diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 20dbc2f..e7e21c7 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -275,6 +275,7 @@ dtb-$(CONFIG_AM33XX) += \
 	am335x-brppt1-nand.dtb \
 	am335x-brppt1-spi.dtb \
 	am335x-brxre1.dtb \
+	am335x-brsmarc1.dtb \
 	am335x-draco.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
diff --git a/arch/arm/dts/am335x-brsmarc1.dts b/arch/arm/dts/am335x-brsmarc1.dts
new file mode 100644
index 0000000..1a7f9a5
--- /dev/null
+++ b/arch/arm/dts/am335x-brsmarc1.dts
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 B&R Industrial Automation GmbH
+ * http://www.br-automation.com
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "dt-bindings/thermal/thermal.h"
+
+/ {
+	model = "BRSMARC1 SoM";
+	compatible = "ti,am33xx";
+
+	fset: factory-settings {
+		bl-version	= "                                ";
+		order-no	= "                                ";
+		cpu-order-no	= "                                ";
+		hw-revision	= "                                ";
+		serial-no	= <0>;
+		device-id	= <0x0>;
+		parent-id	= <0x0>;
+		hw-variant	= <0x0>;
+		hw-platform	= <0x7>;
+		fram-offset	= <0x100>;
+		fram-size	= <0x1F00>;
+		cache-disable	= <0x0>;
+		cpu-clock	= <0x0>;
+	};
+
+	chosen {
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		fset = &fset;
+		mmc = &mmc2;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		touch0 = &burtouch0;
+		screen0 = &lcdscreen0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcdscreen0: lcdscreen@0 {
+		/*backlight = <&tps_bl>; */
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+			rotation	= <0>;
+			pupdelay	= <0>;
+			pondelay	= <0>;
+			pwrpin		= <0x000000B1>;
+			brightdrv	= <0>;
+			brightfdim	= <100>;
+			brightdef	= <50>;
+		};
+
+		display-timings {
+			default {
+				clock-frequency	= <0>;
+				hactive		= <0>;
+				vactive		= <0>;
+				hfront-porch	= <0>;
+				hback-porch	= <0>;
+				hsync-len	= <0>;
+				vfront-porch	= <0>;
+				vback-porch	= <0>;
+				vsync-len	= <0>;
+				hsync-active	= <0>;
+				vsync-active	= <0>;
+				pupdelay	= <10>;
+				pondelay	= <10>;
+			};
+		};
+	};
+
+	board_thermal: board-thermal {
+		polling-delay-passive = <1000>; /* milliseconds */
+		polling-delay = <2500>; /* milliseconds */
+
+		thermal-sensors = <&cputemp>;
+
+		trips {
+			crit_trip: crit-trip {
+				temperature = <95000>; /* millicelsius */
+				hysteresis = <5000>; /* millicelsius */
+				type = "critical";
+			};
+		};
+		cooling-maps {
+			map0 {
+				trip = <&crit_trip>;
+				cooling-device =
+				<&resetc THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&uart0 {		/* console uart */
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&uart2 {		/* X2X - P2P */
+	status = "okay";
+};
+
+&uart3 {		/* RS485 */
+	status = "okay";
+};
+
+&uart4 {		/* RS232 */
+	status = "okay";
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	tps: tps@24 {		/* PMIC controller */
+		u-boot,dm-spl;
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+	};
+
+	cputemp: temperature-sensor@48 {	/* cpu temperature */
+		#thermal-sensor-cells = <0>;
+		compatible = "nxp,pct2075";
+		reg = <0x48>;
+	};
+
+	basetemp: temperature-sensor@49 {	/* baseboard temperature */
+		#thermal-sensor-cells = <0>;
+		compatible = "nxp,pct2075";
+		reg = <0x49>;
+	};
+	extrtc: rtc@51 {	/* realtime clock */
+		compatible = "epson,rx8571";
+		reg = <0x51>;
+	};
+
+	resetc: reset-controller@60 {
+		compatible = "bur,rststm";
+		reg = <0x60>;
+
