Patchwork [U-Boot,04/10] ARM: remove broken "evb4510" board.

login
register
mail settings
Submitter Wolfgang Denk
Date Sept. 5, 2011, 12:37 p.m.
Message ID <1315226254-16826-5-git-send-email-wd@denx.de>
Download mbox | patch
Permalink /patch/113352/
State Accepted
Commit 26e670ea434838d1939dc3adf7b7cc79189b2171
Headers show

Comments

Wolfgang Denk - Sept. 5, 2011, 12:37 p.m.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Curt Brune <curt@cucy.com>
---
 CREDITS                       |    1 -
 MAKEALL                       |    1 -
 board/evb4510/Makefile        |   51 ----
 board/evb4510/config.mk       |   27 --
 board/evb4510/evb4510.c       |   64 -----
 board/evb4510/flash.c         |  539 -----------------------------------------
 board/evb4510/lowlevel_init.S |  157 ------------
 boards.cfg                    |    1 -
 common/image.c                |   11 -
 doc/README.scrapyard          |    1 +
 include/configs/evb4510.h     |  180 --------------
 11 files changed, 1 insertions(+), 1032 deletions(-)
 delete mode 100644 board/evb4510/Makefile
 delete mode 100644 board/evb4510/config.mk
 delete mode 100644 board/evb4510/evb4510.c
 delete mode 100644 board/evb4510/flash.c
 delete mode 100644 board/evb4510/lowlevel_init.S
 delete mode 100644 include/configs/evb4510.h
Wolfgang Denk - Sept. 7, 2011, 7:50 p.m.
Dear Wolfgang Denk,

In message <1315226254-16826-5-git-send-email-wd@denx.de> you wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
> Cc: Curt Brune <curt@cucy.com>
> ---
>  CREDITS                       |    1 -
>  MAKEALL                       |    1 -
>  board/evb4510/Makefile        |   51 ----
>  board/evb4510/config.mk       |   27 --
>  board/evb4510/evb4510.c       |   64 -----
>  board/evb4510/flash.c         |  539 -----------------------------------------
>  board/evb4510/lowlevel_init.S |  157 ------------
>  boards.cfg                    |    1 -
>  common/image.c                |   11 -
>  doc/README.scrapyard          |    1 +
>  include/configs/evb4510.h     |  180 --------------
>  11 files changed, 1 insertions(+), 1032 deletions(-)
>  delete mode 100644 board/evb4510/Makefile
>  delete mode 100644 board/evb4510/config.mk
>  delete mode 100644 board/evb4510/evb4510.c
>  delete mode 100644 board/evb4510/flash.c
>  delete mode 100644 board/evb4510/lowlevel_init.S
>  delete mode 100644 include/configs/evb4510.h

Applied, thanks.

Best regards,

Wolfgang Denk

Patch

diff --git a/CREDITS b/CREDITS
index 34075a0..487a55e 100644
--- a/CREDITS
+++ b/CREDITS
@@ -82,7 +82,6 @@  D: Port to the gw8260 board
 N: Curt Brune
 E: curt@cucy.com
 D: Added support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
-D: Added support for ESPD-Inc. EVB4510 Board
 W: http://www.cucy.com
 
 N: Jonathan De Bruyne
diff --git a/MAKEALL b/MAKEALL
index 40a1ecb..2876a26 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -301,7 +301,6 @@  LIST_SA="$(boards_by_cpu sa1100)"
 #########################################################################
 
 LIST_ARM7="		\
-	evb4510		\
 	impa7		\
 	lpc2292sodimm	\
 	modnet50	\
diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile
deleted file mode 100644
index 102eade..0000000
--- a/board/evb4510/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@ 
