[03/16] gpio: remove ks8695 driver
diff mbox series

Message ID 20190809202749.742267-4-arnd@arndb.de
State New
Headers show
Series
  • ARM: remove ks8695 and w90x900 platforms
Related show

Commit Message

Arnd Bergmann Aug. 9, 2019, 8:27 p.m. UTC
The platform is getting removed, so there are no remaining
users of this driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/gpio/Makefile      |   1 -
 drivers/gpio/gpio-ks8695.c | 284 -------------------------------------
 2 files changed, 285 deletions(-)
 delete mode 100644 drivers/gpio/gpio-ks8695.c

Comments

Linus Walleij Aug. 10, 2019, 9:03 a.m. UTC | #1
On Fri, Aug 9, 2019 at 10:28 PM Arnd Bergmann <arnd@arndb.de> wrote:

> The platform is getting removed, so there are no remaining
> users of this driver.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Patch applied. Thanks for cleaning out this old cruft.

Yours,
Linus Walleij

Patch
diff mbox series

diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index a4e91175c708..65d74084c9b2 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -67,7 +67,6 @@  obj-$(CONFIG_GPIO_IT87)			+= gpio-it87.o
 obj-$(CONFIG_GPIO_IXP4XX)		+= gpio-ixp4xx.o
 obj-$(CONFIG_GPIO_JANZ_TTL)		+= gpio-janz-ttl.o
 obj-$(CONFIG_GPIO_KEMPLD)		+= gpio-kempld.o
-obj-$(CONFIG_ARCH_KS8695)		+= gpio-ks8695.o
 obj-$(CONFIG_GPIO_LOONGSON1)		+= gpio-loongson1.o
 obj-$(CONFIG_GPIO_LOONGSON)		+= gpio-loongson.o
 obj-$(CONFIG_GPIO_LP3943)		+= gpio-lp3943.o
diff --git a/drivers/gpio/gpio-ks8695.c b/drivers/gpio/gpio-ks8695.c
deleted file mode 100644
index a0f87c124894..000000000000
--- a/drivers/gpio/gpio-ks8695.c
+++ /dev/null
@@ -1,284 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ks8695/gpio.c
- *
- * Copyright (C) 2006 Andrew Victor
- * Updated to GPIOLIB, Copyright 2008 Simtec Electronics
- *                     Daniel Silverstone <dsilvers@simtec.co.uk>
- */
-#include <linux/gpio/driver.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-ks8695.h>
-
-/*
- * Configure a GPIO line for either GPIO function, or its internal
- * function (Interrupt, Timer, etc).
- */
-static void ks8695_gpio_mode(unsigned int pin, short gpio)
-{
-	unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
-	unsigned long x, flags;
-
-	if (pin > KS8695_GPIO_5)	/* only GPIO 0..5 have internal functions */
-		return;
-
-	local_irq_save(flags);
-
-	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
-	if (gpio)			/* GPIO: set bit to 0 */
-		x &= ~enable[pin];
-	else				/* Internal function: set bit to 1 */
-		x |= enable[pin];
-	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC);
-
-	local_irq_restore(flags);
-}
-
-
-static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 };
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
-{
-	unsigned long x, flags;
-
-	if (pin > KS8695_GPIO_3)	/* only GPIO 0..3 can generate IRQ */
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	/* set pin as input */
-	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	x &= ~IOPM(pin);
-	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
-
-	local_irq_restore(flags);
-
-	/* Set IRQ triggering type */
-	irq_set_irq_type(gpio_irq[pin], type);
-
-	/* enable interrupt mode */
-	ks8695_gpio_mode(pin, 0);
-
-	return 0;
-}
-EXPORT_SYMBOL(ks8695_gpio_interrupt);
-
-
-
-/* .... Generic GPIO interface .............................................. */
-
-/*
- * Configure the GPIO line as an input.
- */
-static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
-{
-	unsigned long x, flags;
-
-	if (pin > KS8695_GPIO_15)
-		return -EINVAL;
-
-	/* set pin to GPIO mode */
-	ks8695_gpio_mode(pin, 1);
-
-	local_irq_save(flags);
-
-	/* set pin as input */
-	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	x &= ~IOPM(pin);
-	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-
-/*
- * Configure the GPIO line as an output, with default state.
- */
