@@ -40,69 +40,6 @@
#define SPI_NOR_MAX_ID_LEN 6
#define SPI_NOR_MAX_ADDR_WIDTH 4
-struct spi_nor_read_command {
- u8 num_mode_clocks;
- u8 num_wait_states;
- u8 opcode;
- enum spi_nor_protocol proto;
-};
-
-struct spi_nor_pp_command {
- u8 opcode;
- enum spi_nor_protocol proto;
-};
-
-enum spi_nor_read_command_index {
- SNOR_CMD_READ,
- SNOR_CMD_READ_FAST,
- SNOR_CMD_READ_1_1_1_DTR,
-
- /* Dual SPI */
- SNOR_CMD_READ_1_1_2,
- SNOR_CMD_READ_1_2_2,
- SNOR_CMD_READ_2_2_2,
- SNOR_CMD_READ_1_2_2_DTR,
-
- /* Quad SPI */
- SNOR_CMD_READ_1_1_4,
- SNOR_CMD_READ_1_4_4,
- SNOR_CMD_READ_4_4_4,
- SNOR_CMD_READ_1_4_4_DTR,
-
- /* Octal SPI */
- SNOR_CMD_READ_1_1_8,
- SNOR_CMD_READ_1_8_8,
- SNOR_CMD_READ_8_8_8,
- SNOR_CMD_READ_1_8_8_DTR,
-
- SNOR_CMD_READ_MAX
-};
-
-enum spi_nor_pp_command_index {
- SNOR_CMD_PP,
-
- /* Quad SPI */
- SNOR_CMD_PP_1_1_4,
- SNOR_CMD_PP_1_4_4,
- SNOR_CMD_PP_4_4_4,
-
- /* Octal SPI */
- SNOR_CMD_PP_1_1_8,
- SNOR_CMD_PP_1_8_8,
- SNOR_CMD_PP_8_8_8,
-
- SNOR_CMD_PP_MAX
-};
-
-struct spi_nor_flash_parameter {
- u64 size;
- u32 page_size;
-
- struct spi_nor_hwcaps hwcaps;
- struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
- struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
-};
-
struct sfdp_parameter_header {
u8 id_lsb;
u8 minor;
@@ -197,6 +197,144 @@ enum spi_nor_protocol {
SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8),
};
+/**
+ * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
+ * supported by the SPI controller (bus master).
+ * @mask: the bitmask listing all the supported hw capabilies
+ */
+struct spi_nor_hwcaps {
+ u32 mask;
+};
+
+/*
+ *(Fast) Read capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * As a matter of performances, it is relevant to use Octal SPI protocols first,
+ * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
+ * (Slow) Read.
+ */
+#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0)
+#define SNOR_HWCAPS_READ BIT(0)
+#define SNOR_HWCAPS_READ_FAST BIT(1)
+#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
+
+#define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3)
+#define SNOR_HWCAPS_READ_1_1_2 BIT(3)
+#define SNOR_HWCAPS_READ_1_2_2 BIT(4)
+#define SNOR_HWCAPS_READ_2_2_2 BIT(5)
+#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6)
+
+#define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7)
+#define SNOR_HWCAPS_READ_1_1_4 BIT(7)
+#define SNOR_HWCAPS_READ_1_4_4 BIT(8)
+#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
+#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
+
+#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11)
+#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
+#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
+#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
+#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14)
+
+/*
+ * Page Program capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
+ * legacy SPI 1-1-1 protocol.
+ * Note that Dual Page Programs are not supported because there is no existing
+ * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
+ * implements such commands.