+		cooling-min-state = <0>;
+		cooling-max-state = <1>;	/* reset gets fired */
+		#cooling-cells = <2>;		/* min followed by max */
+	};
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&spi0 {
+	u-boot,dm-spl;
+	status = "okay";
+
+	cs-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>,
+		   <&gpio0 6 GPIO_ACTIVE_HIGH>,
+		   <0>,
+		   <0>;
+
+	spi-max-frequency = <24000000>;
+
+	spi_flash: spiflash@0 {
+		u-boot,dm-spl;
+		u-boot,dm-pre-reloc;
+		compatible = "spidev", "spi-flash";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	u-boot,dm-spl;
+	status = "okay";
+	cs-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>,
+		   <&gpio0 19 GPIO_ACTIVE_HIGH>,
+		   <0>,
+		   <0>;
+
+	spi-max-frequency = <24000000>;
+};
+
+&edma {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&mac {
+	status = "okay";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+	ti,ledcr = <0x0480>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <3>;
+	phy-mode = "rmii";
+	ti,ledcr = <0x0480>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x8>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&elm {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&timer1 {		/* today unused */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer2 {		/* used for vxworks primary timer device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer3 {		/* used sysdelay and hal tsc counter*/
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer4 {		/* used for PWM beeper */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer5 {		/* used for PWM backlight */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer6 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer7 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&wdt2 {
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+
+	tsc {
+		burtouch0: burtouch@0 {
+			status = "okay";
+			compatible = "bur,DdVxSfTouchXXX";
+			bur,hwtree = "IF7";
+			bur,KX0 = <0x0>;
+			bur,KX1 = <0x0>;
+			bur,KX2 = <0x0>;
+			bur,KY0 = <0x0>;
+			bur,KY1 = <0x0>;
+			bur,KY2 = <0x0>;
+		};
+	};
+};
+
+&dcan0 {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "okay";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&aes {
+	status = "disabled";
+};
+
+&rng {
+	status = "disabled";
+};
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d29f1ca..bb27b34 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -176,6 +176,7 @@ source "arch/arm/mach-omap2/omap5/Kconfig"
 source "arch/arm/mach-omap2/am33xx/Kconfig"
 
 source "board/BuR/brxre1/Kconfig"
+source "board/BuR/brsmarc1/Kconfig"
 source "board/BuR/brppt1/Kconfig"
 source "board/siemens/draco/Kconfig"
 source "board/siemens/pxm2/Kconfig"
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index 500df1a..e5bc64c 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -121,6 +121,10 @@ config TARGET_BRXRE1
 	bool "Support BRXRE1"
 	select BOARD_LATE_INIT
 
+config TARGET_BRSMARC1
+	bool "Support BRSMARC1"
+	select BOARD_LATE_INIT
+
 config TARGET_BRPPT1
 	bool "Support BRPPT1"
 	select BOARD_LATE_INIT
diff --git a/board/BuR/brsmarc1/Kconfig b/board/BuR/brsmarc1/Kconfig
new file mode 100644
index 0000000..6d3d7a2
--- /dev/null
+++ b/board/BuR/brsmarc1/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_BRSMARC1
+
+config SYS_BOARD
+	default "brsmarc1"
+
+config SYS_VENDOR
+	default "BuR"
+
+config SYS_SOC
+	default "am33xx"
+
+config SYS_CONFIG_NAME
+	default "brsmarc1"
+
+endif
