg = <0x0 0x2800000 0x0 0x10000>;
+	fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+	interrupts = <0 44 4>;
+};