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= evb4510.o flash.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/evb4510/config.mk b/board/evb4510/config.mk
deleted file mode 100644
index 140c989..0000000
--- a/board/evb4510/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@ 
-#
-# Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
-# Curt Brune <curt@cucy.com>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0x007d0000
diff --git a/board/evb4510/evb4510.c b/board/evb4510/evb4510.c
deleted file mode 100644
index 13abbb7..0000000
--- a/board/evb4510/evb4510.c
+++ /dev/null
@@ -1,64 +0,0 @@ 
-/*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_EVB4510
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	icache_enable();
-
-	/* address for the kernel command line */
-	gd->bd->bi_boot_params = 0x800;
-
-	/* enable board LEDs for output */
-	PUT_REG( REG_IOPDATA, 0x0);
-	PUT_REG( REG_IOPMODE, 0xFFFF);
-	PUT_REG( REG_IOPDATA, 0xFF);
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
-#if CONFIG_NR_DRAM_BANKS == 2
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size  = PHYS_SDRAM_2_SIZE;
-#endif
-	return 0;
-}
-
-#endif
diff --git a/board/evb4510/flash.c b/board/evb4510/flash.c
deleted file mode 100644
index c9c6e02..0000000
--- a/board/evb4510/flash.c
+++ /dev/null
@@ -1,539 +0,0 @@ 
-/*
- *
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-#include <flash.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-typedef enum {
-	FLASH_DEV_U9_512KB = 0,
-	FLASH_DEV_U7_2MB = 1
-} FLASH_DEV;
-
-#define FLASH_DQ7		(0x80)
-#define FLASH_DQ5		(0x20)
-
-#define PROG_ADDR		(0xAAA)
-#define SETUP_ADDR		(0xAAA)
-#define ID_ADDR			(0xAAA)
-#define UNLOCK_ADDR1		(0xAAA)
-#define UNLOCK_ADDR2		(0x555)
-
-#define UNLOCK_CMD1		(0xAA)
-#define UNLOCK_CMD2		(0x55)
-#define ERASE_SUSPEND_CMD	(0xB0)
-#define ERASE_RESUME_CMD	(0x30)
-#define RESET_CMD		(0xF0)
-#define ID_CMD			(0x90)
-#define SELECT_CMD		(0x90)
-#define CHIPERASE_CMD		(0x10)
-#define BYPASS_CMD		(0x20)
-#define SECERASE_CMD		(0x30)
-#define PROG_CMD		(0xa0)
-#define SETUP_CMD		(0x80)
-
-#if 0
-#define WRITE_UNLOCK(addr) { \
-	PUT__U8( addr + UNLOCK_ADDR1, UNLOCK_CMD1); \
-	PUT__U8( addr + UNLOCK_ADDR2, UNLOCK_CMD2); \
-}
-
-/* auto select command */
-#define CMD_ID(addr) WRITE_UNLOCK(addr); { \
-	PUT__U8( addr + ID_ADDR, ID_CMD); \
-}
-
-#define CMD_RESET(addr) WRITE_UNLOCK(addr); { \
-	PUT__U8( addr + ID_ADDR, RESET_CMD); \
-}
-
-#define CMD_ERASE_SEC(base, addr) WRITE_UNLOCK(base); \
-	PUT__U8( base + SETUP_ADDR, SETUP_CMD); \
-	WRITE_UNLOCK(base); \
-	PUT__U8( addr, SECERASE_CMD);
-
-#define CMD_ERASE_CHIP(base) WRITE_UNLOCK(base); \
-	PUT__U8( base + SETUP_ADDR, SETUP_CMD); \
-	WRITE_UNLOCK(base); \
-	PUT__U8( base + SETUP_ADDR, CHIPERASE_CMD);
-
-/* prepare for bypass programming */
-#define CMD_UNLOCK_BYPASS(addr) WRITE_UNLOCK(addr); { \
-	PUT__U8( addr + ID_ADDR, 0x20); \
-}
-
-/* terminate bypass programming */
-#define CMD_BYPASS_RESET(addr) { \
-	PUT__U8(addr, 0x90); \
-	PUT__U8(addr, 0x00); \
-}
-#endif
-
-inline static void FLASH_CMD_UNLOCK (FLASH_DEV dev, u32 base)
-{
-	switch (dev) {
-	case FLASH_DEV_U7_2MB:
-		PUT__U8 (base + 0xAAA, 0xAA);
-		PUT__U8 (base + 0x555, 0x55);
-		break;
-	case FLASH_DEV_U9_512KB:
-		PUT__U8 (base + 0x555, 0xAA);
-		PUT__U8 (base + 0x2AA, 0x55);
