Patchwork [U-Boot,08/10] ARM: remove broken "lpc2292sodimm" board.

login
register
mail settings
Submitter Wolfgang Denk
Date Sept. 5, 2011, 12:37 p.m.
Message ID <1315226254-16826-9-git-send-email-wd@denx.de>
Download mbox | patch
Permalink /patch/113351/
State Accepted
Commit d1a067a34aadba527bb81771c4159f4eb957fa59
Headers show

Comments

Wolfgang Denk - Sept. 5, 2011, 12:37 p.m.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
---
 MAKEALL                             |    1 -
 board/lpc2292sodimm/Makefile        |   51 -------
 board/lpc2292sodimm/config.mk       |   30 ----
 board/lpc2292sodimm/flash.c         |  252 -----------------------------------
 board/lpc2292sodimm/lowlevel_init.S |   87 ------------
 board/lpc2292sodimm/lpc2292sodimm.c |   57 --------
 boards.cfg                          |    1 -
 doc/README.scrapyard                |    1 +
 include/configs/lpc2292sodimm.h     |  159 ----------------------
 9 files changed, 1 insertions(+), 638 deletions(-)
 delete mode 100644 board/lpc2292sodimm/Makefile
 delete mode 100644 board/lpc2292sodimm/config.mk
 delete mode 100644 board/lpc2292sodimm/flash.c
 delete mode 100644 board/lpc2292sodimm/lowlevel_init.S
 delete mode 100644 board/lpc2292sodimm/lpc2292sodimm.c
 delete mode 100644 include/configs/lpc2292sodimm.h
Wolfgang Denk - Sept. 7, 2011, 7:50 p.m.
Dear Wolfgang Denk,

In message <1315226254-16826-9-git-send-email-wd@denx.de> you wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
> ---
>  MAKEALL                             |    1 -
>  board/lpc2292sodimm/Makefile        |   51 -------
>  board/lpc2292sodimm/config.mk       |   30 ----
>  board/lpc2292sodimm/flash.c         |  252 -----------------------------------
>  board/lpc2292sodimm/lowlevel_init.S |   87 ------------
>  board/lpc2292sodimm/lpc2292sodimm.c |   57 --------
>  boards.cfg                          |    1 -
>  doc/README.scrapyard                |    1 +
>  include/configs/lpc2292sodimm.h     |  159 ----------------------
>  9 files changed, 1 insertions(+), 638 deletions(-)
>  delete mode 100644 board/lpc2292sodimm/Makefile
>  delete mode 100644 board/lpc2292sodimm/config.mk
>  delete mode 100644 board/lpc2292sodimm/flash.c
>  delete mode 100644 board/lpc2292sodimm/lowlevel_init.S
>  delete mode 100644 board/lpc2292sodimm/lpc2292sodimm.c
>  delete mode 100644 include/configs/lpc2292sodimm.h

Applied, thanks.

Best regards,

Wolfgang Denk

Patch

diff --git a/MAKEALL b/MAKEALL
index 350a524..c6e6d04 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -301,7 +301,6 @@  LIST_SA="$(boards_by_cpu sa1100)"
 #########################################################################
 
 LIST_ARM7="		\
-	lpc2292sodimm	\
 	modnet50	\
 "
 
