diff mbox series

[U-Boot,3/4] configs: ls2088aqds: Enable DM support for ds3231 rtc

Message ID 20190724025904.469-3-chuanhua.han@nxp.com
State Superseded
Delegated to: Prabhakar Kushwaha
Headers show
Series [U-Boot,1/4] rtc: ds3232/ds3231: Add support to generate 32KHz output for driver module | expand

Commit Message

Chuanhua Han July 24, 2019, 2:59 a.m. UTC 
Enable related configs on all ls2088aqds boards to support ds3231
rtc DM function.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
---
depends on:
	- http://patchwork.ozlabs.org/project/uboot/list/?series=118772
	- http://patchwork.ozlabs.org/project/uboot/list/?series=117226

 configs/ls2088aqds_tfa_defconfig | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig
index e798c59..95921b0 100644
--- a/configs/ls2088aqds_tfa_defconfig
+++ b/configs/ls2088aqds_tfa_defconfig
@@ -1,12 +1,12 @@ 
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080AQDS=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_TFABOOT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -63,3 +63,11 @@  CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_GPIO=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_DM_RTC=y
+CONFIG_DS3231_BUS_NUM=0