-		break;
-	}
-}
-
-inline static void FLASH_CMD_SELECT (FLASH_DEV dev, u32 base)
-{
-	switch (dev) {
-	case FLASH_DEV_U7_2MB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0xAAA, SELECT_CMD);
-		break;
-	case FLASH_DEV_U9_512KB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0x555, SELECT_CMD);
-		break;
-	}
-}
-
-inline static void FLASH_CMD_RESET (FLASH_DEV dev, u32 base)
-{
-	switch (dev) {
-	case FLASH_DEV_U7_2MB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0xAAA, RESET_CMD);
-		break;
-	case FLASH_DEV_U9_512KB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0x555, RESET_CMD);
-		break;
-	}
-}
-
-inline static void FLASH_CMD_ERASE_SEC (FLASH_DEV dev, u32 base, u32 addr)
-{
-	switch (dev) {
-	case FLASH_DEV_U7_2MB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0xAAA, SETUP_CMD);
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (addr, SECERASE_CMD);
-		break;
-	case FLASH_DEV_U9_512KB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0x555, SETUP_CMD);
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (addr, SECERASE_CMD);
-		break;
-	}
-}
-
-inline static void FLASH_CMD_ERASE_CHIP (FLASH_DEV dev, u32 base)
-{
-	switch (dev) {
-	case FLASH_DEV_U7_2MB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0xAAA, SETUP_CMD);
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base, CHIPERASE_CMD);
-		break;
-	case FLASH_DEV_U9_512KB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0x555, SETUP_CMD);
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base, CHIPERASE_CMD);
-		break;
-	}
-}
-
-inline static void FLASH_CMD_UNLOCK_BYPASS (FLASH_DEV dev, u32 base)
-{
-	switch (dev) {
-	case FLASH_DEV_U7_2MB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0xAAA, BYPASS_CMD);
-		break;
-	case FLASH_DEV_U9_512KB:
-		FLASH_CMD_UNLOCK (dev, base);
-		PUT__U8 (base + 0x555, BYPASS_CMD);
-		break;
-	}
-}
-
-inline static void FLASH_CMD_BYPASS_RESET (FLASH_DEV dev, u32 base)
-{
-	PUT__U8 (base, SELECT_CMD);
-	PUT__U8 (base, 0x0);
-}
-
-/* poll for flash command completion */
-static u16 _flash_poll (FLASH_DEV dev, u32 addr, u16 data, ulong timeOut)
-{
-	u32 done = 0;
-	ulong t0;
-
-	u16 error = 0;
-	volatile u16 flashData;
-
-	data = data & 0xFF;
-	t0 = get_timer (0);
-	while (get_timer (t0) < timeOut) {
-		/*	for( i = 0; i < POLL_LOOPS; i++) { */
-		/*  Read the Data */
-		flashData = GET__U8 (addr);
-
-		/*  FLASH_DQ7 = Data? */
-		if ((flashData & FLASH_DQ7) == (data & FLASH_DQ7)) {
-			done = 1;
-			break;
-		}
-
-		/*  Check Timeout (FLASH_DQ5==1) */
-		if (flashData & FLASH_DQ5) {
-			/*  Read the Data */
-			flashData = GET__U8 (addr);
-
-			/*  FLASH_DQ7 = Data? */
-			if (!((flashData & FLASH_DQ7) == (data & FLASH_DQ7))) {
-				printf ("_flash_poll(): FLASH_DQ7 & flashData not equal to write value\n");
-				error = ERR_PROG_ERROR;
-			}
-			FLASH_CMD_RESET (dev, addr);
-			done = 1;
-			break;
-		}
-		/*  spin delay */
-		udelay (10);
-	}
-
-
-	/*  error update */
-	if (!done) {
-		printf ("_flash_poll(): Timeout\n");
-		error = ERR_TIMOUT;
-	}
-
-	/*  Check the data */
-	if (!error) {
-		/*  Read the Data */
-		flashData = GET__U8 (addr);
-		if (flashData != data) {
-			error = ERR_PROG_ERROR;
-			printf ("_flash_poll(): flashData(0x%04x) not equal to data(0x%04x)\n",
-				flashData, data);