diff --git a/board/BuR/brsmarc1/MAINTAINERS b/board/BuR/brsmarc1/MAINTAINERS
new file mode 100644
index 0000000..c6dfc20
--- /dev/null
+++ b/board/BuR/brsmarc1/MAINTAINERS
@@ -0,0 +1,6 @@
+BRSMARC1 BOARD
+M:	Hannes Schmelzer <hannes.schmelzer@br-automation.com>
+S:	Maintained
+F:	board/BuR/brsmarc1/
+F:	include/configs/brsmarc1.h
+F:	configs/brsmarc1_defconfig
diff --git a/board/BuR/brsmarc1/Makefile b/board/BuR/brsmarc1/Makefile
new file mode 100644
index 0000000..1c3f64d
--- /dev/null
+++ b/board/BuR/brsmarc1/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Copyright (C) 2019 Hannes Schmelzer <oe5hpm@oevsv.at> -
+# B&R Industrial Automation GmbH - http://www.br-automation.com/
+#
+
+obj-$(CONFIG_SPL_BUILD) += mux.o
+obj-y	+= ../common/br_resetc.o
+obj-y	+= ../common/common.o
+obj-y	+= board.o
diff --git a/board/BuR/brsmarc1/board.c b/board/BuR/brsmarc1/board.c
new file mode 100644
index 0000000..4c70346
--- /dev/null
+++ b/board/BuR/brsmarc1/board.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * board.c
+ *
+ * Board functions for B&R BRSMARC1 Board
+ *
+ * Copyright (C) 2017 Hannes Schmelzer <oe5hpm@oevsv.at>
+ * B&R Industrial Automation GmbH - http://www.br-automation.com
+ *
+ */
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/emif.h>
+#include <power/tps65217.h>
+#include "../common/bur_common.h"
+#include "../common/br_resetc.h"
+
+/* -------------------------------------------------------------------------*/
+/* -- defines for used GPIO Hardware -- */
+#define PER_RESET		(2 * 32 + 0)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_SPL_BUILD)
+static const struct ddr_data ddr3_data = {
+	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
+	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+	.cmd0csratio = MT41K256M16HA125E_RATIO,
+	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd1csratio = MT41K256M16HA125E_RATIO,
+	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd2csratio = MT41K256M16HA125E_RATIO,
+	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+	.zq_config = MT41K256M16HA125E_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
+};
+
+static const struct ctrl_ioregs ddr3_ioregs = {
+	.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+};
+
+#define OSC	(V_OSCK / 1000000)
+const struct dpll_params dpll_ddr3 = { 400, OSC - 1, 1, -1, -1, -1, -1};
+
+void am33xx_spl_board_init(void)
+{
+	struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
+	struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
+
+	int rc;
+	/*
+	 * enable additional clocks of modules which are accessed later from
+	 * VxWorks OS
+	 */
+	u32 *const clk_domains[] = { 0 };
+	u32 *const clk_modules_specific[] = {
+		&cmwkup->wkup_adctscctrl,
+		&cmper->spi1clkctrl,
+		&cmper->dcan0clkctrl,
+		&cmper->dcan1clkctrl,
+		&cmper->timer4clkctrl,
+		&cmper->timer5clkctrl,
+		&cmper->lcdclkctrl,
+		&cmper->lcdcclkstctrl,
+		0
+	};
+	do_enable_clocks(clk_domains, clk_modules_specific, 1);
+
+	/* setup I2C */
+	enable_i2c_pin_mux();
+
+	/* peripheral reset */
+	rc = gpio_request(PER_RESET, "PER_RESET");
+	if (rc != 0)
+		printf("cannot request PER_RESET GPIO!\n");
+
+	rc = gpio_direction_output(PER_RESET, 0);
+	if (rc != 0)
+		printf("cannot set PER_RESET GPIO!\n");
+
+	/* setup pmic */
+	pmicsetup(0, 0);
+}
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+	return &dpll_ddr3;
+}
+
+void sdram_init(void)
+{
+	config_ddr(400, &ddr3_ioregs,
+		   &ddr3_data,
+		   &ddr3_cmd_ctrl_data,
+		   &ddr3_emif_reg_data, 0);
