@@ -91,6 +91,7 @@ struct KVMState
int many_ioeventfds;
int intx_set_mask;
bool sync_mmu;
+ bool manual_dirty_log_protect;
/* The man page (and posix) say ioctl numbers are signed int, but
* they're not. Linux, glibc and *BSD all treat ioctl numbers as
* unsigned, and treating them as signed here can break things */
@@ -560,6 +561,159 @@ out:
return ret;
}
+/* Alignment requirement for KVM_CLEAR_DIRTY_LOG - 64 pages */
+#define KVM_CLEAR_LOG_SHIFT 6
+#define KVM_CLEAR_LOG_ALIGN (qemu_real_host_page_size << KVM_CLEAR_LOG_SHIFT)
+#define KVM_CLEAR_LOG_MASK (-KVM_CLEAR_LOG_ALIGN)
+
+/**
+ * kvm_physical_log_clear - Clear the kernel's dirty bitmap for range
+ *
+ * NOTE: this will be a no-op if we haven't enabled manual dirty log
+ * protection in the host kernel because in that case this operation
+ * will be done within log_sync().
+ *
+ * @kml: the kvm memory listener
+ * @section: the memory range to clear dirty bitmap
+ */
+static int kvm_physical_log_clear(KVMMemoryListener *kml,
+ MemoryRegionSection *section)
+{
+ KVMState *s = kvm_state;
+ struct kvm_clear_dirty_log d;
+ uint64_t start, end, bmap_start, start_delta, bmap_npages, size;
+ unsigned long *bmap_clear = NULL, psize = qemu_real_host_page_size;
+ KVMSlot *mem = NULL;
+ int ret, i;
+
+ if (!s->manual_dirty_log_protect) {
+ /* No need to do explicit clear */
+ return 0;
+ }
+
+ start = section->offset_within_address_space;
+ size = int128_get64(section->size);
+
+ if (!size) {
+ /* Nothing more we can do... */
+ return 0;
+ }
+
+ kvm_slots_lock(kml);
+
+ /* Find any possible slot that covers the section */
+ for (i = 0; i < s->nr_slots; i++) {
+ mem = &kml->slots[i];
+ if (mem->start_addr <= start &&
+ start + size <= mem->start_addr + mem->memory_size) {
+ break;
+ }
+ }
+
+ /*
+ * We should always find one memslot until this point, otherwise
+ * there could be something wrong from the upper layer
+ */
+ assert(mem && i != s->nr_slots);
+
+ /*
+ * We need to extend either the start or the size or both to
+ * satisfy the KVM interface requirement. Firstly, do the start
+ * page alignment on 64 host pages
+ */
+ bmap_start = (start - mem->start_addr) & KVM_CLEAR_LOG_MASK;
+ start_delta = start - mem->start_addr - bmap_start;
+ bmap_start /= psize;
+
+ /*
+ * The kernel interface has restriction on the size too, that either:
+ *
+ * (1) the size is 64 host pages aligned (just like the start), or
+ * (2) the size fills up until the end of the KVM memslot.
+ */
+ bmap_npages = DIV_ROUND_UP(size + start_delta, KVM_CLEAR_LOG_ALIGN)
+ << KVM_CLEAR_LOG_SHIFT;
+ end = mem->memory_size / psize;
+ if (bmap_npages > end - bmap_start) {
+ bmap_npages = end - bmap_start;
+ }
+ start_delta /= psize;
+
+ /*
+ * Prepare the bitmap to clear dirty bits. Here we must guarantee
+ * that we won't clear any unknown dirty bits otherwise we might
+ * accidentally clear some set bits which are not yet synced from
+ * the kernel into QEMU's bitmap, then we'll lose track of the
+ * guest modifications upon those pages (which can directly lead
+ * to guest data loss or panic after migration).