-		}
-	}
-
-	return error;
-}
-
-/*-----------------------------------------------------------------------
- */
-static int _flash_check_protection (flash_info_t * info, int s_first, int s_last)
-{
-	int sect, prot = 0;
-
-	for (sect = s_first; sect <= s_last; sect++)
-		if (info->protect[sect]) {
-			printf ("  Flash sector %d protected.\n", sect);
-			prot++;
-		}
-	return prot;
-}
-
-static int _detectFlash (FLASH_DEV dev, u32 base, u8 venId, u8 devId)
-{
-
-	u32 baseAddr = base | CACHE_DISABLE_MASK;
-	u8 vendorId, deviceId;
-
-	/*	printf(__FUNCTION__"(): detecting flash @ 0x%08x\n", base); */
-
-	/* Send auto select command and read manufacturer info */
-	FLASH_CMD_SELECT (dev, baseAddr);
-	vendorId = GET__U8 (baseAddr);
-	FLASH_CMD_RESET (dev, baseAddr);
-
-	/* Send auto select command and read device info */
-	FLASH_CMD_SELECT (dev, baseAddr);
-
-	if (dev == FLASH_DEV_U7_2MB) {
-		deviceId = GET__U8 (baseAddr + 2);
-	} else if (dev == FLASH_DEV_U9_512KB) {
-		deviceId = GET__U8 (baseAddr + 1);
-	} else {
-		return 0;
-	}
-
-	FLASH_CMD_RESET (dev, baseAddr);
-
-	/* printf (__FUNCTION__"(): found vendorId 0x%04x, deviceId 0x%04x\n",
-		vendorId, deviceId);
-	 */
-
-	return (vendorId == venId) && (deviceId == devId);
-
-}
-
-/******************************************************************************
- *
- * Public u-boot interface functions below
- *
- *****************************************************************************/
-
-/***************************************************************************
- *
- * Flash initialization
- *
- * This board has two banks of flash, but the base addresses depend on
- * how the board is jumpered.
- *
- * The two flash types are:
- *
- *   AMD Am29LV160DB (2MB) sectors layout 16KB, 2x8KB, 32KB, 31x64KB
- *
- *   AMD Am29LV040B  (512KB)  sectors: 8x64KB
- *****************************************************************************/
-
-unsigned long flash_init (void)
-{
-	flash_info_t *info;
-	u16 i;
-	u32 flashtest;
-	s16 amd160 = -1;
-	u32 amd160base = 0;
-
-#if CONFIG_SYS_MAX_FLASH_BANKS == 2
-	s16 amd040 = -1;
-	u32 amd040base = 0;
-#endif
-
-	/* configure PHYS_FLASH_1 */
-	if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_1, 0x1, 0x49)) {
-		amd160 = 0;
-		amd160base = PHYS_FLASH_1;
-#if CONFIG_SYS_MAX_FLASH_BANKS == 1
-	}
-#else
-		if (_detectFlash
-		    (FLASH_DEV_U9_512KB, PHYS_FLASH_2, 0x1, 0x4F)) {
-			amd040 = 1;
-			amd040base = PHYS_FLASH_2;
-		} else {
-			printf (__FUNCTION__
-				"(): Unable to detect PHYS_FLASH_2: 0x%08x\n",
-				PHYS_FLASH_2);
-		}
-	} else if (_detectFlash (FLASH_DEV_U9_512KB, PHYS_FLASH_1, 0x1, 0x4F)) {
-		amd040 = 0;
-		amd040base = PHYS_FLASH_1;
-		if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_2, 0x1, 0x49)) {
-			amd160 = 1;
-			amd160base = PHYS_FLASH_2;
-		} else {
-			printf (__FUNCTION__
-				"(): Unable to detect PHYS_FLASH_2: 0x%08x\n",
-				PHYS_FLASH_2);
-		}
-	}
-#endif
-	else {
-		printf ("flash_init(): Unable to detect PHYS_FLASH_1: 0x%08x\n",
-			PHYS_FLASH_1);
-	}
-
-	/* Configure AMD Am29LV160DB (2MB) */
-	info = &flash_info[amd160];
-	info->flash_id = FLASH_DEV_U7_2MB;
-	info->sector_count = 35;
-	info->size = 2 * 1024 * 1024;	/* 2MB */
-	/* 1*16K Boot Block
-	   2*8K Parameter Block
-	   1*32K Small Main Block */