+}
+#endif /* CONFIG_SPL_BUILD */
+#if !defined(CONFIG_SPL_BUILD)
+
+/* decision if backlight is switched on or not on powerup */
+int board_backlightstate(void)
+{
+	u8 bklmask, rstcause;
+	int rc = 0;
+
+	rc |= br_resetc_regget(RSTCTRL_SCRATCHREG1, &bklmask);
+	rc |= br_resetc_regget(RSTCTRL_ERSTCAUSE, &rstcause);
+
+	if (rc != 0) {
+		printf("%s: read rstctrl failed!\n", __func__);
+		return 1;
+	}
+
+	if ((rstcause & bklmask) != 0)
+		return 0;
+
+	return 1;
+}
+
+/* Basic board specific setup. run quite after relocation */
+int board_init(void)
+{
+	if (power_tps65217_init(0))
+		printf("WARN: cannot setup PMIC 0x24 @ bus #0, not found!.\n");
+
+	return 0;
+}
+
+#if defined(CONFIG_BOARD_LATE_INIT)
+
+int board_late_init(void)
+{
+	br_resetc_bmode();
+
+	return 0;
+}
+
+#endif /* CONFIG_BOARD_LATE_INIT */
+#endif /* !CONFIG_SPL_BUILD */
diff --git a/board/BuR/brsmarc1/config.mk b/board/BuR/brsmarc1/config.mk
new file mode 100644
index 0000000..0692988
--- /dev/null
+++ b/board/BuR/brsmarc1/config.mk
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Copyright (C) 2019 Hannes Schmelzer <oe5hpm@oevsv.at> -
+# B&R Industrial Automation GmbH - http://www.br-automation.com
+#
+
+hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE) | sed -e 's/am335x-//')
+
+payload_off :=$(shell printf "%d" $(CONFIG_SYS_SPI_U_BOOT_OFFS))
+
+quiet_cmd_prodbin = PRODBIN $@ $(payload_off)
+cmd_prodbin =								\
+	dd if=/dev/zero ibs=1M count=2 2>/dev/null | tr "\000" "\377" >$@ && \
+	dd conv=notrunc bs=1 if=MLO.byteswap of=$@ seek=0 2>/dev/null && \
+	dd bs=1 if=u-boot-dtb.img of=$@ seek=$(payload_off) 2>/dev/null
+
+quiet_cmd_prodzip = SAPZIP  $@
+cmd_prodzip =					\
+	test -d misc && rm -r misc;		\
+	mkdir misc &&				\
+	cp MLO.byteswap misc/ &&		\
+	cp spl/u-boot-spl.bin misc/ &&		\
+	cp u-boot-dtb.img misc/ &&		\
+	zip -9 -r $@ misc/* >/dev/null $<
+
+ALL-y += $(hw-platform-y)_prog.bin
+ALL-y += $(hw-platform-y)_prod.zip
+
+$(hw-platform-y)_prog.bin: u-boot-dtb.img spl/u-boot-spl.bin
+	$(call if_changed,prodbin)
+
+$(hw-platform-y)_prod.zip: $(hw-platform-y)_prog.bin
+	$(call if_changed,prodzip)
\ No newline at end of file
diff --git a/board/BuR/brsmarc1/mux.c b/board/BuR/brsmarc1/mux.c
new file mode 100644
index 0000000..33c214d
--- /dev/null
+++ b/board/BuR/brsmarc1/mux.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * mux.c
+ *
+ * Pinmux Setting for B&R BRSMARC1 Board (HW-Rev. 1)
+ *
+ * Copyright (C) 2017 Hannes Schmelzer <hannes.schmelzer@br-automation.com>
+ * B&R Industrial Automation GmbH - http://www.br-automation.com
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+
+static struct module_pin_mux spi0_pin_mux[] = {
+	/* SPI0_SCLK */
+	{OFFSET(spi0_sclk),	MODE(0) | PULLUDEN | RXACTIVE},
+	/* SPI0_D0 */
+	{OFFSET(spi0_d0),	MODE(0) | PULLUDEN | RXACTIVE},
+	/* SPI0_D1 */
+	{OFFSET(spi0_d1),	MODE(0) | PULLUDEN | RXACTIVE},
+	/* SPI0_CS0 */
+	{OFFSET(spi0_cs0),	MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
+	/* SPI0_CS1 */
+	{OFFSET(spi0_cs1),	MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
+	{-1},
+};
+
+static struct module_pin_mux spi1_pin_mux[] = {
+	/* SPI1_SCLK */
+	{OFFSET(mcasp0_aclkx),	MODE(3) | PULLUDEN | RXACTIVE},
+	/* SPI1_D0 */
+	{OFFSET(mcasp0_fsx),	MODE(3) | PULLUDEN | RXACTIVE},
+	/* SPI1_D1 */
+	{OFFSET(mcasp0_axr0),	MODE(3) | PULLUDEN | RXACTIVE},
+	/* SPI1_CS0 */
+	{OFFSET(mcasp0_ahclkr),	MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
