| Message ID | 20190723100144.57435-10-alice.michael@intel.com |
|---|---|
| State | Accepted |
| Delegated to: | Jeff Kirsher |
| Headers | show |
| Series | [next,S8,01/12] i40e: fix shifts of signed values | expand |
ACK -----Original Message----- From: Michael, Alice Sent: Tuesday, July 23, 2019 12:02 PM To: Michael, Alice <alice.michael@intel.com>; intel-wired-lan@lists.osuosl.org Cc: Kwapulinski, Piotr <piotr.kwapulinski@intel.com> Subject: [next PATCH S8 10/12] i40e: allow reset in recovery mode From: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Driver waits after issuing a reset. When a reset takes too long a driver gives up. Implemented by invoking PF reset in a loop. After defined number of unsuccessful PF reset trials it returns error. Without this patch PF reset fails when NIC is in recovery mode. Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> --- drivers/net/ethernet/intel/i40e/i40e_main.c | 67 ++++++++++++++++++--- 1 file changed, 60 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 8d6b9515b595..fdf43d87e983 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -14564,6 +14564,51 @@ static bool i40e_check_recovery_mode(struct i40e_pf *pf) return false; } +/** + * i40e_pf_loop_reset - perform reset in a loop. + * @pf: board private structure + * + * This function is useful when a NIC is about to enter recovery mode. + * When a NIC's internal data structures are corrupted the NIC's + * firmware is going to enter recovery mode. + * Right after a POR it takes about 7 minutes for firmware to enter + * recovery mode. Until that time a NIC is in some kind of intermediate + * state. After that time period the NIC almost surely enters + * recovery mode. The only way for a driver to detect intermediate + * state is to issue a series of pf-resets and check a return value. + * If a PF reset returns success then the firmware could be in recovery + * mode so the caller of this code needs to check for recovery mode + * if this function returns success. There is a little chance that + * firmware will hang in intermediate state forever. + * Since waiting 7 minutes is quite a lot of time this function waits + * 10 seconds and then gives up by returning an error. + * + * Return 0 on success, negative on failure. + **/ +static i40e_status i40e_pf_loop_reset(struct i40e_pf *pf) { + const unsigned short MAX_CNT = 1000; + const unsigned short MSECS = 10; + struct i40e_hw *hw = &pf->hw; + i40e_status ret; + int cnt; + + for (cnt = 0; cnt < MAX_CNT; ++cnt) { + ret = i40e_pf_reset(hw); + if (!ret) + break; + msleep(MSECS); + } + + if (cnt == MAX_CNT) { + dev_info(&pf->pdev->dev, "PF reset failed: %d\n", ret); + return ret; + } + + pf->pfr_count++; + return ret; +} + /** * i40e_init_recovery_mode - initialize subsystems needed in recovery mode * @pf: board private structure @@ -14792,14 +14837,22 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* Reset here to make sure all is clean and to define PF 'n' */ i40e_clear_hw(hw); - if (!i40e_check_recovery_mode(pf)) { - err = i40e_pf_reset(hw); - if (err) { - dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err); - goto err_pf_reset; - } - pf->pfr_count++; + + err = i40e_set_mac_type(hw); + if (err) { + dev_warn(&pdev->dev, "unidentified MAC or BLANK NVM: %d\n", + err); + goto err_pf_reset; } + + err = i40e_pf_loop_reset(pf); + if (err) { + dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err); + goto err_pf_reset; + } + + i40e_check_recovery_mode(pf); + hw->aq.num_arq_entries = I40E_AQ_LEN; hw->aq.num_asq_entries = I40E_AQ_LEN; hw->aq.arq_buf_size = I40E_MAX_AQ_BUF_SIZE; -- 2.21.0 -------------------------------------------------------------------- Intel Technology Poland sp. z o.o. ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 | Kapital zakladowy 200.000 PLN. Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek przegladanie lub rozpowszechnianie jest zabronione. This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by others is strictly prohibited.
> -----Original Message----- > From: Intel-wired-lan [mailto:intel-wired-lan-bounces@osuosl.org] On > Behalf Of Alice Michael > Sent: Tuesday, July 23, 2019 3:02 AM > To: Michael, Alice <alice.michael@intel.com>; intel-wired- > lan@lists.osuosl.org > Cc: Kwapulinski, Piotr <piotr.kwapulinski@intel.com> > Subject: [Intel-wired-lan] [next PATCH S8 10/12] i40e: allow reset in recovery > mode > > From: Piotr Kwapulinski <piotr.kwapulinski@intel.com> > > Driver waits after issuing a reset. When a reset takes too long a driver gives > up. Implemented by invoking PF reset in a loop. After defined number of > unsuccessful PF reset trials it returns error. > Without this patch PF reset fails when NIC is in recovery mode. > > Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> > --- > drivers/net/ethernet/intel/i40e/i40e_main.c | 67 ++++++++++++++++++--- > 1 file changed, 60 insertions(+), 7 deletions(-) Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 8d6b9515b595..fdf43d87e983 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -14564,6 +14564,51 @@ static bool i40e_check_recovery_mode(struct i40e_pf *pf) return false; } +/** + * i40e_pf_loop_reset - perform reset in a loop. + * @pf: board private structure + * + * This function is useful when a NIC is about to enter recovery mode. + * When a NIC's internal data structures are corrupted the NIC's + * firmware is going to enter recovery mode. + * Right after a POR it takes about 7 minutes for firmware to enter + * recovery mode. Until that time a NIC is in some kind of intermediate + * state. After that time period the NIC almost surely enters + * recovery mode. The only way for a driver to detect intermediate + * state is to issue a series of pf-resets and check a return value. + * If a PF reset returns success then the firmware could be in recovery + * mode so the caller of this code needs to check for recovery mode + * if this function returns success. There is a little chance that + * firmware will hang in intermediate state forever. + * Since waiting 7 minutes is quite a lot of time this function waits + * 10 seconds and then gives up by returning an error. + * + * Return 0 on success, negative on failure. + **/ +static i40e_status i40e_pf_loop_reset(struct i40e_pf *pf) +{ + const unsigned short MAX_CNT = 1000; + const unsigned short MSECS = 10; + struct i40e_hw *hw = &pf->hw; + i40e_status ret; + int cnt; + + for (cnt = 0; cnt < MAX_CNT; ++cnt) { + ret = i40e_pf_reset(hw); + if (!ret) + break; + msleep(MSECS); + } + + if (cnt == MAX_CNT) { + dev_info(&pf->pdev->dev, "PF reset failed: %d\n", ret); + return ret; + } + + pf->pfr_count++; + return ret; +} + /** * i40e_init_recovery_mode - initialize subsystems needed in recovery mode * @pf: board private structure @@ -14792,14 +14837,22 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* Reset here to make sure all is clean and to define PF 'n' */ i40e_clear_hw(hw); - if (!i40e_check_recovery_mode(pf)) { - err = i40e_pf_reset(hw); - if (err) { - dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err); - goto err_pf_reset; - } - pf->pfr_count++; + + err = i40e_set_mac_type(hw); + if (err) { + dev_warn(&pdev->dev, "unidentified MAC or BLANK NVM: %d\n", + err); + goto err_pf_reset; } + + err = i40e_pf_loop_reset(pf); + if (err) { + dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err); + goto err_pf_reset; + } + + i40e_check_recovery_mode(pf); + hw->aq.num_arq_entries = I40E_AQ_LEN; hw->aq.num_asq_entries = I40E_AQ_LEN; hw->aq.arq_buf_size = I40E_MAX_AQ_BUF_SIZE;