diff --git a/board/lpc2292sodimm/Makefile b/board/lpc2292sodimm/Makefile
deleted file mode 100644
index c1a5b0b..0000000
--- a/board/lpc2292sodimm/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@ 
-#
-# (C) Copyright 2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= flash.o lpc2292sodimm.o
-SOBJTS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJTS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJTS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lpc2292sodimm/config.mk b/board/lpc2292sodimm/config.mk
deleted file mode 100644
index 4891792..0000000
--- a/board/lpc2292sodimm/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@ 
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#address where u-boot will be relocated
-#CONFIG_SYS_TEXT_BASE = 0x0
-CONFIG_SYS_TEXT_BASE = 0x81500000
diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c
deleted file mode 100644
index fd5389f..0000000
--- a/board/lpc2292sodimm/flash.c
+++ /dev/null
@@ -1,252 +0,0 @@ 
-/*
- * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
- *
- * Modified to use the routines in arch/arm/cpu/arm720t/lpc2292/flash.c by
- * Gary Jennejohn <garyj@denx,de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-#define SST_BASEADDR 0x80000000
-#define SST_ADDR1 ((volatile ushort*)(SST_BASEADDR + (0x5555 << 1)))
-#define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1)))
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);
-extern int lpc2292_flash_erase(flash_info_t *, int, int);
-extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong);
-
-/*-----------------------------------------------------------------------
- *
- */
-void write_word_sst(ulong addr, ushort data)
-{
-	ushort tmp;
-
-	*SST_ADDR1 = 0x00AA;
-	*SST_ADDR2 = 0x0055;
-	*SST_ADDR1 = 0x00A0;
-	*((volatile ushort*)addr) = data;
-	/* do data polling */
-	do {
-		tmp = *((volatile ushort*)addr);
-	} while (tmp != data);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
-	int j, k;
-	ulong size = 0;
-	ulong flashbase = 0;
-
-	flash_info[0].flash_id = (PHILIPS_LPC2292 & FLASH_VENDMASK);
-	flash_info[0].size = 0x003E000;	/* 256 - 8 KB */
-	flash_info[0].sector_count = 17;
-	memset (flash_info[0].protect, 0, 17);
-	flashbase = 0x00000000;
-	for (j = 0, k = 0; j < 8; j++, k++) {
-		flash_info[0].start[k] = flashbase;
-		flashbase += 0x00002000;
-	}
-	for (j = 0; j < 2; j++, k++) {
-		flash_info[0].start[k] = flashbase;
-		flashbase += 0x00010000;
-	}
-	for (j = 0; j < 7; j++, k++) {
-		flash_info[0].start[k] = flashbase;
-		flashbase += 0x00002000;
-	}
-	size += flash_info[0].size;
-
-	flash_info[1].flash_id = (SST_MANUFACT & FLASH_VENDMASK);
-	flash_info[1].size = 0x00200000; /* 2 MB */
-	flash_info[1].sector_count = 512;
-	memset (flash_info[1].protect, 0, 512);
-	flashbase = SST_BASEADDR;
-	for (j=0; j<512; j++) {
-		flash_info[1].start[j] = flashbase;
-		flashbase += 0x1000;	/* 4 KB sectors */
-	}
-	size += flash_info[1].size;
-
-	/* Protect monitor and environment sectors */
-	flash_protect (FLAG_PROTECT_SET,
-		 0x0,
-		 0x0 + monitor_flash_len - 1,
-		 &flash_info[0]);
-
-	flash_protect (FLAG_PROTECT_SET,
-		 CONFIG_ENV_ADDR,
-		 CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-		 &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-	int erased = 0;
-	unsigned long j;
-	unsigned long count;
-	unsigned char *p;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (SST_MANUFACT & FLASH_VENDMASK):
-		printf("SST: ");
-		break;
-	case (PHILIPS_LPC2292 & FLASH_VENDMASK):
-		printf("Philips: ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-	  info->size >> 10, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		if (i < (info->sector_count - 1)) {
-			count = info->start[i+1] - info->start[i];
-		}
-		else {
-			count = info->start[0] + info->size - info->start[i];
-		}
-		p = (unsigned char*)(info->start[i]);
-		erased = 1;
-		for (j = 0; j < count; j++) {
-			if (*p != 0xFF) {
-				erased = 0;
-				break;
-			}
-			p++;
-		}
-		printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : "   ",
-			erased ? " E" : "  ");
-	}
-	printf ("\n");
-}
-
-int flash_erase_sst (flash_info_t * info, int s_first, int s_last)
-{
-	int i;
-
-	for (i = s_first; i <= s_last; i++) {
-		*SST_ADDR1 = 0x00AA;
-		*SST_ADDR2 = 0x0055;
-		*SST_ADDR1 = 0x0080;
-		*SST_ADDR1 = 0x00AA;
-		*SST_ADDR2 = 0x0055;
-		*((volatile ushort*)(info->start[i])) = 0x0030;
-		/* wait for erase to finish */
-		udelay(25000);
-	}
-
-	return ERR_OK;
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	switch (info->flash_id & FLASH_VENDMASK) {
-		case (SST_MANUFACT & FLASH_VENDMASK):
-			return flash_erase_sst(info, s_first, s_last);