+	/* SPI1_CS1 */
+	{OFFSET(xdma_event_intr0), MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
+	{-1},
+};
+
+static struct module_pin_mux dcan0_pin_mux[] = {
+	/* DCAN0 TX */
+	{OFFSET(uart1_ctsn),	MODE(2) | PULLUDEN | PULLUP_EN},
+	/* DCAN0 RX */
+	{OFFSET(uart1_rtsn),	MODE(2) | RXACTIVE},
+	{-1},
+};
+
+static struct module_pin_mux dcan1_pin_mux[] = {
+	/* DCAN1 TX */
+	{OFFSET(uart0_ctsn),	MODE(2) | PULLUDEN | PULLUP_EN},
+	/* DCAN1 RX */
+	{OFFSET(uart0_rtsn),	MODE(2) | RXACTIVE},
+	{-1},
+};
+
+static struct module_pin_mux gpios[] = {
+	/* GPIO0_7 - LVDS_EN */
+	{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
+	/* GPIO0_20 - BKLT_PWM (timer7) */
+	{OFFSET(xdma_event_intr1), (MODE(4) | PULLUDDIS | PULLDOWN_EN)},
+	/* GPIO2_4 - DISON */
+	{OFFSET(gpmc_wen), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
+	/* GPIO1_24 - RGB_EN */
+	{OFFSET(gpmc_a8), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
+	/* GPIO1_28 - nPD */
+	{OFFSET(gpmc_be1n), (MODE(7) | PULLUDEN | PULLUP_EN)},
+	/* GPIO2_5 - Watchdog */
+	{OFFSET(gpmc_be0n_cle), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
+	/* GPIO2_0 - ResetOut */
+	{OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN | PULLUP_EN)},
+	/* GPIO2_2 - BKLT_EN */
+	{OFFSET(gpmc_advn_ale), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
+	/* GPIO1_17 - GPIO0 */
+	{OFFSET(gpmc_a1), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO1_18 - GPIO1 */
+	{OFFSET(gpmc_a2), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO1_19 - GPIO2 */
+	{OFFSET(gpmc_a3), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO1_22 - GPIO3 */
+	{OFFSET(gpmc_a6), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO1_23 - GPIO4 */
+	{OFFSET(gpmc_a7), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO1_25 - GPIO5 */
+	{OFFSET(gpmc_a9), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO3_7 - GPIO6 */
+	{OFFSET(emu0), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO3_8 - GPIO7 */
+	{OFFSET(emu1), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO3_18 - GPIO8 */
+	{OFFSET(mcasp0_aclkr), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO3_19 - GPIO9 */
+	{OFFSET(mcasp0_fsr), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO3_20 - GPIO10 */
+	{OFFSET(mcasp0_axr1), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO3_21 - GPIO11 */
+	{OFFSET(mcasp0_ahclkx), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO2_28 - DRAM-strapping */
+	{OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | PULLUP_EN)},
+	/* GPIO2_4 - not routed (Pin U6) */
+	{OFFSET(gpmc_wen), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* GPIO2_5 - not routed (Pin T6) */
+	{OFFSET(gpmc_be0n_cle), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* GPIO2_28 - not routed (Pin G15) */
+	{OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* GPIO3_18 - not routed (Pin B12) */
+	{OFFSET(mcasp0_aclkr), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	{-1},
+};
+
+static struct module_pin_mux uart0_pin_mux[] = {
+	/* UART0_RXD */
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART0_TXD */
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
+	{-1},
+};
+
+static struct module_pin_mux uart234_pin_mux[] = {
+	/* UART2_RXD */
+	{OFFSET(mii1_txclk), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART2_TXD */
+	{OFFSET(mii1_rxclk), (MODE(1) | PULLUDEN)},
+
+	/* UART3_RXD */
+	{OFFSET(mii1_rxd3), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART3_TXD */