-	info->start[0] = amd160base;
-	info->start[1] = amd160base + 0x4000;
-	info->start[2] = amd160base + 0x6000;
-	info->start[3] = amd160base + 0x8000;
-	for (i = 1; i < info->sector_count; i++)
-		info->start[3 + i] = amd160base + i * (64 * 1024);
-
-	for (i = 0; i < info->sector_count; i++) {
-		/* Write auto select command sequence and query sector protection */
-		FLASH_CMD_SELECT (info->flash_id,
-				  info->start[i] | CACHE_DISABLE_MASK);
-		flashtest =
-			GET__U8 (((info->start[i] + 4) | CACHE_DISABLE_MASK));
-		FLASH_CMD_RESET (info->flash_id,
-				 amd160base | CACHE_DISABLE_MASK);
-		info->protect[i] = (flashtest & 0x0001);
-	}
-
-	/*
-	 * protect monitor and environment sectors in 2MB flash
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-		       amd160base, amd160base + monitor_flash_len - 1, info);
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_ENV_ADDR, CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, info);
-
-#if CONFIG_SYS_MAX_FLASH_BANKS == 2
-	/* Configure AMD Am29LV040B (512KB) */
-	info = &flash_info[amd040];
-	info->flash_id = FLASH_DEV_U9_512KB;
-	info->sector_count = 8;
-	info->size = 512 * 1024;	/* 512KB, 8 x 64KB */
-	for (i = 0; i < info->sector_count; i++) {
-		info->start[i] = amd040base + i * (64 * 1024);
-		/* Write auto select command sequence and query sector protection */
-		FLASH_CMD_SELECT (info->flash_id,
-				  info->start[i] | CACHE_DISABLE_MASK);
-		flashtest =
-			GET__U8 (((info->start[i] + 2) | CACHE_DISABLE_MASK));
-		FLASH_CMD_RESET (info->flash_id,
-				 amd040base | CACHE_DISABLE_MASK);
-		info->protect[i] = (flashtest & 0x0001);
-	}
-#endif
-
-	return flash_info[0].size
-#if CONFIG_SYS_MAX_FLASH_BANKS == 2
-		+ flash_info[1].size
-#endif
-		;
-}
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_DEV_U7_2MB) {
-		printf ("AMD Am29LV160DB (2MB) 16KB,2x8KB,32KB,31x64KB\n");
-	} else if (info->flash_id == FLASH_DEV_U9_512KB) {
-		printf ("AMD Am29LV040B	 (512KB) 8x64KB\n");
-	} else {
-		printf ("Unknown flash_id ...\n");
-		return;
-	}
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 4) == 0)
-			printf ("\n   ");
-		printf (" S%02d @ 0x%08lX%s", i,
-			info->start[i], info->protect[i] ? " !" : "  ");
-	}
-	printf ("\n");
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	u16 i, error = 0;
-
-	printf ("\n");
-
-	/* check flash protection bits */
-	if (_flash_check_protection (info, s_first, s_last)) {
-		printf ("  Flash erase aborted due to protected sectors\n");
-		return ERR_PROTECTED;
-	}
-
-	if ((s_first < info->sector_count) && (s_first <= s_last)) {
-		for (i = s_first; i <= s_last && !error; i++) {
-			printf ("  Erasing Sector %d @ 0x%08lx ... ", i,
-				info->start[i]);
-			/* bypass the cache to access the flash memory */
-			FLASH_CMD_ERASE_SEC (info->flash_id,
-					     (info->
-					      start[0] | CACHE_DISABLE_MASK),
-					     (info->
-					      start[i] | CACHE_DISABLE_MASK));
-			/* look for sector to become 0xFF after erase */
-			error = _flash_poll (info->flash_id,
-					     info->
-					     start[i] | CACHE_DISABLE_MASK,
-					     0xFF, CONFIG_SYS_FLASH_ERASE_TOUT);
-			FLASH_CMD_RESET (info->flash_id,
-					 (info->
-					  start[0] | CACHE_DISABLE_MASK));
-			printf ("done\n");
-			if (error) {
-				break;
-			}
-		}
-	} else
