[v3,5/9] powerpc/eeh: EEH for pSeries hot plug
diff mbox series

Message ID 291106c5283d7b54a4010219de13d8756350fe00.1563853440.git.sbobroff@linux.ibm.com
State Superseded
Headers show
Series
  • Untitled series #120852
Related show

Checks

Context Check Description
snowpatch_ozlabs/checkpatch success total: 0 errors, 0 warnings, 0 checks, 163 lines checked
snowpatch_ozlabs/apply_patch success Successfully applied on branch next (f3365d1a959d5c6527efe3d38276acc9b58e3f3f)

Commit Message

Sam Bobroff July 23, 2019, 3:44 a.m. UTC
On PowerNV and pSeries, devices currently acquire EEH support from
several different places: Boot-time devices from eeh_probe_devices()
and eeh_addr_cache_build(), Virtual Function devices from the pcibios
bus add device hooks and hot plugged devices from pci_hp_add_devices()
(with other platforms using other methods as well).  Unfortunately,
pSeries machines currently discover hot plugged devices using
pci_rescan_bus(), not pci_hp_add_devices(), and so those devices do
not receive EEH support.

Rather than adding another case for pci_rescan_bus(), this change
widens the scope of the pcibios bus add device hooks so that they can
handle all devices. As a side effect this also supports devices
discovered after manually rescanning via /sys/bus/pci/rescan.

Note that on PowerNV, this change allows the EEH subsystem to become
enabled after boot as long as it has not been forced off, which was
not previously possible (it was already possible on pSeries).

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
---
 arch/powerpc/kernel/eeh.c                    |  2 +-
 arch/powerpc/kernel/of_platform.c            |  3 +-
 arch/powerpc/platforms/powernv/eeh-powernv.c | 39 +++++++++-----
 arch/powerpc/platforms/pseries/eeh_pseries.c | 54 ++++++++++----------
 4 files changed, 56 insertions(+), 42 deletions(-)

Patch
diff mbox series

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index ca8b0c58a6a7..87edac6f2fd9 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1272,7 +1272,7 @@  void eeh_add_device_late(struct pci_dev *dev)
 	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 
-	if (!dev || !eeh_enabled())
+	if (!dev)
 		return;
 
 	pr_debug("EEH: Adding device %s\n", pci_name(dev));
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 427fc22f72b6..11c807468ab5 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -81,7 +81,8 @@  static int of_pci_phb_probe(struct platform_device *dev)
 	pcibios_claim_one_bus(phb->bus);
 
 	/* Finish EEH setup */
-	eeh_add_device_tree_late(phb->bus);
+	if (!eeh_has_flag(EEH_FORCE_DISABLED))
+		eeh_add_device_tree_late(phb->bus);
 
 	/* Add probed PCI devices to the device model */
 	pci_bus_add_devices(phb->bus);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 629f9390d9af..77cc2f51c2ea 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -43,7 +43,7 @@  void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
 {
 	struct pci_dn *pdn = pci_get_pdn(pdev);
 
-	if (!pdev->is_virtfn)
+	if (eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
 	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
@@ -222,6 +222,25 @@  static const struct file_operations eeh_tree_state_debugfs_ops = {
 
 #endif /* CONFIG_DEBUG_FS */
 
+void pnv_eeh_enable_phbs(void)
+{
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+
+	list_for_each_entry(hose, &hose_list, list_node) {
+		phb = hose->private_data;
+		/*
+		 * If EEH is enabled, we're going to rely on that.
+		 * Otherwise, we restore to conventional mechanism
+		 * to clear frozen PE during PCI config access.
+		 */
+		if (eeh_enabled())
+			phb->flags |= PNV_PHB_FLAG_EEH;
+		else
+			phb->flags &= ~PNV_PHB_FLAG_EEH;
+	}
+}
+
 /**
  * pnv_eeh_post_init - EEH platform dependent post initialization
  *
@@ -260,19 +279,11 @@  int pnv_eeh_post_init(void)
 	if (!eeh_enabled())
 		disable_irq(eeh_event_irq);
 
+	pnv_eeh_enable_phbs();
+
 	list_for_each_entry(hose, &hose_list, list_node) {
 		phb = hose->private_data;
 