+	{OFFSET(mmc0_dat0), (MODE(3) | PULLUDEN)},
+	/* UART3_RTS */
+	{OFFSET(mmc0_cmd), (MODE(2) | PULLUDEN)},
+	/* UART3_CTS */
+	{OFFSET(mmc0_clk), (MODE(2) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+
+	/* UART4_RXD */
+	{OFFSET(mii1_txd3), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART4_TXD */
+	{OFFSET(mii1_txd2), (MODE(3) | PULLUDEN)},
+	/* UART4_RTS */
+	{OFFSET(mmc0_dat2), (MODE(3) | PULLUDEN)},
+	/* UART4_CTS */
+	{OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+
+	{-1},
+};
+
+static struct module_pin_mux i2c_pin_mux[] = {
+	/* I2C0_DATA */
+	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	/* I2C0_SCLK */
+	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	/* I2C1_DATA */
+	{OFFSET(uart1_rxd), (MODE(3) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	/* I2C1_SCLK */
+	{OFFSET(uart1_txd), (MODE(3) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	{-1},
+};
+
+static struct module_pin_mux eth_pin_mux[] = {
+	/* ETH1 */
+	{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},	/* ETH1_REFCLK */
+	{OFFSET(mii1_crs), MODE(1) | RXACTIVE},		/* RMII1_CRSDV */
+	{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},	/* RMII1_RXER */
+	{OFFSET(mii1_txen), MODE(1)},			/* RMII1_TXEN */
+	{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},	/* RMII1_RXD0 */
+	{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},	/* RMII1_RXD1 */
+	{OFFSET(mii1_txd0), MODE(1)},			/* RMII1_TXD0 */
+	{OFFSET(mii1_txd1), MODE(1)},			/* RMII1_TXD1 */
+
+	/* ETH2 */
+	{OFFSET(mii1_col), MODE(1) | RXACTIVE},		/* ETH2_REFCLK */
+	{OFFSET(gpmc_wait0), MODE(3) | RXACTIVE},	/* RMII2_CRSDV */
+	{OFFSET(gpmc_wpn), MODE(3) | RXACTIVE},		/* RMII2_RXER */
+	{OFFSET(gpmc_a0), MODE(3)},			/* RMII2_TXEN */
+	{OFFSET(gpmc_a11), MODE(3) | RXACTIVE},		/* RMII2_RXD0 */
+	{OFFSET(gpmc_a10), MODE(3) | RXACTIVE},		/* RMII2_RXD1 */
+	{OFFSET(gpmc_a5), MODE(3)},			/* RMII2_TXD0 */
+	{OFFSET(gpmc_a4), MODE(3)},			/* RMII2_TXD1 */
+
+	/* gpio2_19, gpio 3_4, not connected on board */
+	{OFFSET(mii1_rxd2), MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
+	{OFFSET(mii1_rxdv), MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
+
+	/* ETH Management */
+	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},	/* MDIO_DATA */
+	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},		/* MDIO_CLK */
+
+	{-1},
+};
+
+static struct module_pin_mux mmc1_pin_mux[] = {
+	{OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT7 */
+	{OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT6 */
+	{OFFSET(gpmc_ad5), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT5 */
+	{OFFSET(gpmc_ad4), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT4 */
+	{OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT3 */
+	{OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT2 */
+	{OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT1 */
+	{OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT0 */
+	{OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)},	/* MMC1_CLK */
+	{OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)},	/* MMC1_CMD */
+	{-1},
+};
+
+static struct module_pin_mux lcd_pin_mux[] = {
+	{OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)},	/* LCD-Data(0) */
+	{OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)},	/* LCD-Data(1) */
+	{OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)},	/* LCD-Data(2) */
+	{OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)},	/* LCD-Data(3) */