-		case (PHILIPS_LPC2292 & FLASH_VENDMASK):
-			return lpc2292_flash_erase(info, s_first, s_last);
-		default:
-			return ERR_PROTECTED;
-	}
-	return ERR_PROTECTED;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- *
- * cnt is in bytes
- */
-
-int write_buff_sst (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ushort tmp;
-	ulong i;
-	uchar* src_org;
-	uchar* dst_org;
-	ulong cnt_org = cnt;
-	int ret = ERR_OK;
-
-	src_org = src;
-	dst_org = (uchar*)addr;
-
-	if (addr & 1) {		/* if odd address */
-		tmp = *((uchar*)(addr - 1)); /* little endian */
-		tmp |= (*src << 8);
-		write_word_sst(addr - 1, tmp);
-		addr += 1;
-		cnt -= 1;
-		src++;
-	}
-	while (cnt > 1) {
-		tmp = ((*(src+1)) << 8) + (*src); /* little endian */
-		write_word_sst(addr, tmp);
-		addr += 2;
-		src += 2;
-		cnt -= 2;
-	}
-	if (cnt > 0) {
-		tmp = (*((uchar*)(addr + 1))) << 8;
-		tmp |= *src;
-		write_word_sst(addr, tmp);
-	}
-
-	for (i = 0; i < cnt_org; i++) {
-		if (*dst_org != *src_org) {
-			printf("Write failed. Byte %lX differs\n", i);
-			ret = ERR_PROG_ERROR;
-			break;
-		}
-		dst_org++;
-		src_org++;
-	}
-
-	return ret;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	switch (info->flash_id & FLASH_VENDMASK) {
-		case (SST_MANUFACT & FLASH_VENDMASK):
-			return write_buff_sst(info, src, addr, cnt);
-		case (PHILIPS_LPC2292 & FLASH_VENDMASK):
-			return lpc2292_write_buff(info, src, addr, cnt);
-		default:
-			return ERR_PROG_ERROR;
-	}
-	return ERR_PROG_ERROR;
-}
diff --git a/board/lpc2292sodimm/lowlevel_init.S b/board/lpc2292sodimm/lowlevel_init.S
deleted file mode 100644
index f579a1a..0000000
--- a/board/lpc2292sodimm/lowlevel_init.S
+++ /dev/null
@@ -1,87 +0,0 @@ 
-/*
- * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/hardware.h>
-
-/* some parameters for the board */
-/* setting up the memory */
-#define	SRAM_START	0x40000000
-#define	SRAM_SIZE	0x00004000
-#define BCFG0_VALUE	0x1000ffef
-#define BCFG1_VALUE	0x10001C61
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-MEMMAP_ADR:
-	.word	MEMMAP
-BCFG0_ADR:
-	.word	BCFG0
-_BCFG0_VALUE:
-	.word	BCFG0_VALUE
-BCFG1_ADR:
-	.word	BCFG1
-_BCFG1_VALUE:
-	.word	BCFG1_VALUE
-PINSEL2_ADR:
-	.word	PINSEL2
-PINSEL2_MASK:
-	.word	0x00000000
-PINSEL2_VALUE:
-	.word	0x0F800914
-
-.extern _start
-
-.globl lowlevel_init
-lowlevel_init:
-	/* set up memory control register for bank 0 */
-	ldr r0, _BCFG0_VALUE
-	ldr r1, BCFG0_ADR
-	str r0, [r1]
-
-	/* set up memory control register for bank 1 */
-	ldr	r0, _BCFG1_VALUE
-	ldr	r1, BCFG1_ADR
-	str	r0, [r1]
-
-	/* set up PINSEL2 for bus-pins */
-	ldr	r0, PINSEL2_ADR
-	ldr	r1, [r0]
-	ldr	r2, PINSEL2_MASK
-	ldr	r3, PINSEL2_VALUE
-	and	r1, r1, r2
-	orr	r1, r1, r3
-	str	r1, [r0]
-
-	/* move vectors to beginning of SRAM */
-	mov	r2, #SRAM_START
-	mov	r0, #0 /*_start*/
-	ldmneia r0!, {r3-r10}
-	stmneia r2!, {r3-r10}
-	ldmneia r0, {r3-r9}
-	stmneia r2, {r3-r9}
-
-	/* Set-up MEMMAP register, so vectors are taken from SRAM */
-	ldr	r0, MEMMAP_ADR
-	mov	r1, #0x02	/* vectors re-mapped to static RAM */
-	str	r1, [r0]
-
-	/* everything is fine now */
-	mov	pc, lr
diff --git a/board/lpc2292sodimm/lpc2292sodimm.c b/board/lpc2292sodimm/lpc2292sodimm.c
deleted file mode 100644
index 9c2d1af..0000000
--- a/board/lpc2292sodimm/lpc2292sodimm.c
+++ /dev/null
@@ -1,57 +0,0 @@ 
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* Activate LED flasher */
-	IO_LEDFLSH = 0x40;
-
-	/* arch number MACH_TYPE_ARMADILLO - not official*/
-	gd->bd->bi_arch_number = 83;
-
-	/* location of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return (0);
-}
diff --git a/boards.cfg b/boards.cfg
index da280e2..7405e90 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -44,7 +44,6 @@  omap2420h4                   arm         arm1136     -                   ti
 tnetv107x_evm                arm         arm1176     tnetv107xevm        ti             tnetv107x
 modnet50                     arm         arm720t
 integratorap_cm720t          arm         arm720t     integrator          armltd         -           integratorap
-lpc2292sodimm                arm         arm720t     -                   -              lpc2292
 integratorap_cm920t          arm         arm920t     integrator          armltd         -           integratorap
 integratorcp_cm920t          arm         arm920t     integrator          armltd         -           integratorcp
 a320evb                      arm         arm920t     -                   faraday        a320
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index bfe664e..44b43ad 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@  easily if here is something they might want to dig for...
 