-		error = ERR_INVAL;
-
-	return error;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	u16 error = 0, i;
-	u32 n;
-	u8 *bp, *bps;
-
-	/*  Write Setup */
-	/* bypass the cache to access the flash memory */
-	FLASH_CMD_UNLOCK_BYPASS (info->flash_id,
-				 (info->start[0] | CACHE_DISABLE_MASK));
-
-	/*  Write the Data to Flash */
-
-	bp = (u8 *) (addr | CACHE_DISABLE_MASK);
-	bps = (u8 *) src;
-
-	for (n = 0; n < cnt && !error; n++, bp++, bps++) {
-
-		if (!(n % (cnt / 15))) {
-			printf (".");
-		}
-
-		/*  write the flash command for flash memory */
-		*bp = 0xA0;
-
-		/*  Write the data */
-		*bp = *bps;
-
-		/*  Check if the write is done */
-		for (i = 0; i < 0xff; i++);
-		error = _flash_poll (info->flash_id, (u32) bp, *bps,
-				     CONFIG_SYS_FLASH_WRITE_TOUT);
-		if (error) {
-			return error;
-		}
-	}
-
-	/*  Reset the Flash Mode to read */
-	FLASH_CMD_BYPASS_RESET (info->flash_id, info->start[0]);
-
-	printf (" ");
-
-	return error;
-}
diff --git a/board/evb4510/lowlevel_init.S b/board/evb4510/lowlevel_init.S
deleted file mode 100644
index 7184d72..0000000
--- a/board/evb4510/lowlevel_init.S
+++ /dev/null
@@ -1,157 +0,0 @@ 
-/*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-#include <asm/hardware.h>
-
-/***********************************************************************
- * Configure Memory Map
- *
- * This memory map allows us to relocate from FLASH to SRAM.  After
- * power-on reset the CPU only knows about the FLASH memory at address
- * 0x00000000.	After lowlevel_init completes the memory map will be:
- *
- * Memory Addr
- * 0x00000000
- *     to	8MB SRAM (U5) -- 8MB Map
- * 0x00800000
- *
- * 0x01000000
- *     to	2MB Flash @ 0x00000000 (U7) -- 2MB Map
- * 0x01200000
- *
- * 0x02000000
- *     to	512KB Flash @ 0x02000000 (U9) -- 2MB Map
- * 0x02080000
- *
- * Load all 12 memory registers with the STMIA instruction since
- * memory access is disabled once these registers are written.	The
- * last register written re-enables memory access.  For more info see
- * the user's manual for the S3C4510B, available from Samsung's web
- * site.  Search for part number "S3C4510B".
- *
- ***********************************************************************/
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/* preserve the temp register (r12 AKA ip) and remap it. */
-	ldr r1, =SRAM_BASE+0xC
-	add r0, r12, #0x01000000
-	str r0, [r1]
-
-	/* remap the link register for when we return */
-	add lr, lr, #0x01000000
-
-	/* store a short program in the on chip SRAM, which is
-	 * unaffected when remapping memory.  Note the cache must be
-	 * disabled for the on chip SRAM to be available.
-	 */
-	ldr r1, =SRAM_BASE
-	ldr r0, =0xe8801ffe  /* stmia r0, {r1-r12} */
-	str r0, [r1]
-	add r1, r1, #4
-	ldr r0, =0xe59fc000  /* ldr r12, [pc, #0]  */
-	str r0, [r1]
-	add r1, r1, #4
-	ldr r0, =0xe1a0f00e  /* mov pc, lr	   */
-	str r0, [r1]
-
-	adr   r0, memory_map_data
-	ldmia r0, {r1-r12}
-	ldr   r0, =REG_EXTDBWTH
-
-	ldr pc, =SRAM_BASE
-
-.globl reset_cpu
-reset_cpu:
-	/*
-	 * reset the cpu by re-mapping FLASH 0 to 0x0 and jumping to
-	 * address 0x0.	 We accomplish this by storing a few
-	 * instructions into the on chip SRAM (8KB) and run from
-	 * there.  Note the cache must be disabled for the on chip
-	 * SRAM to be available.