+	{OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)},	/* LCD-Data(4) */
+	{OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)},	/* LCD-Data(5) */
+	{OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)},	/* LCD-Data(6) */
+	{OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)},	/* LCD-Data(7) */
+	{OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)},	/* LCD-Data(8) */
+	{OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)},	/* LCD-Data(9) */
+	{OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)},	/* LCD-Data(10) */
+	{OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)},	/* LCD-Data(11) */
+	{OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)},	/* LCD-Data(12) */
+	{OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)},	/* LCD-Data(13) */
+	{OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)},	/* LCD-Data(14) */
+	{OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)},	/* LCD-Data(15) */
+
+	{OFFSET(gpmc_ad8), (MODE(1) | PULLUDDIS)},	/* LCD-Data(16) */
+	{OFFSET(gpmc_ad9), (MODE(1) | PULLUDDIS)},	/* LCD-Data(17) */
+	{OFFSET(gpmc_ad10), (MODE(1) | PULLUDDIS)},	/* LCD-Data(18) */
+	{OFFSET(gpmc_ad11), (MODE(1) | PULLUDDIS)},	/* LCD-Data(19) */
+	{OFFSET(gpmc_ad12), (MODE(1) | PULLUDDIS)},	/* LCD-Data(20) */
+	{OFFSET(gpmc_ad13), (MODE(1) | PULLUDDIS)},	/* LCD-Data(21) */
+	{OFFSET(gpmc_ad14), (MODE(1) | PULLUDDIS)},	/* LCD-Data(22) */
+	{OFFSET(gpmc_ad15), (MODE(1) | PULLUDDIS)},	/* LCD-Data(23) */
+
+	{OFFSET(lcd_vsync), (MODE(0) | PULLUDDIS)},	/* LCD-VSync */
+	{OFFSET(lcd_hsync), (MODE(0) | PULLUDDIS)},	/* LCD-HSync */
+	{OFFSET(lcd_ac_bias_en), (MODE(0) | PULLUDDIS)},/* LCD-DE */
+	{OFFSET(lcd_pclk), (MODE(0) | PULLUDDIS)},	/* LCD-CLK */
+
+	{-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+	configure_module_pin_mux(uart0_pin_mux);
+}
+
+void enable_i2c_pin_mux(void)
+{
+	configure_module_pin_mux(i2c_pin_mux);
+}
+
+void enable_board_pin_mux(void)
+{
+	configure_module_pin_mux(eth_pin_mux);
+	configure_module_pin_mux(spi0_pin_mux);
+	configure_module_pin_mux(spi1_pin_mux);
+	configure_module_pin_mux(dcan0_pin_mux);
+	configure_module_pin_mux(dcan1_pin_mux);
+	configure_module_pin_mux(uart234_pin_mux);
+	configure_module_pin_mux(mmc1_pin_mux);
+	configure_module_pin_mux(lcd_pin_mux);
+	configure_module_pin_mux(gpios);
+}
diff --git a/configs/brsmarc1_defconfig b/configs/brsmarc1_defconfig
new file mode 100644
index 0000000..6b21f0c
--- /dev/null
+++ b/configs/brsmarc1_defconfig
@@ -0,0 +1,107 @@
+CONFIG_ARM=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_AM33XX=y
+CONFIG_SYS_MPUCLK=600
+CONFIG_TARGET_BRSMARC1=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x0
+# CONFIG_EXPERT is not set
+# CONFIG_FIT is not set
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=0
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run b_default"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_VERSION_VARIABLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_MISC_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_SEPARATE_BSS=y
+# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_CLK=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_ITEST is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="am335x-brsmarc1"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+# CONFIG_OF_TRANSLATE is not set
+# CONFIG_SPL_BLK is not set
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHY_NATSEMI=y
+CONFIG_DM_ETH=y