 Board	Arch	CPU	removed	    Commit	last known maintainer/contact
 =============================================================================
+lpc2292sodimm arm arm720t -	  2011-09-05
 lart	arm	sa1100	-	  2011-09-05	Alex Züpke <azu@sysgo.de>
 impa7	arm	arm720t	-	  2011-09-05	Marius Gröger <mag@sysgo.de>
 gcplus	arm	sa1100	-	  2011-09-05	George G. Davis <gdavis@mvista.com>
diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
deleted file mode 100644
index 17972d7..0000000
--- a/include/configs/lpc2292sodimm.h
+++ /dev/null
@@ -1,159 +0,0 @@ 
-/*
- * (C) Copyright 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Configuation settings for the LPC2292SODIMM board from Embedded Artists.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start u-boot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7		1	/* This is a ARM7 CPU	*/
-#define CONFIG_ARM_THUMB	1	/* this is an ARM720TDMI */
-#define CONFIG_LPC2292
-#undef	CONFIG_ARM7_REVD		/* disable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ			/* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LPC2292_SERIAL
-#define CONFIG_SERIAL1		1	/* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_BOOTDELAY	5
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"LPC2292SODIMM # " /* Monitor Command Prompt	*/
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x40000000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x40000000	/* 4 ... 8 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x00040000	/* default load address	for	*/
-						/* armadillo: kernel img is here*/
-
-#define CONFIG_SYS_SYS_CLK_FREQ	58982400	/* Hz */
-#define	CONFIG_SYS_HZ			2048		/* decrementer freq in Hz */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x81000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x00800000 /* 8 MB SDRAM */
-
-#define PHYS_FLASH_1		0x80000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE		0x00200000 /* 2 MB */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* max number of sectors on one chip	*/
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(0x0 + 0x3C000)	/* Addr of Environment Sector	*/
-#define CONFIG_ENV_SIZE		0x2000 /* Total Size of Environment Sector	*/
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_MMC 1
-/* we use this ethernet chip */
-#define CONFIG_ENC28J60_LPC2292
-
-#endif	/* __CONFIG_H */