-static int ks8695_gpio_direction_output(struct gpio_chip *gc,
-					unsigned int pin, int state)
-{
-	unsigned long x, flags;
-
-	if (pin > KS8695_GPIO_15)
-		return -EINVAL;
-
-	/* set pin to GPIO mode */
-	ks8695_gpio_mode(pin, 1);
-
-	local_irq_save(flags);
-
-	/* set line state */
-	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
-	if (state)
-		x |= IOPD(pin);
-	else
-		x &= ~IOPD(pin);
-	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
-
-	/* set pin as output */
-	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	x |= IOPM(pin);
-	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-
-/*
- * Set the state of an output GPIO line.
- */
-static void ks8695_gpio_set_value(struct gpio_chip *gc,
-				  unsigned int pin, int state)
-{
-	unsigned long x, flags;
-
-	if (pin > KS8695_GPIO_15)
-		return;
-
-	local_irq_save(flags);
-
-	/* set output line state */
-	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
-	if (state)
-		x |= IOPD(pin);
-	else
-		x &= ~IOPD(pin);
-	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
-
-	local_irq_restore(flags);
-}
-
-
-/*
- * Read the state of a GPIO line.
- */
-static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
-{
-	unsigned long x;
-
-	if (pin > KS8695_GPIO_15)
-		return -EINVAL;
-
-	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
-	return (x & IOPD(pin)) != 0;
-}
-
-
-/*
- * Map GPIO line to IRQ number.
- */
-static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
-{
-	if (pin > KS8695_GPIO_3)	/* only GPIO 0..3 can generate IRQ */
-		return -EINVAL;
-
-	return gpio_irq[pin];
-}
-
-/* GPIOLIB interface */
-
-static struct gpio_chip ks8695_gpio_chip = {
-	.label			= "KS8695",
-	.direction_input	= ks8695_gpio_direction_input,
-	.direction_output	= ks8695_gpio_direction_output,
-	.get			= ks8695_gpio_get_value,
-	.set			= ks8695_gpio_set_value,
-	.to_irq			= ks8695_gpio_to_irq,
-	.base			= 0,
-	.ngpio			= 16,
-	.can_sleep		= false,
-};
-
-/* Register the GPIOs */
-void ks8695_register_gpios(void)
-{
-	if (gpiochip_add_data(&ks8695_gpio_chip, NULL))
-		printk(KERN_ERR "Unable to register core GPIOs\n");
-}
-
-/* .... Debug interface ..................................................... */
-
-#ifdef CONFIG_DEBUG_FS
-
-static int ks8695_gpio_show(struct seq_file *s, void *unused)
-{
-	unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
-	unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
-	unsigned long mode, ctrl, data;
-	int i;
-
-	mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
-	data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
-
-	seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
-
-	for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
-		seq_printf(s, "%i:\t", i);
-
-		seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
-
-		if (i <= KS8695_GPIO_3) {
-			if (ctrl & enable[i]) {
-				seq_printf(s, "EXT%i ", i);
-
-				switch ((ctrl & intmask[i]) >> (4 * i)) {
-				case IOPC_TM_LOW:
-					seq_printf(s, "(Low)");		break;
-				case IOPC_TM_HIGH:
-					seq_printf(s, "(High)");	break;
-				case IOPC_TM_RISING:
-					seq_printf(s, "(Rising)");	break;
-				case IOPC_TM_FALLING:
-					seq_printf(s, "(Falling)");	break;
-				case IOPC_TM_EDGE:
-					seq_printf(s, "(Edges)");	break;
-				}
-			} else
-				seq_printf(s, "GPIO\t");
-		} else if (i <= KS8695_GPIO_5) {
-			if (ctrl & enable[i])
-				seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
-			else
-				seq_printf(s, "GPIO\t");
-		} else {
-			seq_printf(s, "GPIO\t");
-		}
-
-		seq_printf(s, "\t");
-
-		seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
-	}
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ks8695_gpio);
-
-static int __init ks8695_gpio_debugfs_init(void)
-{
-	/* /sys/kernel/debug/ks8695_gpio */
-	debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL,
-				&ks8695_gpio_fops);
-	return 0;
-}
-postcore_initcall(ks8695_gpio_debugfs_init);
-
-#endif