-	 *
-	 * load r2 with REG_ROMCON0
-	 * load r3 with 0x12040060	   configure FLASH bank 0 @ 0x00000000
-	 * load r4 with REG_DRAMCON0
-	 * load r5 with 0x08000380	   configure   RAM bank 0 @ 0x01000000
-	 * load r6 with REG_REFEXTCON
-	 * load r7 with 0x9c218360
-	 * load r8 with 0x0
-	 * store str r3,[r2] @ SRAM_BASE
-	 * store str r5,[r4] @ SRAM_BASE + 0x4
-	 * store str r7,[r6] @ SRAM_BASE + 0x8
-	 * store mov pc,r8   @ SRAM_BASE + 0xC
-	 * mov pc, SRAM_BASE
-	 *
-	 */
-
-	/* disable cache */
-	ldr r0, =REG_SYSCFG
-	ldr r1, =0x83ffffa0	/* cache-disabled  */
-	str r1, [r0]
-
-	ldr r2, =REG_ROMCON0
-	ldr r3, =0x02000060	/* Bank0 2MB FLASH   @ 0x00000000 */
-	ldr r4, =REG_DRAMCON0
-	ldr r5, =0x18040380	/* DRAM0 8MB SRAM    @ 0x01000000 */
-	ldr r6, =REG_REFEXTCON
-	ldr r7, =0xce278360
-	ldr r8, =0x00000000
-	ldr r1, =SRAM_BASE
-	ldr r0, =0xe5823000	/* str	r3, [r2] */
-	str r0, [r1]
-	ldr r1, =SRAM_BASE+4
-	ldr r0, =0xe5845000	/* str	r5, [r4] */
-	str r0, [r1]
-	ldr r1, =SRAM_BASE+8
-	ldr r0, =0xe5867000	/* str	r7, [r6] */
-	str r0, [r1]
-	ldr r1, =SRAM_BASE+0xC
-	ldr r0, =0xe1a0f008	/* mov	pc, r8	 */
-	str r0, [r1]
-	ldr r1, =SRAM_BASE
-	mov pc, r1
-
-	/* never return */
-
-/************************************************************************
- * Below are twelve 32-bit values for the twelve memory registers of
- * the system manager, starting with register REG_EXTDBWTH.
- ***********************************************************************/
-memory_map_data:
-	.long 0x00f03005     /* memory widths */
-	.long 0x12040060     /* Bank0 2MB FLASH	  @ 0x01000000 */
-	.long 0x22080060     /* Bank1 512KB FLASH @ 0x02000000 */
-	.long 0x00000000
-	.long 0x00000000
-	.long 0x00000000
-	.long 0x00000000
-	.long 0x08000380     /* DRAM0 8MB SRAM	  @ 0x00000000 */
-	.long 0x00000000
-	.long 0x00000000
-	.long 0x00000000
-	.long 0x9c218360     /* enable memory */
diff --git a/boards.cfg b/boards.cfg
index 95fe50c..940909f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -46,7 +46,6 @@  impa7                        arm         arm720t
 modnet50                     arm         arm720t
 integratorap_cm720t          arm         arm720t     integrator          armltd         -           integratorap
 lpc2292sodimm                arm         arm720t     -                   -              lpc2292
-evb4510                      arm         arm720t     -                   -              s3c4510b
 integratorap_cm920t          arm         arm920t     integrator          armltd         -           integratorap
 integratorcp_cm920t          arm         arm920t     integrator          armltd         -           integratorcp
 a320evb                      arm         arm920t     -                   faraday        a320
diff --git a/common/image.c b/common/image.c
index 5eea2a1..d38ce4a 100644
--- a/common/image.c
+++ b/common/image.c
@@ -970,17 +970,6 @@  int boot_get_ramdisk (int argc, char * const argv[], bootm_headers_t *images,
 			rd_data = rd_len = rd_load = 0;
 			return 1;
 		}
-
-#if defined(CONFIG_B2) || defined(CONFIG_EVB4510) || defined(CONFIG_ARMADILLO)
-		/*
-		 * We need to copy the ramdisk to SRAM to let Linux boot
-		 */
-		if (rd_data) {
-			memmove ((void *)rd_load, (uchar *)rd_data, rd_len);
-			rd_data = rd_load;
-		}
-#endif /* CONFIG_B2 || CONFIG_EVB4510 || CONFIG_ARMADILLO */
-
 	} else if (images->legacy_hdr_valid &&
 			image_check_type (&images->legacy_hdr_os_copy, IH_TYPE_MULTI)) {
 		/*
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index f010ded..f0da31c 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@  easily if here is something they might want to dig for...