-		/*
-		 * If EEH is enabled, we're going to rely on that.
-		 * Otherwise, we restore to conventional mechanism
-		 * to clear frozen PE during PCI config access.
-		 */
-		if (eeh_enabled())
-			phb->flags |= PNV_PHB_FLAG_EEH;
-		else
-			phb->flags &= ~PNV_PHB_FLAG_EEH;
-
 		/* Create debugfs entries */
 #ifdef CONFIG_DEBUG_FS
 		if (phb->has_dbgfs || !phb->dbgfs)
@@ -483,7 +494,11 @@  static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	 * Enable EEH explicitly so that we will do EEH check
 	 * while accessing I/O stuff
 	 */
-	eeh_add_flag(EEH_ENABLED);
+	if (!eeh_has_flag(EEH_ENABLED)) {
+		enable_irq(eeh_event_irq);
+		pnv_eeh_enable_phbs();
+		eeh_add_flag(EEH_ENABLED);
+	}
 
 	/* Save memory bars */
 	eeh_save_bars(edev);
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 31733f6d642c..96ad41fbf96b 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -42,44 +42,44 @@  static int ibm_get_config_addr_info;
 static int ibm_get_config_addr_info2;
 static int ibm_configure_pe;
 
-#ifdef CONFIG_PCI_IOV
 void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 {
 	struct pci_dn *pdn = pci_get_pdn(pdev);
-	struct pci_dn *physfn_pdn;
-	struct eeh_dev *edev;
 
-	if (!pdev->is_virtfn)
+	if (eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
 	pr_debug("%s: EEH: Setting up device %s.\n", __func__, pci_name(pdev));
+#ifdef CONFIG_PCI_IOV
+	if (pdev->is_virtfn) {
+		struct pci_dn *physfn_pdn;
 
-	pdn->device_id  =  pdev->device;
-	pdn->vendor_id  =  pdev->vendor;
-	pdn->class_code =  pdev->class;
-	/*
-	 * Last allow unfreeze return code used for retrieval
-	 * by user space in eeh-sysfs to show the last command
-	 * completion from platform.
-	 */
-	pdn->last_allow_rc =  0;
-	physfn_pdn      =  pci_get_pdn(pdev->physfn);
-	pdn->pe_number  =  physfn_pdn->pe_num_map[pdn->vf_index];
-	edev = pdn_to_eeh_dev(pdn);
-
-	/*
-	 * The following operations will fail if VF's sysfs files
-	 * aren't created or its resources aren't finalized.
-	 */
+		pdn->device_id  =  pdev->device;
+		pdn->vendor_id  =  pdev->vendor;
+		pdn->class_code =  pdev->class;
+		/*
+		 * Last allow unfreeze return code used for retrieval
+		 * by user space in eeh-sysfs to show the last command
+		 * completion from platform.
+		 */
+		pdn->last_allow_rc =  0;
+		physfn_pdn      =  pci_get_pdn(pdev->physfn);
+		pdn->pe_number  =  physfn_pdn->pe_num_map[pdn->vf_index];
+	}
+#endif
 	eeh_add_device_early(pdn);
 	eeh_add_device_late(pdev);
-	edev->pe_config_addr =  (pdn->busno << 16) | (pdn->devfn << 8);
-	eeh_rmv_from_parent_pe(edev); /* Remove as it is adding to bus pe */
-	eeh_add_to_parent_pe(edev);   /* Add as VF PE type */
-	eeh_sysfs_add_device(pdev);
+#ifdef CONFIG_PCI_IOV
+	if (pdev->is_virtfn) {
+		struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
 
-}
+		edev->pe_config_addr =  (pdn->busno << 16) | (pdn->devfn << 8);
+		eeh_rmv_from_parent_pe(edev); /* Remove as it is adding to bus pe */
+		eeh_add_to_parent_pe(edev);   /* Add as VF PE type */
+	}
 #endif
+	eeh_sysfs_add_device(pdev);
+}
 
 /*
  * Buffer for reporting slot-error-detail rtas calls. Its here
@@ -146,10 +146,8 @@  static int pseries_eeh_init(void)
 	/* Set EEH probe mode */
 	eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG);
 
-#ifdef CONFIG_PCI_IOV
 	/* Set EEH machine dependent code */
 	ppc_md.pcibios_bus_add_device = pseries_pcibios_bus_add_device;
-#endif
 
 	return 0;
 }