[v7,17/20] soc/tegra: pmc: Configure core power request polarity
diff mbox series

Message ID 1564607463-28802-18-git-send-email-skomatineni@nvidia.com
State New
Headers show
Series
  • SC7 entry and exit support for Tegra210
Related show

Commit Message

Sowjanya Komatineni July 31, 2019, 9:11 p.m. UTC
This patch configures polarity of the core power request signal
in PMC control register based on the device tree property.

PMC asserts and de-asserts power request signal based on it polarity
when it need to power-up and power-down the core rail during SC7.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 drivers/soc/tegra/pmc.c | 6 ++++++
 1 file changed, 6 insertions(+)

Patch
diff mbox series

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 3aa71c28a10a..e013ada7e4e9 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -56,6 +56,7 @@ 
 #define  PMC_CNTRL_SIDE_EFFECT_LP0	BIT(14) /* LP0 when CPU pwr gated */
 #define  PMC_CNTRL_SYSCLK_OE		BIT(11) /* system clock enable */
 #define  PMC_CNTRL_SYSCLK_POLARITY	BIT(10) /* sys clk polarity */
+#define  PMC_CNTRL_PWRREQ_POLARITY	BIT(8)
 #define  PMC_CNTRL_MAIN_RST		BIT(4)
 
 #define PMC_WAKE_MASK			0x0c
@@ -2290,6 +2291,11 @@  static void tegra20_pmc_init(struct tegra_pmc *pmc)
 	else
 		value |= PMC_CNTRL_SYSCLK_POLARITY;
 
+	if (pmc->corereq_high)
+		value &= ~PMC_CNTRL_PWRREQ_POLARITY;
+	else
+		value |= PMC_CNTRL_PWRREQ_POLARITY;
+
 	/* configure the output polarity while the request is tristated */
 	tegra_pmc_writel(pmc, value, PMC_CNTRL);