[2/6] usb: add a hcd_uses_dma helper
diff mbox series

Message ID 20190811080520.21712-3-hch@lst.de
State Superseded
Headers show
Series
  • [1/6] usb: don't create dma pools for HCDs with a localmem_pool
Related show

Checks

Context Check Description
snowpatch_ozlabs/checkpatch success total: 0 errors, 0 warnings, 0 checks, 69 lines checked
snowpatch_ozlabs/apply_patch success Successfully applied on branch next (da206bd46848568e1aaf35f00e2d78bf9bc94f95)

Commit Message

Christoph Hellwig Aug. 11, 2019, 8:05 a.m. UTC
The USB buffer allocation code is the only place in the usb core (and in
fact the whole kernel) that uses is_device_dma_capable, while the URB
mapping code uses the uses_dma flag in struct usb_bus.  Switch the buffer
allocation to use the uses_dma flag used by the rest of the USB code,
and create a helper in hcd.h that checks this flag as well as the
CONFIG_HAS_DMA to simplify the caller a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/usb/core/buffer.c | 10 +++-------
 drivers/usb/core/hcd.c    |  4 ++--
 drivers/usb/dwc2/hcd.c    |  2 +-
 include/linux/usb.h       |  2 +-
 include/linux/usb/hcd.h   |  3 +++
 5 files changed, 10 insertions(+), 11 deletions(-)

Patch
diff mbox series

diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index 1a5b3dcae930..6cf22c27f2d2 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -66,9 +66,7 @@  int hcd_buffer_create(struct usb_hcd *hcd)
 	char		name[16];
 	int		i, size;
 
-	if (hcd->localmem_pool ||
-	    !IS_ENABLED(CONFIG_HAS_DMA) ||
-	    !is_device_dma_capable(hcd->self.sysdev))
+	if (hcd->localmem_pool || !hcd_uses_dma(hcd))
 		return 0;
 
 	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
@@ -129,8 +127,7 @@  void *hcd_buffer_alloc(
 		return gen_pool_dma_alloc(hcd->localmem_pool, size, dma);
 
 	/* some USB hosts just use PIO */
-	if (!IS_ENABLED(CONFIG_HAS_DMA) ||
-	    !is_device_dma_capable(bus->sysdev)) {
+	if (!hcd_uses_dma(hcd)) {
 		*dma = ~(dma_addr_t) 0;
 		return kmalloc(size, mem_flags);
 	}
@@ -160,8 +157,7 @@  void hcd_buffer_free(
 		return;
 	}
 
-	if (!IS_ENABLED(CONFIG_HAS_DMA) ||
-	    !is_device_dma_capable(bus->sysdev)) {
+	if (!hcd_uses_dma(hcd)) {
 		kfree(addr);
 		return;
 	}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 2ccbc2f83570..8592c0344fe8 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1412,7 +1412,7 @@  int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
 		if (hcd->self.uses_pio_for_control)
 			return ret;
-		if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
+		if (hcd_uses_dma(hcd)) {
 			if (is_vmalloc_addr(urb->setup_packet)) {
 				WARN_ONCE(1, "setup packet is not dma capable\n");
 				return -EAGAIN;
@@ -1446,7 +1446,7 @@  int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 	if (urb->transfer_buffer_length != 0
 	    && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
-		if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
+		if (hcd_uses_dma(hcd)) {
 			if (urb->num_sgs) {
 				int n;
 
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index ee144ff8af5b..111787a137ee 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -4608,7 +4608,7 @@  static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 
 	buf = urb->transfer_buffer;
 
-	if (hcd->self.uses_dma) {
+	if (hcd_uses_dma(hcd)) {
 		if (!buf && (urb->transfer_dma & 3)) {
 			dev_err(hsotg->dev,
 				"%s: unaligned transfer with no transfer_buffer",
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 83d35d993e8c..e87826e23d59 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1457,7 +1457,7 @@  typedef void (*usb_complete_t)(struct urb *);
  * field rather than determining a dma address themselves.
  *
  * Note that transfer_buffer must still be set if the controller
- * does not support DMA (as indicated by bus.uses_dma) and when talking
+ * does not support DMA (as indicated by hcd_uses_dma()) and when talking
  * to root hub. If you have to trasfer between highmem zone and the device
  * on such controller, create a bounce buffer or bail out with an error.
  * If transfer_buffer cannot be set (is in highmem) and the controller is DMA
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index bab27ccc8ff5..a20e7815d814 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -422,6 +422,9 @@  static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd,
 	return hcd->high_prio_bh.completing_ep == ep;
 }
 
+#define hcd_uses_dma(hcd) \
+	(IS_ENABLED(CONFIG_HAS_DMA) && (hcd)->self.uses_dma)
+
 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
 extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
 		int status);