 
 Board	Arch	CPU	removed	    Commit	last known maintainer/contact
 =============================================================================
+evb4510	arm	arm720t	-	  2011-09-05	Curt Brune <curt@cucy.com>
 ep7312	arm	arm720t	-	  2011-09-05	Marius Gröger <mag@sysgo.de>
 dnp1110	arm	sa1100	-	  2011-09-05	Alex Züpke <azu@sysgo.de>
 SMN42	arm	arm720t	-	  2011-09-05
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
deleted file mode 100644
index 23a2efa..0000000
--- a/include/configs/evb4510.h
+++ /dev/null
@@ -1,180 +0,0 @@ 
-/*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * Configuation settings for evb4510 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start u-boot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- *
- * Also swap the flash1 and flash2 addresses during debug.
- *
- * #define CONFIG_SKIP_LOWLEVEL_INIT
- */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7		1	/* This is a ARM7 CPU	 */
-#define CONFIG_ARM_THUMB	1	/* this is an ARM7TDMI	 */
-#define CONFIG_S3C4510B		1	/* it's a S3C4510B chip	 */
-#define CONFIG_EVB4510		1	/* on an EVB4510 Board	 */
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ    (4*1024)
-#define CONFIG_STACKSIZE_FIQ    (4*1024)
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_S3C4510_ETH   1
-#define CONFIG_DRIVER_S3C4510_I2C   1
-#define CONFIG_DRIVER_S3C4510_UART  1
-#define CONFIG_DRIVER_S3C4510_FLASH 1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1		1	/* we use Serial line 1, could also use 2 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		19200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_ETHADDR		00:40:95:36:35:33
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		10.0.0.11
-#define CONFIG_SERVERIP		10.0.0.1
-#define CONFIG_CMDLINE_TAG	/* submit bootargs to kernel */
-
-#define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTCOMMAND	"tftp 100000 uImage"
-/* #define CONFIG_BOOTARGS	"console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	19200		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory */
-#define CONFIG_SYS_PROMPT		"evb4510 # "	/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-#define CONFIG_CMDLINE_TAG                      /* allow passing of command line args to linux */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00780000	/* 4 ... 8 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x00000000	/* default load address */
-
-#define CONFIG_SYS_SYS_CLK_FREQ	50000000	/* CPU freq: 50 MHz */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 KHz */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
-*/
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map after relocation
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1		0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x00800000 /* 8 MB */
-
-#define PHYS_FLASH_1		0x01000000 /* Flash Bank #1 */
-#define PHYS_FLASH_1_SIZE	0x00200000 /* 2 MB (one chip, 8bit access) */
-
-#define PHYS_FLASH_2		0x02000000 /* Flash Bank #2 */
-#define PHYS_FLASH_2_SIZE	0x00080000 /* 512KB (one chip, 8bit access) */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_SIZE		PHYS_FLASH_1_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
-#define CONFIG_SYS_MAIN_SECT_SIZE	0x00010000  /* main size of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(4*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* environment settings */
-#define CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_NOWHERE
-
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x20000) /* environment start address */
-#define CONFIG_ENV_SECT_SIZE	0x10000	   /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE		0x1000	   /* max size for environment */
-
-#endif	/* __CONFIG_H */