[2/2] tests: Run the iotests during "make check" again
diff mbox series

Message ID 20190715145438.6880-3-thuth@redhat.com
State New
Headers show
  • Enable iotests during "make check"
Related show

Commit Message

Thomas Huth July 15, 2019, 2:54 p.m. UTC
People often forget to run the iotests before submitting patches or pull
requests - this is likely due to the fact that we do not run the tests
during our mandatory "make check" tests yet. Now that we've got a proper
"auto" group of iotests that should be fine to run in every environment,
we can enable the iotests during "make check" again by running the "auto"
tests by default from the check-block.sh script.

Some cases still need to be checked first, though: iotests need bash and
GNU sed (otherwise they fail), and if gprof is enabled, it spoils the
output of some test cases causing them to fail. So if we detect that one
of the required programs is missing or that gprof is enabled, we still
have to skip the iotests to avoid failures.

And finally, since we are using check-block.sh now again, this patch also
removes the qemu-iotests-quick.sh script since we do not need that anymore
(and having two shell wrapper scripts around the block tests seems rather
confusing than helpful).

Signed-off-by: Thomas Huth <thuth@redhat.com>
[AJB: -makecheck to check-block.sh, move check-block to start and gate it]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
 tests/Makefile.include      |  8 +++----
 tests/check-block.sh        | 44 ++++++++++++++++++++++++++++---------
 tests/qemu-iotests-quick.sh |  8 -------
 3 files changed, 38 insertions(+), 22 deletions(-)
 delete mode 100755 tests/qemu-iotests-quick.sh

diff mbox series

diff --git a/tests/Makefile.include b/tests/Makefile.include
index a983dd32da..2bdc6e5d1c 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -141,7 +141,7 @@  check-unit-y += tests/test-uuid$(EXESUF)
 check-unit-y += tests/ptimer-test$(EXESUF)
 check-unit-y += tests/test-qapi-util$(EXESUF)
-check-block-$(CONFIG_POSIX) += tests/qemu-iotests-quick.sh
+check-block-$(call land,$(CONFIG_POSIX),$(CONFIG_SOFTMMU)) += tests/check-block.sh
 # All QTests for now are POSIX-only, but the dependencies are
 # really in libqtest, not in the testcases themselves.
@@ -1090,8 +1090,8 @@  clean-tcg: $(CLEAN_TCG_TARGET_RULES)
 QEMU_IOTESTS_HELPERS-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_LINUX)) = tests/qemu-iotests/socket_scm_helper$(EXESUF)
-.PHONY: check-tests/qemu-iotests-quick.sh
-check-tests/qemu-iotests-quick.sh: tests/qemu-iotests-quick.sh qemu-img$(EXESUF) qemu-io$(EXESUF) qemu-nbd$(EXESUF) $(QEMU_IOTESTS_HELPERS-y)
+.PHONY: check-tests/check-block.sh
+check-tests/check-block.sh: tests/check-block.sh qemu-img$(EXESUF) qemu-io$(EXESUF) qemu-nbd$(EXESUF) $(QEMU_IOTESTS_HELPERS-y)
 .PHONY: $(patsubst %, check-%, $(check-qapi-schema-y))
@@ -1165,7 +1165,7 @@  check-acceptance: check-venv $(TESTS_RESULTS_DIR)
 check-qapi-schema: $(patsubst %,check-%, $(check-qapi-schema-y)) check-tests/qapi-schema/doc-good.texi
 check-qtest: $(patsubst %,check-qtest-%, $(QTEST_TARGETS))
 check-block: $(patsubst %,check-%, $(check-block-y))
-check: check-qapi-schema check-unit check-softfloat check-qtest check-decodetree
+check: check-block check-qapi-schema check-unit check-softfloat check-qtest check-decodetree
 	rm -rf $(check-unit-y) tests/*.o $(QEMU_IOTESTS_HELPERS-y)
 	rm -rf $(sort $(foreach target,$(SYSEMU_TARGET_LIST), $(check-qtest-$(target)-y)) $(check-qtest-generic-y))
diff --git a/tests/check-block.sh b/tests/check-block.sh
index f3d12fd602..c8b6cec3f6 100755
--- a/tests/check-block.sh
+++ b/tests/check-block.sh
@@ -1,24 +1,48 @@ 
-FORMAT_LIST="raw qcow2 qed vmdk vpc"
+# Honor the SPEED environment variable, just like we do it for the qtests.
+if [ "$SPEED" = "slow" ]; then
+    format_list="raw qcow2"
+    group=
+elif [ "$SPEED" = "thorough" ]; then
+    format_list="raw qcow2 qed vmdk vpc"
+    group=
+    format_list=qcow2
+    group="-g auto"
 if [ "$#" -ne 0 ]; then
-    FORMAT_LIST="$@"
+    format_list="$@"
+if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then
+    echo "GPROF is enabled ==> Not running the qemu-iotests."
+    exit 0
-export QEMU_PROG="$PWD/x86_64-softmmu/qemu-system-x86_64"
-export QEMU_IMG_PROG="$PWD/qemu-img"
-export QEMU_IO_PROG="$PWD/qemu-io"
+if [ -z "$(find . -name 'qemu-system-*' -print)" ]; then
+    echo "No qemu-system binary available ==> Not running the qemu-iotests."
+    exit 0
+if ! command -v bash >/dev/null 2>&1 ; then
+    echo "bash not available ==> Not running the qemu-iotests."
+    exit 0
-if [ ! -x $QEMU_PROG ]; then
-    echo "'make check-block' requires qemu-system-x86_64"
-    exit 1
+if ! (sed --version | grep 'GNU sed') > /dev/null 2>&1 ; then
+    if ! command -v gsed >/dev/null 2>&1; then
+        echo "GNU sed not available ==> Not running the qemu-iotests."
+        exit 0
+    fi
 cd tests/qemu-iotests
-for FMT in $FORMAT_LIST ; do
-    ./check -T -nocache -$FMT || ret=1
+for fmt in $format_list ; do
+    ./check -makecheck -$fmt $group || ret=1
 exit $ret
diff --git a/tests/qemu-iotests-quick.sh b/tests/qemu-iotests-quick.sh
deleted file mode 100755
index 0e554bb972..0000000000
--- a/tests/qemu-iotests-quick.sh
+++ /dev/null
@@ -1,8 +0,0 @@ 
-cd tests/qemu-iotests
-TEST_DIR=${TEST_DIR:-/tmp/qemu-iotests-quick-$$} ./check -T -qcow2 -g quick || ret=1
-exit $ret