+CONFIG_DRIVER_TI_CPSW=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_OMAP3_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_TI=y
+CONFIG_USB_MUSB_DSPS=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+# CONFIG_OMAP_WATCHDOG is not set
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
+# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/brsmarc1.h b/include/configs/brsmarc1.h
new file mode 100644
index 0000000..77f8755
--- /dev/null
+++ b/include/configs/brsmarc1.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * brsmarc1.h
+ *
+ * specific parts for B&R BRSMARC1 Motherboard
+ *
+ * Copyright (C) 2017 Hannes Schmelzer <oe5hpm@oevsv.at> -
+ * B&R Industrial Automation GmbH - http://www.br-automation.com
+ *
+ */
+
+#ifndef __CONFIG_BRSMARC1_H__
+#define __CONFIG_BRSMARC1_H__
+
+#include <configs/bur_cfg_common.h>
+#include <configs/bur_am335x_common.h>
+/* ------------------------------------------------------------------------- */
+#define CONFIG_BOARD_TYPES
+
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN		(5 * 1024 * 1024)
+#define CONFIG_SYS_BOOTM_LEN		(32 * 1024 * 1024)
+
+/* Clock Defines */
+#define V_OSCK				26000000  /* Clock output from T2 */
+#define V_SCLK				(V_OSCK)
+
+#define CONFIG_MACH_TYPE		3589
+
+#ifndef CONFIG_SPL_BUILD
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+BUR_COMMON_ENV \
+"autoload=0\0" \
+"scradr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+"cfgscr=mw ${dtbaddr} 0;" \
+" sf probe && sf read ${scradr} 0xC0000 0x10000 && source ${scradr};" \
+" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0" \
+"dtbaddr=0x84000000\0" \
+"loadaddr=0x82000000\0" \
+"b_break=0\0" \
+"b_tgts_std=mmc0 mmc1 def net usb0\0" \
+"b_tgts_rcy=def net usb0\0" \
+"b_tgts_pme=net usb0 mmc0 mmc1\0" \
+"b_deftgts=if test ${b_mode} = 12; then setenv b_tgts ${b_tgts_pme};" \
+" elif test ${b_mode} = 0; then setenv b_tgts ${b_tgts_rcy};" \
+" else setenv b_tgts ${b_tgts_std}; fi\0" \
+"b_mmc0=load mmc 1 ${scradr} bootscr.img && source ${scradr}\0" \
+"b_mmc1=load mmc 1 ${loadaddr} arimg.ugz && run startsys\0" \
+"b_def=sf read ${loadaddr} 100000 700000; run startsys\0" \
+"b_net=tftp ${scradr} netscript.img && source ${scradr}\0" \
+"b_usb0=usb start && load usb 0 ${scradr} bootscr.img && source ${scradr}\0" \
+"b_default=run b_deftgts; for target in ${b_tgts};"\
+" do run b_${target}; if test ${b_break} = 1; then; exit; fi; done\0" \
+"vxargs=setenv bootargs cpsw(0,0)host:vxWorks h=${serverip}" \
+" e=${ipaddr}:${netmask} g=${gatewayip} u=vxWorksFTP pw=vxWorks\0" \
+"vxfdt=fdt addr ${dtbaddr}; fdt resize 0x8000;" \
+" fdt boardsetup\0" \
+"startsys=run vxargs && mw 0x80001100 0 && run vxfdt &&" \
+" bootm ${loadaddr} - ${dtbaddr}\0"
+#endif /* !CONFIG_SPL_BUILD*/
+
+/* undefine command which we not need here */
+#undef CONFIG_BOOTM_NETBSD
+#undef CONFIG_BOOTM_PLAN9
+#undef CONFIG_BOOTM_RTEMS
+
+/* Support both device trees and ATAGs. */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+/* SPI Flash */
+#define CONFIG_SYS_SPI_U_BOOT_OFFS		0x40000
+
+/* Environment */
+#define CONFIG_ENV_SIZE				0x10000
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_SPI_MAX_HZ			CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_ENV_SECT_SIZE			CONFIG_ENV_SIZE
+#define CONFIG_ENV_OFFSET			0x20000
+#define CONFIG_ENV_OFFSET_REDUND		(CONFIG_ENV_OFFSET + \
+						 CONFIG_ENV_SECT_SIZE)
+
+#define CONFIG_CONS_INDEX			1
+#endif	/* __CONFIG_BRSMARC1_H__ */