+ *
+ * Layout of the KVMSlot.dirty_bmap:
+ *
+ * |<-------- bmap_npages -----------..>|
+ * [1]
+ * start_delta size
+ * |----------------|-------------|------------------|------------|
+ * ^ ^ ^ ^
+ * | | | |
+ * start bmap_start (start) end
+ * of memslot of memslot
+ *
+ * [1] bmap_npages can be aligned to either 64 pages or the end of slot
+ */
+
+ assert(bmap_start % BITS_PER_LONG == 0);
+ /* We should never do log_clear before log_sync */
+ assert(mem->dirty_bmap);
+ if (start_delta) {
+ /* Slow path - we need to manipulate a temp bitmap */
+ bmap_clear = bitmap_new(bmap_npages);
+ bitmap_copy_with_src_offset(bmap_clear, mem->dirty_bmap,
+ bmap_start, start_delta + size / psize);
+ /*
+ * We need to fill the holes at start because that was not
+ * specified by the caller and we extended the bitmap only for
+ * 64 pages alignment
+ */
+ bitmap_clear(bmap_clear, 0, start_delta);
+ d.dirty_bitmap = bmap_clear;
+ } else {
+ /* Fast path - start address aligns well with BITS_PER_LONG */
+ d.dirty_bitmap = mem->dirty_bmap + BIT_WORD(bmap_start);
+ }
+
+ d.first_page = bmap_start;
+ /* It should never overflow. If it happens, say something */
+ assert(bmap_npages <= UINT32_MAX);
+ d.num_pages = bmap_npages;
+ d.slot = mem->slot | (kml->as_id << 16);
+
+ if (kvm_vm_ioctl(s, KVM_CLEAR_DIRTY_LOG, &d) == -1) {
+ ret = -errno;
+ error_report("%s: KVM_CLEAR_DIRTY_LOG failed, slot=%d, "
+ "start=0x%"PRIx64", size=0x%"PRIx32", errno=%d",
+ __func__, d.slot, (uint64_t)d.first_page,
+ (uint32_t)d.num_pages, ret);
+ } else {
+ ret = 0;
+ trace_kvm_clear_dirty_log(d.slot, d.first_page, d.num_pages);
+ }
+
+ /*
+ * After we have updated the remote dirty bitmap, we update the
+ * cached bitmap as well for the memslot, then if another user
+ * clears the same region we know we shouldn't clear it again on
+ * the remote otherwise it's data loss as well.
+ */
+ bitmap_clear(mem->dirty_bmap, bmap_start + start_delta,
+ size / psize);
+ /* This handles the NULL case well */
+ g_free(bmap_clear);
+
+ kvm_slots_unlock(kml);
+
+ return ret;
+}
+
static void kvm_coalesce_mmio_region(MemoryListener *listener,
MemoryRegionSection *secion,
hwaddr start, hwaddr size)
@@ -894,6 +1048,22 @@ static void kvm_log_sync(MemoryListener *listener,
}
}
+static void kvm_log_clear(MemoryListener *listener,
+ MemoryRegionSection *section)
+{
+ KVMMemoryListener *kml = container_of(listener, KVMMemoryListener, listener);
+ int r;
+
+ r = kvm_physical_log_clear(kml, section);
+ if (r < 0) {
+ error_report_once("%s: kvm log clear failed: mr=%s "
+ "offset=%"HWADDR_PRIx" size=%"PRIx64, __func__,
+ section->mr->name, section->offset_within_region,
+ int128_get64(section->size));
+ abort();
+ }
+}
+
static void kvm_mem_ioeventfd_add(MemoryListener *listener,
MemoryRegionSection *section,
bool match_data, uint64_t data,
@@ -985,6 +1155,7 @@ void kvm_memory_listener_register(KVMState *s, KVMMemoryListener *kml,
kml->listener.log_start = kvm_log_start;
kml->listener.log_stop = kvm_log_stop;
kml->listener.log_sync = kvm_log_sync;
+ kml->listener.log_clear = kvm_log_clear;
kml->listener.priority = 10;
memory_listener_register(&kml->listener, as);
@@ -1709,6 +1880,17 @@ static int kvm_init(MachineState *ms)
s->coalesced_pio = s->coalesced_mmio &&
kvm_check_extension(s, KVM_CAP_COALESCED_PIO);
+ s->manual_dirty_log_protect =
+ kvm_check_extension(s, KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2);
+ if (s->manual_dirty_log_protect) {
+ ret = kvm_vm_enable_cap(s, KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2, 0, 1);
+ if (ret) {
+ warn_report("Trying to enable KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 "
+ "but failed. Falling back to the legacy mode. ");
+ s->manual_dirty_log_protect = false;
+ }
+ }
+
#ifdef KVM_CAP_VCPU_EVENTS
s->vcpu_events = kvm_check_extension(s, KVM_CAP_VCPU_EVENTS);
#endif
@@ -15,4 +15,5 @@ kvm_irqchip_release_virq(int virq) "virq %d"
kvm_set_ioeventfd_mmio(int fd, uint64_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%" PRIx64 " val=0x%x assign: %d size: %d match: %d"
kvm_set_ioeventfd_pio(int fd, uint16_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%x val=0x%x assign: %d size: %d match: %d"
kvm_set_user_memory(uint32_t slot, uint32_t flags, uint64_t guest_phys_addr, uint64_t memory_size, uint64_t userspace_addr, int ret) "Slot#%d flags=0x%x gpa=0x%"PRIx64 " size=0x%"PRIx64 " ua=0x%"PRIx64 " ret=%d"
+kvm_clear_dirty_log(uint32_t slot, uint64_t start, uint32_t size) "slot#%"PRId32" start 0x%"PRIx64" size 0x%"PRIx32