+ */
+#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
+#define SNOR_HWCAPS_PP BIT(16)
+
+#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
+#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
+#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
+#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
+
+#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20)
+#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
+#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
+#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
+
+#define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \
+ SNOR_HWCAPS_READ_4_4_4 | \
+ SNOR_HWCAPS_READ_8_8_8 | \
+ SNOR_HWCAPS_PP_4_4_4 | \
+ SNOR_HWCAPS_PP_8_8_8)
+
+#define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \
+ SNOR_HWCAPS_READ_1_2_2_DTR | \
+ SNOR_HWCAPS_READ_1_4_4_DTR | \
+ SNOR_HWCAPS_READ_1_8_8_DTR)
+
+#define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \
+ SNOR_HWCAPS_PP_MASK)
+
+struct spi_nor_read_command {
+ u8 num_mode_clocks;
+ u8 num_wait_states;
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+struct spi_nor_pp_command {
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+enum spi_nor_read_command_index {
+ SNOR_CMD_READ,
+ SNOR_CMD_READ_FAST,
+ SNOR_CMD_READ_1_1_1_DTR,
+
+ /* Dual SPI */
+ SNOR_CMD_READ_1_1_2,
+ SNOR_CMD_READ_1_2_2,
+ SNOR_CMD_READ_2_2_2,
+ SNOR_CMD_READ_1_2_2_DTR,
+
+ /* Quad SPI */
+ SNOR_CMD_READ_1_1_4,
+ SNOR_CMD_READ_1_4_4,
+ SNOR_CMD_READ_4_4_4,
+ SNOR_CMD_READ_1_4_4_DTR,
+
+ /* Octal SPI */
+ SNOR_CMD_READ_1_1_8,
+ SNOR_CMD_READ_1_8_8,
+ SNOR_CMD_READ_8_8_8,
+ SNOR_CMD_READ_1_8_8_DTR,
+
+ SNOR_CMD_READ_MAX
+};
+
+enum spi_nor_pp_command_index {
+ SNOR_CMD_PP,
+
+ /* Quad SPI */
+ SNOR_CMD_PP_1_1_4,
+ SNOR_CMD_PP_1_4_4,
+ SNOR_CMD_PP_4_4_4,
+
+ /* Octal SPI */
+ SNOR_CMD_PP_1_1_8,
+ SNOR_CMD_PP_1_8_8,
+ SNOR_CMD_PP_8_8_8,
+
+ SNOR_CMD_PP_MAX
+};
+
+struct spi_nor_flash_parameter {
+ u64 size;
+ u32 page_size;
+
+ struct spi_nor_hwcaps hwcaps;
+ struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
+ struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
+};
+
static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto)
{
return !!(proto & SNOR_PROTO_IS_DTR);
@@ -384,6 +522,7 @@ struct flash_info;
* useful when pagesize is not a power-of-2
* @disable_write_protection: [FLASH-SPECIFIC] disable write protection during
* power-up
+ * @setup: [FLASH-SPECIFIC] configure the spi-nor memory
* completely locked
* @priv: the private data
*/
@@ -427,6 +566,9 @@ struct spi_nor {
int (*set_4byte)(struct spi_nor *nor, bool enable);
u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
int (*disable_write_protection)(struct spi_nor *nor);
+ int (*setup)(struct spi_nor *nor,
+ const struct spi_nor_flash_parameter *params,
+ const struct spi_nor_hwcaps *hwcaps);
const struct spi_nor_locking_ops *locking_ops;
@@ -486,81 +628,6 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
}
/**
- * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
- * supported by the SPI controller (bus master).
- * @mask: the bitmask listing all the supported hw capabilies
- */
-struct spi_nor_hwcaps {
- u32 mask;
-};
-
-/*
- *(Fast) Read capabilities.
- * MUST be ordered by priority: the higher bit position, the higher priority.
- * As a matter of performances, it is relevant to use Octal SPI protocols first,
- * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
- * (Slow) Read.
- */
-#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0)
-#define SNOR_HWCAPS_READ BIT(0)
-#define SNOR_HWCAPS_READ_FAST BIT(1)
-#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
-
-#define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3)
-#define SNOR_HWCAPS_READ_1_1_2 BIT(3)
-#define SNOR_HWCAPS_READ_1_2_2 BIT(4)
-#define SNOR_HWCAPS_READ_2_2_2 BIT(5)
-#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6)
-
-#define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7)
-#define SNOR_HWCAPS_READ_1_1_4 BIT(7)
-#define SNOR_HWCAPS_READ_1_4_4 BIT(8)
-#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
-#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
-
-#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11)
-#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
-#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
-#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
-#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14)
-
-/*
- * Page Program capabilities.
- * MUST be ordered by priority: the higher bit position, the higher priority.
- * Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
- * legacy SPI 1-1-1 protocol.
- * Note that Dual Page Programs are not supported because there is no existing
- * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
- * implements such commands.
- */
-#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
-#define SNOR_HWCAPS_PP BIT(16)
-
-#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
-#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
-#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
-#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
-
-#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20)
-#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
-#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
-#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
-
-#define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \
- SNOR_HWCAPS_READ_4_4_4 | \
- SNOR_HWCAPS_READ_8_8_8 | \
- SNOR_HWCAPS_PP_4_4_4 | \
- SNOR_HWCAPS_PP_8_8_8)
-
-#define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \
- SNOR_HWCAPS_READ_1_2_2_DTR | \
- SNOR_HWCAPS_READ_1_4_4_DTR | \
- SNOR_HWCAPS_READ_1_8_8_DTR)
-
-#define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \
- SNOR_HWCAPS_PP_MASK)
-
-/**
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure
* @name: the chip type name